Search

Mimicking the mechanical properties of native tissue is an important requirement for tissue engineering scaffolds. Blood vessels are subject to repetitive dilation and contraction and possess a special nonlinear mechanical property due to their triple-layered structure. Fabrication of vascular grafts consisting of bioresorbable materials with biomimetic mechanical properties is an urgent demand, as well as a critical challenge. Inspired by the configuration and function of collagen and elastin in native blood vessels, a new type of triple-layered vascular graft (TLVG) was developed in this study. The TLVGs were composed of braided silk as the inner layer, polyacrylamide (PAM) hydrogel as the middle layer, and electrospun thermoplastic polyurethane (TPU) as the outer layer. The woven-structured silk fibers were able to mimic the properties of the loosely distributed collagen fibers, while the highly elastic PAM hydrogel and TPU nanofibers mimicked the elasticity of elastin in the blood vessel. With this specially designed microstructure and combination of rigid and elastic materials, the TLVGs successfully mimicked the nonlinear mechanical property of native blood vessels. Moreover, TLVGs possess sufficient suture retention strength for surgical implantation. The introduction of a PAM hydrogel layer effectively solved the leaking issue for conventional porous vascular grafts and greatly enhanced the burst pressure. In addition, all materials used have high biocompatibility to human endothelial cells, which indicates that the developed TLVGs have high potential to be used as readily available vascular grafts., (Copyright © 2018. Published by Elsevier B.V.)

Soft and hard thermoplastic polyurethane (TPU) and their blends were electrospun to fabricate nanofibrous scaffolds with various properties in order to investigate the substrate property effects on cellular response. The scaffolds were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, water contact angle tests, and protein absorption tests. It was found that the hard segment content in the scaffold increased with the hard TPU ratio, which resulted in improved hydrophobicity and decreased over all protein absorption. 3T3 fibroblasts were cultured on those scaffolds to investigate the cellular response. On soft TPU scaffolds, the cells formed were round in shape and aggregated into clusters. However, on hard TPU scaffolds, the cells exhibited a spindle shape and spread out on the scaffolds, indicating preferred cell-substrate interaction. The cell viability and proliferation of cells on hard scaffolds were higher than on soft scaffolds and on 50% hard/50% soft scaffolds., (© 2014 Wiley Periodicals, Inc.)

In this work, scaffolds with a shish-kebab (SK) structure formed by poly(ε-caprolactone) (PCL) nanofibers and chitosan-PCL (CS-PCL) copolymers were prepared via electrospinning and subsequent crystallization for bone tissue engineering applications. The aim of this study was to introduce nanosized topography and the high biocompatibility of chitosan onto PCL nanofibers to enhance cell affinity to PCL scaffolds. CS-PCL copolymers with various ratios were synthesized, and then spontaneously crystallized as kebabs onto the electrospun PCL fibers, which acted as shishes. Scanning electron microscopy (SEM) results demonstrated that the copolymer with PCL to chitosan ratio of 8.8 could hierarchically decorate the PCL nanofibers and formed well-shaped kebabs on the PCL nanofiber surface. Water contact angle tests and biomimetic activity experiments revealed that the shish-kebab scaffolds with CS-PCL kebabs (PCL-SK(CS-PCL(8.8))) showed enhanced hydrophilicity and mineralization ability compared with smooth PCL and PCL-SK(PCL) shish-kebab scaffolds. Osteoblast-like MG63 cells cultured on the PCL-SK(CS-PCL(8.8)) scaffolds showed optimizing cell attachment, cell viability, and metabolic activity, demonstrating that this kind of scaffold has potential applications in bone tissue engineering.

In this study, parallel-aligned poly(propylene carbonate) (PPC) microfibers with a fiber diameter of 1.48±0.42 μm were prepared by electrospinning and modified by oxygen plasma treatment. Next, chitosan nanofibers with a fiber diameter size of 278±98 nm were introduced into the PPC fiber mats by freeze drying. Morphological analyses showed that the PPC scaffolds treated with 0.05 mg/ml chitosan solution provided the best micro and nanofiber structure with abundant chitosan nanofibers but without the formation of films. Surface chemical properties were analyzed by X-ray photoelectron spectroscopy (XPS). The initial water contact angle of the scaffolds decreased from 122.3±0.4° for neat PPC scaffolds to 53.8±1.6° for scaffolds with plasma treatment and chitosan nanofibers. The mechanical properties of the scaffolds were affected by plasma treatment with Young's modulus experiencing a reduction of 63%. Meanwhile, Young's modulus experienced a 26% improvement after the introduction of chitosan nanofibers. Fibroblast cells were cultured on the scaffolds to study the effects of both the plasma treatment and the introduction of chitosan nanofibers on cell adhesion, proliferation, and morphology. The scaffolds with PPC microfibers and chitosan nanofibers showed a superior cell response in terms of cell attachment, cell proliferation, and cell-scaffold interactions over the other scaffolds., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Unidirectionally and orthogonally aligned thermoplastic polyurethane (TPU) nanofibers were electrospun using a custom-built electrospinning device. The unidirectionally aligned fibers were collected using two parallel copper plates, and the orthogonally aligned fibers were collected using two orthogonal sets of parallel copper plates with alternate negative connections. Carbon nanotubes (CNT) and polyacrylic acid (PAA) were added to modify the polymer solution. It was found that both CNT and PAA were capable of increasing solution conductivity. The TPU/PAA fiber showed the highest degree of fiber orientation with more than 90% of the fibers having an orientation angle between -10° and 10° for unidirectionally aligned fibers, and for orthogonally aligned fibers, the orientation angle of 50% fibers located between -10° and 10° and 48% fibers located between 80° and 100°. Viability assessment of 3T3 fibroblasts cultured on TPU/PAA fibers suggested that the material was cytocompatible. The cells' orientation and migration direction closely matched the fibers' orientation. The cell migration velocity and distance were both enhanced with the guidance of fibers compared with cells cultured on random fibers and common tissue culture plastic. Controlling cell migration velocity and directionality may provide ways to influence differentiation and gene expression and systems that would allow further exploration of wound repair and metastatic cell behavior., (© 2014 Wiley Periodicals, Inc.)