Search

In this work, new composite films were prepared by incorporating the disintegrated bacterial cellulose (BCd) nanofibers and cerium oxide nanoparticles into chitosan (CS) matrices. The influence of the amount of nanofillers on the structure and properties of the polymer composites and the specific features of the intermolecular interactions in the materials were determined. An increase in film stiffness was observed as a result of reinforcing the CS matrix with BCd nanofibers: the Young's modulus increased from 4.55 to 6.3 GPa with the introduction of 5% BCd. A further increase in Young's modulus of 6.7 GPa and a significant increase in film strength (22% increase in yield stress compared to the CS film) were observed when the BCd concentration was increased to 20%. The amount of nanosized ceria affected the structure of the composite, followed by a change in the hydrophilic properties and texture of the composite films. Increasing the amount of nanoceria to 8% significantly improved the biocompatibility of the films and their adhesion to the culture of mesenchymal stem cells. The obtained nanocomposite films combine a number of favorable properties (good mechanical strength in dry and swollen states, improved biocompatibility in relation to the culture of mesenchymal stem cells), which allows us to recommend them for use as a matrix material for the culture of mesenchymal stem cells and wound dressings.

Hydrophobic up-conversion nanocomposite films have been developed based on TEMPO-oxidized cellulose nanofibrils (TOCNF) modified with alkyl ketene dimer (AKD) as a matrix and MF 2 :Ho (M = Ca, Sr) as a phosphor. Fabrication of homogeneous, strong and translucent TOCNF/MF 2 :Ho-AKD films with water contact angle of 123 ± 2° was accomplished with mild drying at 110 °C. These hydrophobic nanocomposite films demonstrated stable up-conversion luminescence in the visible spectral range upon excitation of the 5 I 7 level of Ho 3+ ions by laser irradiation at 1912 nm both under ambient conditions and in a humid atmosphere (92 ± 2% humidity). The absence of luminescence quenching in a high humidity atmosphere for TOCNF/MF 2 :Ho-AKD composite films was considered to be due to the reliable shielding effect of the hydrophobic TOCNF-AKD matrix. The films show promise for visualizing 2 μm laser radiation in medicine and monitoring of the atmosphere., (Copyright © 2020. Published by Elsevier Ltd.)

A new biocompatible nanocomposite film material for cell engineering and other biomedical applications has been prepared. It is based on the composition of natural polysaccharides filled with cerium oxide nanoparticles (CeONPs). The preparative procedure consists of successive impregnations of pressed bacterial cellulose (BC) with a sodium alginate (ALG) solution containing nanoparticles of citrate-stabilized cerium oxide and a chitosan (CS) solution. The presence of CeONPs in the polysaccharide composite matrix and the interaction of the nanoparticles with the polymer, confirmed by IR spectroscopy, change the network architecture of the composite. This leads to noticeable changes in a number of properties of the material in comparison with those of the matrix's polysaccharide composition, viz., an increase in mechanical stiffness, a decrease in the degree of planar orientation of BC macrochains, an increase in hydrophilicity, and the shift of the processes of thermo-oxidative destruction of the material to a low-temperature region. The latter effect is considered to be caused by the redox activity of cerium oxide (reversible transitions between the states Ce4+ and Ce3+) in thermally stimulated processes in the nanocomposite films. In the equilibrium swollen state, the material retains a mechanical strength at the level of ~2 MPa. The results of in vitro tests (cultivation of multipotent mesenchymal stem cells) have demonstrated the good biocompatibility of the BC-ALG(CeONP)-CS film as cell proliferation scaffolds. [ABSTRACT FROM AUTHOR]

A technique for the fabrication of bacterial cellulose-based films with CeO2 nanofiller has been developed. The structural and morphological characteristics of the materials have been studied, their thermal and mechanical properties in dry and swollen states having been determined. The preparation methodology makes it possible to obtain composites with a uniform distribution of nanoparticles. The catalytic effect of ceria, regarding the thermal oxidative destruction of cellulose, has been confirmed by TGA and DTA methods. An increase in CeO2 content led to an increase in the elastic modulus (a 1.27-fold increase caused by the introduction of 5 wt.% of the nanofiller into the polymer) and strength of the films. This effect is explained by the formation of additional links between polymer macro-chains via the nanoparticles' surface. The materials fabricated were characterized by a limited ability to swell in water. Swelling caused a 20- to 30-fold reduction in the stiffness of the material, the mechanical properties of the films in a swollen state remaining germane to their practical use. The application of the composite films in cell engineering as substrates for the stem cells' proliferation has been studied. The increase in CeO2 content in the films enhanced the proliferative activity of embryonic mouse stem cells. The cells cultured on the scaffold containing 5 wt.% of ceria demonstrated increased cell survival and migration activity. An analysis of gene expression confirmed improved cultivation conditions on CeO2-containing scaffolds. [ABSTRACT FROM AUTHOR]

For the first time, electroactive nanocomposite elastomers based on polydimethylsiloxane and filled with rod-like α-MnO2 nanoparticles have been obtained. The curing of the filled elastomer in an electric field, resulting in the ordering of the α-MnO2 particles, had a significant effect on the degree of polymer crosslinking, as well as on the electrorheological characteristics of the nanocomposites obtained through this process, namely the values of the storage and loss moduli. The dielectric spectra of filled elastomers in the frequency range 25–106 Hz were analysed in terms of interfacial relaxation processes. It has been shown, for the first time, that the application of an electric field leads to a decrease in the value of the Payne effect in composite elastomers. Analysis of the rheological effect in the obtained materials has demonstrated the possibility of designing highly efficient electrorheological elastomers that change their elastic properties by 4.3 times in electric fields of up to 2 kV/mm. [ABSTRACT FROM AUTHOR]

To design novel polymer materials with optimal properties relevant to industrial usage, it would seem logical to modify polymers with reportedly good functionality, such as polyimides (PIs). We have created a set of PI-based nanocomposites containing binary blends of CeO2 with carbon nanoparticles (nanocones/discs or nanofibres), to improve a number of functional characteristics of the PIs. The prime novelty of this study is in a search for a synergistic effect amidst the nanofiller moieties regarding the thermal and the mechanical properties of PIs. In this paper, we report on the structure, thermal, and mechanical characteristics of the PI-based nanocomposites with binary fillers. We have found that, with a certain composition, the functional performance of a material can be substantially improved. For example, a PI containing SO2-groups in its macrochains not only had its thermal stability enhanced (by ~20 °C, 10% weight loss up to 533 °C) but also had its stiffness increased by more than 10% (Young's modulus as high as 2.9–3.0 GPa) in comparison with the matrix PI. In the case of a PI with no sulfonic groups, binary fillers increased stiffness of the polymer above its glass transition temperature, thereby widening its working temperature range. The mechanisms of these phenomena are discussed. Thus, this study could contribute to the design of new composite materials with controllable and improved functionality. [ABSTRACT FROM AUTHOR]