Search

This study devised a label-free electrochemical immunosensor for the quantitative detection of alpha-fetoprotein (AFP). 3-Polythiophene acetic acid (3-PTAA) nanoparticles were anchored onto a few-layer graphene (FLG) nanosheet, and the resulting nanocomposite was utilized as the immunosensor platform. The AFP antibody (anti-AFP) was immobilized on 3-PTAA@FLG via a covalent interaction between the amine group of anti-AFP and the carboxylic group of 3-PTAA via ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC)/ N -hydroxysuccinimide (NHS) coupling. FLG is largely responsible for providing electrochemical signals, whereas 3-PTAA nanoparticles are well-known for their ability to be compatible with biological molecules in neutral aqueous solutions. Moreover, the carboxyl group present in 3-PTAA effectively binds anti-AFP through EDC/NHS conjugation. Owing to good dispersibility and higher surface area of 3-PTAA, it is very convenient for casting the polymer directly on the electrode substrate followed by immobilization of anti-AFP. Thus, it is feasible to regulate the activity of AFP proteins and control the spatial distribution of the immobilized anti-AFP proteins. The electrochemical sensing performance was assessed via cyclic voltammetry and electrochemical impedance spectroscopy. For an increase in the bioconjugate concentration, the results demonstrated a surge in charge-transfer resistance and a consequent decline in the current response. This approach effectively detected AFP at an extended dynamic range of 0.0001-250 ng/mL with a detection limit of 0.047 pg/mL. Furthermore, the sensing capacity of the immunosensor for AFP detection has been demonstrated to be steady in real human serum cultures. Our approach exhibits good electrochemical performance in terms of reproducibility, selectivity, and stability, which would surely impart budding applications in the clinical diagnosis of several other tumor markers.

In this work, a novel electrochemical immunosensor based on nitrogen doped graphene quantum dot (N-GQD) and single-walled carbon nanohorns (SWCNHs) was developed for the detection of α-fetoprotein (AFP), a cancer biomarker. Thus, to fabricate the platform of the immunosensor, nanocomposite architecture was developed by decorating N-GQD on the surface of the SWCNHs. The resulting hybrid architecture (N-GQD@SWCNHs) functioned as an exceptional base for the immobilization of antibody (Anti-AFP) through carbodiimide reaction with good stability and bioactivity. The immunosensor was prepared by evenly distributing the bioconjugates (N-GQD@SWCNHs/Anti-AFP) dispersion on the surface of the glassy carbon electrode, and subsequently blocking the remaining active sites by bovine serum albumin to prevent the nonspecific adsorption. Cyclic voltammetry and electrochemical impedance spectroscopy technique was employed to investigate the assembly process of the immunosensor. Under optimal conditions, the immunosensor exhibited a broad dynamic range in between 0.001 ng/mL to 200 ng/mL and a low detection limit of 0.25 pg/mL. Furthermore, the sensor showed high selectivity, desirable stability, and reproducibility. Measurements of AFP in human serum gave outstanding recovery within 99.2% and 102.1%. Thus, this investigation and the amplification strategy exhibited a potential role of the developed nanocomposite based sensor for early clinical screening of cancer biomarkers.

A green, efficient synthesis of cadmium oxide decorated reduced graphene oxide nanocomposites (RGO/CdO) was prepared by one-step co-precipitation and hydrothermal method. Crystalline nature of the nanocomposites was characterized by X-ray diffraction analysis. To evaluate the structural morphology and particle size, high resolution transmission electron microscopy were used. X-ray photoelectron spectroscopy, Raman spectroscopy and Fourier transform infrared spectroscopy techniques were employed to establish chemical structure of the nanocomposites and Atomic Force Microscopy was done to measure the thickness. The optical properties were evaluated by UV-visible absorption spectroscopy. Thermo-gravimetric analysis, BET surface area and zeta potential measurements were carried out to study the thermal and surface characteristics. The CdO nano-particles (NPs) decorated on RGO sheets exhibit better electrical conductivity compared to RGO. The antibacterial activity of the nanocomposites has also been monitored in different culture media imparting good potentiality than RGO., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Non-toxic nanocomposites based bio-films obtained from methylcellulose (MC) can reduce environmental problems associated with synthetic polymers. A new facile route for the isolation of cellulose nano-crystals (CNC) from jute waste is successfully utilized here. The fabrication of CNC reinforced MC nanocomposites by film casting technique and the studies of the effect of CNC on the properties of the MC based nanocomposites have been reported. The synthesized nanocomposites have shown improved UV resistance, mechanical, barrier, and thermal properties. FTIR results established the physicochemical compatibility between the drug, MC and CNC in nanocomposites. In vitro permeation studies performed by using Franz diffusion cell revealed diffusion mediated sustained drug release from the devices due to the presence of interaction between MC and CNC through H-bonding, electrostatic interaction between the hydrophilic polymer/CNC chains with the drug and the formation of tortuous path. The nanocomposites can be used for edible packaging and transdermal drug delivery., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

In recent times, biosynthetic approaches toward the synthesis of nanoparticles have been shown to have several advantages over physical and chemical methods. Here, we report the extracellular mycosynthesis of γ-Fe 2 O 3 nanoparticles by Alternaria alternata. The fungal biomass when exposed to aqueous iron(III) chloride solution led to the formation of highly stable γ-Fe 2 O 3 nanoparticles extracellularly. The influence of these biosynthesized γ-Fe 2 O 3 nanoparticles on the properties of hydroxyl propyl methyl cellulose was also investigated. Characterization of the biosynthesized γ-Fe 2 O 3 nanoparticles and HPMC-γ-Fe 2 O 3 nanocomposite films were done by the different types of spectral and electron microscopic analysis. The size of the γ-Fe 2 O 3 nanoparticles ranges from 75 to 650 nm. The mechanical effect of the agglomerated γ-Fe 2 O 3 nanoparticles into the HPMC polymer matrix was also investigated.

Films based on methylcellulose (MC) and pectin (PEC) of different ratios were prepared. MC/PEC (90:10) (MP10) gave the best results in terms of mechanical properties. Sodium montmorillonite (MMT) (1, 3 and 5 wt%) was incorporated in the MP10 matrix. The resulting films were characterized by X-ray diffraction and transmission electron microscopy, and it was found that nanocomposites were intercalated in nature. Mechanical studies established that addition of 3 wt% MMT gave best results in terms of mechanical properties. However, thermo-gravimetric and dynamic mechanical analysis proved that decomposition and glass transition temperature increased with increasing MMT concentration from 1 to 5 wt%. It was also observed that moisture absorption and water vapor permeability studies gave best result in the case of 3 wt% MMT. Optical clarity of the nanocomposite films was not much affected with loading of MMT. In vitro drug release studies showed that MC/PEC/MMT based films can be used for controlled transdermal drug delivery applications., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Polymeric nanocomposites embedded with nontoxic antimicrobial agents have recently gained potential industrial significance, mainly for their applicability to preserve food quality and ensure safety. In this study, a poly(butylene adipate-co-terephthalate) (PBAT)/organoclay (CMMT) based nanocomposite film doped with sodium benzoate (SB) as antimicrobial agent was prepared by a solution mixing process. A homogenous dispersion of organoclay (cetyltrimethylammonium-modified montmorillonite [CMMT]) in PBAT matrix was observed by X-ray diffraction and transmission electron microscopy. PBAT/CMMT nanocomposite film showed higher barrier properties against water and methanol vapor compared to the PBAT film. The release of SB from PBAT and its nanocomposite film was measured and the relevant data were fitted to the Weibull model. The higher values of Weibull's shape factor and scale parameter as corroborated by experimental findings indicated faster rate of SB release from PBAT/CMMT/SB nanocomposite film, when compared to the pristine PBAT film. Bacterial inhibition studies were accomplished against 2 food pathogenic bacteria, Bacillus subtilis and Staphylococcus aureus, by determining the zone of inhibition and corresponding growth profiles. Both bacterial inhibition studies and growth profiles established that PBAT/CMMT/SB demonstrated better antimicrobial activity than PBAT/SB film. Therefore, PBAT/CMMT/SB nanocomposite film can be used for food packaging application as it showed good barrier properties and antimicrobial activity against food pathogenic bacteria., (© 2015 Institute of Food Technologists®)

Graphene oxide (GO) was synthesized by Hummer's method and characterized by using Fourier transform infrared spectroscopy and Raman spectroscopy. The as synthesized GO was used to make GO/hydroxypropylmethylcellulose (HPMC) nanocomposite films by the solution mixing method using different concentrations of GO. The nanocomposite films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and thermo-gravimetric analysis. Mechanical properties, water absorption property and water vapor transmission rate were also measured. XRD analysis showed the formation of exfoliated HPMC/GO nanocomposites films. The FESEM results revealed high interfacial adhesion between the GO and HPMC matrix. The tensile strength and Young's modulus of the nanocomposite films containing the highest weight percentage of GO increased sharply. The thermal stability of HPMC/GO nanocomposites was slightly better than pure HPMC. The water absorption and water vapor transmission rate of HPMC film was reduced with the addition of up to 1 wt% GO., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Hydroxypropylmethylcellulose (HPMC)/montmorillonite (MMT) nanocomposite films are prepared by solution intercalation method. Mechanical, thermal, moisture absorption, optical clarity and water vapor permeability of HPMC/MMT nanocomposite films are measured. X-ray diffraction (XRD) and transmission electron microscopic (TEM) results establish formation of partially intercalated and partially exfoliated HPMC/MMT nanocomposite films. In presence of MMT, the tensile strength, tensile modulus and elongation at break of HPMC films are improved. The thermal stability of HPMC/MMT nanocomposites is better than pure HPMC. The moisture absorption of HPMC film measured in 75% of constant relative humidity is reduced with loading of MMT. Optical clarity of HPMC film is almost unaffected in presence of MMT. Water vapor permeability of HPMC decreases in presence of nanoclay due to increasing tortuous path for diffusion., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

In this paper we reported preparation of methylcellulose-silver nanocomposite films by mixing of aqueous solution of methylcellulose with silver nitrate followed by casting. The silver nanoparticles were generated in methylcellulose matrix through reduction and stabilization by methylcellulose. The surface plasmon band at 412 nm indicated the formation of Ag nanoparticles. The MC-Ag nanocomposite films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR). The X-ray diffraction analysis of synthesized MC-Ag nanocomposite films revealed that metallic silver was present in face centered cubic crystal structure. Average crystallite size of silver nanocrystal was 22.7 nm. The FTIR peaks of as-synthesized MC-Ag nanocomposite fully designated the strong interaction between Ag nanoparticles and MC matrix. Nano-sized silver modified methylcellulose showed enhanced mechanical properties i.e. the introduction of Ag leading to both strengthening and toughening of MC matrix. The methylcellulose-silver nanocomposite films offered excellent antimicrobial activity against various microorganisms., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Active packaging is one of the interesting concepts in food industry which extend the shelf-life of the food products. The purpose of this work was to develop nontoxic antimicrobial nanocomposite films. Benzyltrimethylammonium chloride modified montmorillonite (BMMT) were used as nano-filler and the prepared BMMT was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis. Polyethylene glycol (PEG) plasticized cellulose acetate butyrate (CAB) films with different ratios of PEG and CAB was prepared and it was found that the 20 wt% PEG in CAB matrix (CBP 20 ) gave optimal results in terms of mechanical properties. BMMT was mixed with CBP 20 in different proportions to prepare nanocomposites. 3 wt% BMMT loaded nanocomposite gave best in terms of the barrier and mechanical properties. The storage modulus, thermal stability, glass transition, and melting temperature of the nanocomposites increased with the loading of 1, 3, and 5 wt% of BMMT. Furthermore, these nanocomposites showed nontoxic and antimicrobial behavior. [ABSTRACT FROM AUTHOR]

Abstract: Nanocomposites of poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP) and sodium montmorillonite (Na+MMT) were prepared by solution mixing and then cast into films. X-ray diffraction analysis and images of transmission electron microscopy establish the formation of PVA/Na+MMT intercalated nanocomposite. Exfoliated and highly intercalated PVA/PVP/Na+MMT nanocomposite formed in the presence of PVP. Inclusion of PVP in PVA/Na+MMT matrix enhances the hydrogen bonding interactions between PVA and Na+MMT and thus increases the mechanical properties and thermal stability of PVA/PVP/Na+MMT nanocomposites compared to PVA/Na+MMT nanocomposite. The interactions between PVA, PVP and Na+MMT were established by the Fourier transform infrared spectroscopy. The moisture absorption tendency of both the PVA and PVA/PVP films reduced after the incorporation of Na+MMT at 75% constant relative humidity. Differential scanning calorimetry studies show that the presence of PVP and Na+MMT both are responsible for reducing the heat of fusion, and crystallinity of PVA. The flow behavior of the PVA, PVA/PVP and its nanocomposite solutions has been also studied. Water vapor permeability of PVA/PVP/Na+MMT composite films decreased in the presence of nanoclay due to increasing tortuous paths for diffusion. [Copyright &y& Elsevier]

An environment-friendly approach for the synthesis of reduced graphene oxide/nickel oxide nanocomposites (RGO/NiO NCs) was done in a microwave via in-situ co-precipitation and hydrothermal mode. A non-toxic aqueous phytoextract was used as a reducing cum stabilizing agent. X-ray diffraction, Raman spectra, Fourier transform infrared spectroscopy analysis confirmed the chemical structure of the NCs. The morphological studies were investigated by scanning electron microscopy, high resolution transmission electron microscopy and energy disperse X-ray. The optical study was verified by UV–visible absorption spectroscopy. The photo-degradation activity was performed at visible light by exposing the methylene blue (MB) dye solution along with the NCs. Experimental result reveals the improved photo-catalytic activity of the NCs towards the photo-degradation of MB (93%) compare to pure NiO NPs (65%) and RGO (negligible). In the nanocomposites, the electronic charge transfer takes place superficially from NiO nanoparticles (NPs) to RGO, effectively delays the electron-hole pair (e − -h + ) recombination effect and increases the decomposition rate of the dye solution to some greater extent. The antibacterial activity of the NCs shows impressive potentiality in different culture media contrast with its constituent. • ➢ One step in-situ RGO/NiO nanocomposites has been synthesized adopting green route. • Psidium guajava L (guava) leaf extract is used as green reducing agent which is low cost and eco-friendly. • The nanocomposites shows better photocatalytic activity compared to NiO NPs and RGO. • Antibacterial activity of the nanocomposites is enhanced with respect to RGO and NiO NPs. [ABSTRACT FROM AUTHOR]