Search

Injectable nanocomposites made of biodegradable poly(propylene fumarate) and the crosslinking agent propylene fumarate-diacrylate as well as each of three forms of single-walled carbon nanotubes (SWNTs) were evaluated for their in vitro cytotoxicity. Unreacted components, crosslinked networks, and degradation products of the nanocomposites were investigated for their effects on cell viability using a fibroblast cell line in vitro. The results did not reveal any in vitro cytotoxicity for purified SWNTs, SWNTs functionalized with 4-tert-butylphenylene, and ultra-short SWNTs at 1- 100 microg/mL concentrations. Moreover, nearly 100% cell viability was observed on all crosslinked nanocomposites and cell attachment on their surfaces was comparable with that on tissue culture polystyrene. The degradation products of the nanocomposites displayed a dose-dependent adverse effect on cells, which was partially due to increased osmolarity by the conditions of accelerated degradation and could be overcome at diluted concentrations. These results demonstrate that all three tested nanocomposites have favorable cytocompatibility for potential use as scaffolds for bone tissue engineering applications.

We investigated the fabrication of highly porous scaffolds made of three different materials [poly(propylene fumarate) (PPF) polymer, an ultra-short single-walled carbon nanotube (US-tube) nanocomposite, and a dodecylated US-tube (F-US-tube) nanocomposite] in order to evaluate the effects of material composition and porosity on scaffold pore structure, mechanical properties, and marrow stromal cell culture. All scaffolds were produced by a thermal-crosslinking particulate-leaching technique at specific porogen contents of 75, 80, 85, and 90 vol%. Scanning electron microcopy, microcomputed tomography, and mercury intrusion porosimetry were used to analyze the pore structures of scaffolds. The porogen content was found to dictate the porosity of scaffolds. There was no significant difference in porosity, pore size, and interconnectivity among the different materials for the same porogen fraction. Nearly 100% of the pore volume was interconnected through 20microm or larger connections for all scaffolds. While interconnectivity through larger connections improved with higher porosity, compressive mechanical properties of scaffolds declined at the same time. However, the compressive modulus, offset yield strength, and compressive strength of F-US-tube nanocomposites were higher than or similar to the corresponding properties for the PPF polymer and US-tube nanocomposites for all the porosities examined. As for in vitro osteoconductivity, marrow stromal cells demonstrated equally good cell attachment and proliferation on all scaffolds made of different materials at each porosity. These results indicate that functionalized ultra-short single-walled carbon nanotube nanocomposite scaffolds with tunable porosity and mechanical properties hold great promise for bone tissue engineering applications.

This study investigates the effects of nanostructure size and surface area on the rheological properties of un-cross-linked poly(propylene fumarate) (PPF) nanocomposites and the mechanical properties of cross-linked nanocomposites as a function of the nanostructure loading. Three model carbon nanostructures were examined, C(60) fullerenes, ultra-short single-walled carbon nanotubes (US-tubes) and single-walled carbon nanotubes (SWNTs). Rheological measurements showed that C60 and US-tube un-cross-linked nanocomposites exhibited viscous-like characteristics with the complex viscosity independent of frequency for nanostructure concentrations up to 1 wt%. Compressive and flexural mechanical testing demonstrated significant mechanical reinforcement of US-tube and SWNT nanocomposites as compared to cross-linked polymer alone, with an up to twofold increase in the mechanical properties. Scanning electron microscopy examination of the fracture surface of cross-linked US-tube nanocomposite revealed lack of aggregation of US-tubes. Although sol fraction studies did not provide any evidence of additional cross-linking, due to the presence of US-tubes in the nanocomposites, transmission electron microscopy studies suggested the crystallization of PPF on the surface of US-tubes which can contribute to the mechanical reinforcement of the US-tube nanocomposites. These results demonstrate that the rheological properties of un-cross-linked nanocomposites depend mainly on the carbon nanostructure size, whereas the mechanical properties of the cross-linked nanocomposites are dependent on the carbon nanostructure surface area. The data also suggest that US-tube nanocomposites are suitable for further consideration as injectable scaffolds for bone tissue engineering applications.

This work investigated the effects of the use of a surfactant or the functionalization of single-walled carbon nanotubes (SWNTs) on their dispersion in uncrosslinked poly(propylene fumarate) (PPF) and the mechanical reinforcement of crosslinked composites as a function of the SWNT concentration. Rheological measurements showed good dispersion of SWNTs in uncrosslinked PPF at low concentrations of 0.05 wt% and SWNT aggregation for higher concentrations for all formulations examined. Mechanical testing demonstrated significant reinforcement in the compressive and flexural mechanical properties of crosslinked nanocomposites which peaked for low SWNT concentrations of the order of 0.05 wt%. For example, a 74% increase was recorded for the compressive modulus and a 69% increase for the flexural modulus of nanocomposites with functionalized SWNTs at a 0.05 wt% loading. Nevertheless, this reinforcement was not related to the use of a surfactant or the functionalization of the SWNTs tested. Scanning electron microscopy examinations of fractured nanocomposite surfaces revealed the formation of SWNT aggregates at higher concentrations corroborating the rheological and mechanical data. These results suggest that the dispersion of individual SWNTs in a uncrosslinked formulation is pivotal to the development of injectable nanocomposites for bone tissue engineering applications.

We report about the in vitro cytotoxicity and MRI studies of Gd(3+)ions-doped ultra-short single-walled carbon nanotube (gadonanotubes), gadonanotubes- reinforced poly(lactic-co-glycolic acid) (PLGA) polymer nanocomposites and in vivo small animal MRI studies using the gadonanotubes. These studies were performed to explore the suitability of gadonanotubes-reinforced PLGA polymer nanocomposite as a model scaffold for noninvasive magnetic resonance imaging (MRI) to evaluate nanotube release during the degradation process of the scaffold and their biodistribution upon release from the polymer matrix in vivo. The gadonanotubes at 1-100 ppm and the gadonanotubes/PLGA nanocomposites (2 wt % gadonanotubes) did not show any cytotoxicity in vitro as demonstrated using the LIVE/DEAD viability assay. For the first time, r(2) relaxivity measurements were obtained for the superparamagnetic gadonanotubes. In vitro 7T MRI of the superparamagnetic gadonanotubes ([Gd] = 0.15 mM) suspended in a biocompatible 1% Pluronic F127 solution, gave a r(2) value of 578 mM(-1) s(-1). Upon subcutaneous injection of the gadonanotubes suspension into the dorsal region of rats, the high r(2) value translated into excellent and prolonged negative contrast enhancement of in vivo T(2)weighted proton MRI images. The in vitro characterization of the nanocomposite discs and their degradation process by MRI, showed strong influence of the gadonanotube on water proton relaxations. These results indicate that the gadonanotubes/PLGA nanocomposites are suitable for further in vivo studies to track by MRI the biodegradation release and biodistribution of gadonanotubes.

Contains fulltext : 69781.pdf (Publisher’s version ) (Closed access) Scaffolds play a pivotal role in the tissue engineering paradigm by providing temporary structural support, guiding cells to grow, assisting the transport of essential nutrients and waste products, and facilitating the formation of functional tissues and organs. Single-walled carbon nanotubes (SWNTs), especially ultra-short SWNTs (US-tubes), have proven useful for reinforcing synthetic polymeric scaffold materials. In this article, we report on the in vivo biocompatibility of US-tube reinforced porous biodegradable scaffolds in a rabbit model. US-tube nanocomposite scaffolds and control polymer scaffolds were implanted in rabbit femoral condyles and in subcutaneous pockets. The hard and soft tissue response was analyzed with micro-computed tomography (micro CT), histology, and histomorphometry at 4 and 12 weeks after implantation. The porous US-tube nanocomposite scaffolds exhibited favorable hard and soft tissue responses at both time points. At 12 weeks, a three-fold greater bone tissue ingrowth was seen in defects containing US-tube nanocomposite scaffolds compared to control polymer scaffolds. Additionally, the 12 week samples showed reduced inflammatory cell density and increased connective tissue organization. No significant quantitative difference in polymer degradation was observed among the various groups; qualitative differences between the two time points were consistent with expected degradation due to the progression of time. Although no conclusions can be drawn from the present study concerning the osteoinductivity of US-tube nanocomposite scaffolds, the results suggest that the presence of US-tubes may render nanocomposite scaffolds bioactive assisting osteogenesis.

We have investigated the dispersion of single-walled carbon nanotubes (SWNTs) and functionalized SWNTs (F-SWNTs) in the unsaturated, biodegradable polymer poly(propylene fumarate) (PPF) and examined the rheological properties of un-cross-linked nanocomposite formulations as well as the electrical and mechanical properties of cross-linked nanocomposites. F-SWNTs were produced from individual SWNTs by a diazonium-based method and dispersed better than unmodified SWNTs in both un-cross-linked and cross-linked PPF matrix. Cross-linked nanocomposites with F-SWNTs were superior to those with unmodified SWNTs in terms of their mechanical properties. Specifically, nanocomposites with 0.1 wt % F-SWNTs loading resulted in a 3-fold increase in both compressive modulus and flexural modulus and a 2-fold increase in both compressive offset yield strength and flexural strength when compared to pure PPF networks, whereas the use of 0.1 wt % SWNTs gained less than 37% mechanical reinforcement. These extraordinary mechanical enhancements considered together with Raman scattering and sol fraction measurements indicate strong SWNT-PPF interactions and increased cross-linking densities resulting in effective load transfer. With enhanced mechanical properties and capabilities of in situ injection and cross-linking, these SWNT/polymer nanocomposites hold significant implications for the fabrication of bone tissue engineering scaffolds.