Search

The aim of this study was to assess the agreement of three different automated methods of identifying force-onset (40 N, 5 SDs, and 3 SDs) with manual identification, during the isometric mid-thigh pull (IMTP). Fourteen resistance-trained participants with >6 months experience training with the power clean volunteered to take part. After three familiarisation sessions, the participants performed five maximal IMTPs separated by 1 min of rest. Fixed bias was found between 40 N and manual identification for time at force-onset. No proportional bias was present between manual identification and any automated threshold. Fixed bias between manual identification and automated was present for force at onset and F150. Proportional but not fixed bias was found for F50 between manual identification and all automated thresholds. Small to moderate differences (Hedges g = −0.487- −0.692) were found for F90 between all automated thresholds and manual identification, while trivial to small differences (Hedges g = −0.122—−0.279) were found between methods for F200 and F250. Based on these results, strength and conditioning practitioners should not use a 40 N, 5 SDs, or 3 SDs threshold interchangeably with manual identification of force-onset when analysing IMTP force–time curve data. [ABSTRACT FROM AUTHOR]

Background: Increases in maximal strength and muscle volume represent central aims of training interventions. Recent research suggested that the chronic application of stretch may be effective in inducing hypertrophy. The present systematic review therefore aimed to syntheisize the evidence on changes of strength and muscle volume following chronic static stretching. Methods: Three data bases were sceened to conduct a systematic review with meta-analysis. Studies using randomized, controlled trials with longitudinal (≥ 2 weeks) design, investigating strength and muscle volume following static stretching in humans, were included. Study quality was rated by two examiners using the PEDro scale. Results: A total of 42 studies with 1318 cumulative participants were identified. Meta-analyses using robust variance estimation showed small stretch-mediated maximal strength increases (d = 0.30 p < 0.001) with stretching duration and intervention time as significant moderators. Including all studies, stretching induced small magnitude, but significant hypertrophy effects (d = 0.20). Longer stretching durations and intervention periods as well as higher training frequencies revealed small (d = 0.26–0.28), but significant effects (p < 0.001–0.005), while lower dosage did not reach the level of significance (p = 0.13–0.39). Conclusions: While of minor effectiveness, chronic static stretching represents a possible alternative to resistance training when aiming to improve strength and increase muscle size. As a dose-response relationship may exist, higher stretch durations and frequencies as well as long program durations should be further elaborated. Key Points: •While animal research consistently showed chronic stretch-mediated hypertrophy and strength increases, literature in humans draws an inconclusive picture, possibly due to lack of comparability of stretching parameters, such as duration and frequency. •Our systematic review is the first that included studies using comparable stretching durations of up to two hours in humans, which showed small magnitude maximal strength increases and muscle hypertrophy. •Even though less effective, high volume stretching might provide a sufficient alternative to strength training when aiming to induce muscle hypertrophy and strength increases. It must be noted that comparatively high training effort is opposed by comparatively small adaptations, suggesting a preference for the more efficient strength training if applicable. [ABSTRACT FROM AUTHOR]

Isometric strength training has been reported to benefit various sport-related dynamic performances. However, it is still unknown whether performing isometric strength training at single or multiple joint angles would elicit greater benefit. Purpose: To compare the effects of isometric bench press performed at single (SIBP) and multiple (MIBP) joint angles on dynamic strength and overhead throwing performance. Methods: Sixteen male softball and baseball athletes performed overhead throwing, 1-repetition-maximum (1RM) bench press, and ballistic push-up during pretest and posttest. They were then randomly assigned to either SIBP or MIBP to undergo 12 strength training sessions. During the training, isometric bench press was performed at only 90° elbow angle for SIBP but at 60°, 90°, and 120° elbow angles for MIBP. Results: A significant main time effect was observed for bench press 1RM (P =.003) and relative 1RM (P <.001). Similarly, a significant main time effect was observed for ballistic push-up peak power only (P =.037). There was no significant change in overhead throwing velocity in either group. There was also no significant difference in change in all measures between groups. However, a moderate effect in favor of MIBP was observed for change in ballistic push-up peak power (P =.180, g = 0.67). Conclusions: Based on the current findings, the inclusion of both SIBP and MIBP were equally beneficial to maximal strength development. However, performing MIBP had a greater effect on power development. [ABSTRACT FROM AUTHOR]

The aim of this study was to compare the peak force (PF), peak power (PP), and peak velocity (PV) outputs produced during half-squat (HS) and jump squat (JS) exercises executed at 20, 40, 60, and 80% of 1 repetition maximum (1RM) in the HS (HS 1RM) and to compute and compare the strength deficit (SDef) achieved in these exercises across these loads. Twenty-four national rugby union players (age: 25.7 ± 3.6 years) performed HS 1RM and a progressive loading test in the HS and JS exercises. The PF, PP, and PV values were obtained in all loads for both exercises, and the SDef was calculated as the percentage difference between the PF at distinct relative intensities and the PF at HS 1RM. The differences in HS and JS variables were determined using an analysis of variance with repeated measures. Higher PF, PP, and PV outputs were generated in the JS in comparison with the HS exercise (p < 0.05); moreover, the SDef magnitudes were significantly lower in the JS (p < 0.01), for all loading conditions. Importantly, the differences in SDef, and as a consequence, PF, PP, and PV decreased progressively with increasing load. Overall, the loaded JS exhibited increased levels of PF, PP, and PV and reduced levels of SDef when compared to the traditional HS performed across a range of loads. The JS is indicated to reduce the SDef and improve the athletes’ ability to apply force at higher velocities. Nevertheless, with heavier loads (i.e.,≥80% HS 1RM), its potential advantages and effectiveness may be seriously compromised. [ABSTRACT FROM AUTHOR]

The purposes of this study were to investigate the acute effects of resistance training protocol on kinetic changes in squat jump (SJ), shortened isometric mid-thigh pull (IMTP), and isometric squat (ISQ) and to examine the relationship of dynamic maximum strength with performance changes over 48 hours in resistance-trained individuals. Participants completed performance tests at pre-, post-24 hours, and post-48 hours resistance training protocol (Baseline, Post24, and Post48). The training protocol consisted of 5 sets of 10 repetitions of back squat (BSQ) at 60% of 1 repetition maximum (1RM). SJ variables included jump height (JH), peak power (PP), and relative PP. For the IMTP and ISQ, isometric peak force (IPF), relative IPF, rate of force development at 250 milliseconds (RFD250), and impulse at 250 milliseconds (IMP250) were calculated. Significant decreases were observed from Baseline to Post24 (p = 0.023, Cohen's dz effect size [dz] = 1.00) and Post48 (p = 0.032, dz = 0.94) in SJ JH. IMTP IMP250 significantly decreased from Baseline to Post48 (p = 0.046, dz = 0.88). Significant negative correlation was found between relative 1RM BSQ and the changes from Baseline to Post48 in ISQ RFD250 (p = 0.046,r = −0.61). Acute performance decreases might remain until 48 hours after resistance training in explosive strength and impulse regardless of isometric testing type. [ABSTRACT FROM AUTHOR]

The velocity loss method is often used in velocity–based training (VBT) to dynamically regulate training loads. However, the effects of velocity loss on maximum strength development and training efficiency are still unclear. Therefore, we conducted a dose–response meta–analysis aiming to fill this research gap. A systematic literature search was performed to identify studies on VBT with the velocity loss method via PubMed, Web of Science, Embase, EBSCO, and Cochrane. Controlled trials that compared the effects of different velocity losses on maximum strength were considered. One–repetition maximum (1RM) gain and 1RM gain per repetition were the selected outcomes to indicate the maximum strength development and its training efficiency. Eventually, nine studies with a total of 336 trained males (training experience/history ≥ 1 year) were included for analysis. We found a non–linear dose–response relationship (reverse U–shaped) between velocity loss and 1RM gain (pdose–response relationship < 0.05, pnon–linear relationship < 0.05). Additionally, a negative linear dose–response relationship was observed between velocity loss and 1RM gain per repetition (pdose–response relationship < 0.05, pnon–linear relationship = 0.23). Based on our findings, a velocity loss between 20 and 30% may be beneficial for maximum strength development, and a lower velocity loss may be more efficient for developing and maintaining maximum strength. Future research is warranted to focus on female athletes and the interaction of other parameters. [ABSTRACT FROM AUTHOR]

Purpose: To compare the associations between optimum power loads and 1-repetition-maximum (1RM) values (assessed in half-squat and jump-squat exercises) and multiple performance measures in elite athletes. Methods: Sixty-one elite athletes (15 Olympians) from 4 different sports (track and field [sprinters and jumpers], rugby sevens, bobsled, and soccer) performed squat and countermovement jumps, half-squat exercise (to assess 1RM), half-squat and jump-squat exercises (to assess bar-power output), and sprint tests (60 m for sprinters and jumpers and 40 m for the other athletes). Pearson product–moment correlation test was used to determine relationships between 1RM and bar-power outputs with vertical jumps and sprint times in both exercises. Results: Overall, both measurements were moderately to near perfectly related to speed performance (r values varying from −.35 to −.69 for correlations between 1RM and sprint times, and from −.36 to −.91 for correlations between bar-power outputs and sprint times; P <.05). However, on average, the magnitude of these correlations was stronger for power-related variables, and only the bar-power outputs were significantly related to vertical jump height. Conclusions: The bar-power outputs were more strongly associated with sprint-speed and power performance than the 1RM measures. Therefore, coaches and researchers can use the bar-power approach for athlete testing and monitoring. Due to the strong correlations presented, it is possible to infer that meaningful variations in bar-power production may also represent substantial changes in actual sport performance. [ABSTRACT FROM AUTHOR]

The purposes of this study were to investigate intrasession and intersession reliability of variables obtained from squat jump (SJ), shortened isometric midthigh pull (IMTP), and isometric squat (ISQ) protocols and to evaluate relationships between isometric and dynamic performance and 1 repetition maximum (1RM) back squat (BSQ). Eleven moderately resistance-trained men participated (27.8 ± 3.9 years; 175.0 ± 7.2 cm; 87.2 ± 11.4 kg). Subjects completed familiarization in the IMTP and ISQ, followed by 1RM BSQ at least 48 hours before the first performance test. Two performance tests occurred at 7-day intervals including SJ, IMTP, and ISQ. SJ variables included jump height (SJH), body mass (BM), peak force (PF), and peak power (PP). Isometric midthigh pull and ISQ variables included isometric peak force (IPF); relative IPF; rate of force development at 90, 200, and 250 milliseconds; and impulse at 90, 200, and 250 milliseconds. SJ, IMTP, and ISQ kinetic variables were considered reliable if intraclass correlations (ICCs) and coefficients of variations (CVs) were >0.80 and <10%. Intrasession and intersession reliability criteria were met for SJH, BM, PF, and PP (ICC = 0.91-1.00, CV = 0.5-9.1%). Isometric peak force and impulse at 200 and 250 milliseconds met intrasession and intersession reliability criteria for IMTP and ISQ (ICC = 0.90-0.99, CV = 2.1-8.1%). Significant large correlation was observed between 1RM BSQ and ISQ peak force (p = 0.038, r = 0.63), but not between 1RM BSQ and shortened IMTP peak force (p = 0.11, r = 0.50). Shortened IMTP and ISQ peak force and impulse are reliable kinetic variables, and ISQ peak force is indicative of 1RM BSQ in moderately resistance-trained men. [ABSTRACT FROM AUTHOR]

Copyright of Al.Qadisiya journal for the Sciences of Physical Education is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Kotani, Y, Lake, J, Guppy, SN, Poon, W, Nosaka, K, Hori, N, and Haff, GG. The reliability of the squat jump force-velocity and load-velocity profiles. J Strength Cond Res 36(11): 3000–3007, 2022—The purpose of this study was to investigate the between-session reliability of the squat jump force-velocity (FV) and load-velocity (LV) profiles. Eighteen subjects (age = 28.1 ± 4.8 years; height = 1.7 ± 9.7; body mass = 74.7 ± 12.8) who could back squat >1.5 times body mass participated in this study. Each subject completed a familiarization session, followed by 2 experimental sessions each separated by 72 hours. Subjects performed a series of squat jumps on a force plate against external loads between 0 and 100% of their body mass in a quasi-randomized block order. Intraclass correlation coefficient (ICC) and coefficient of variation (CV) were used to examine the between-session reliability. Peak velocity (PV) and mean velocity (MV) at each load were highly reliable (ICC >0.80, CV% <7.41, SEM <0.13 m·s−1, smallest detectable difference [SDD] <0.31 m·s−1, ES <0.21). Force-velocity profiles created with peak force and relative peak force resulted in poor to excellent reliability (ICC = 0.34–0.92, CV% = 11.9–26.3). When mean and relative mean forces were used to create FV profiles, there was poor to good reliability (ICC = 0.03–0.85, CV% = 18.1–39.4). When the LV profile was calculated with PV (ICC = 0.60–0.90, CV% = 7.9–16.9) or MV (ICC = 0.49–0.91, CV% = 11.1–23.4), there was poor to excellent reliability. There was no time effect found between sessions for both FV and LV profiles. The squat jump FV and LV profiles established with a force plate are not reliable. Therefore, these profiles are not recommended to be used to inform programming decisions. [ABSTRACT FROM AUTHOR]

Purpose: This study compared the concurrent validity and reliability of previously proposed generalized group equations for estimating the bench press (BP) 1-repetition maximum (1RM) with the individualized load--velocity relationship modeled with a 2-point method. Methods: Thirty men (BP 1RM relative to body mass: 1.08 [0.18] kg⋅kg-1) performed 2 incremental loading tests in the concentric-only BP exercise and another 2 in the eccentric--concentric BP exercise to assess their actual 1RM and load--velocity relationships. A high velocity (≈1 m⋅s-1) and a low velocity (≈0.5 m⋅s-1) were selected from their load--velocity relationships to estimate the 1RM from generalized group equations and through an individual linear model obtained from the 2 velocities. Results: The directly measured 1RM was highly correlated with all predicted 1RMs (r = .847-.977). The generalized group equations systematically underestimated the actual 1RM when predicted from the concentric-only BP (P < .001; effect size = 0.15-0.94) but overestimated it when predicted from the eccentric--concentric BP (P < .001; effect size = 0.36--0.98). Conversely, a low systematic bias (range: -2.3 to 0.5 kg) and random errors (range: 3.0-3.8 kg), no heteroscedasticity of errors (r² = .053-.082), and trivial effect size (range: -0.17 to 0.04) were observed when the prediction was based on the 2-point method. Although all examined methods reported the 1RM with high reliability (coefficient of variation ≤ 5.1%; intraclass correlation coefficient ≥ .89), the direct method was the most reliable (coefficient of variation < 2.0%; intraclass correlation coefficient ≥ .98). Conclusions: The quick, fatigue-free, and practical 2-point method was able to predict the BP 1RM with high reliability and practically perfect validity, and therefore, the authors recommend its use over generalized group equations. [ABSTRACT FROM AUTHOR]

Copyright of Revista Iberoamericana de Psicología del Ejercicio y el Deporte is the property of Revista Iberoamericana de Psicología del Ejercicio y el Deporte and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Maximum- and reactive-strength qualities both have important roles in athletic movements and sporting performance. Very little research has investigated the relationship between maximum strength and reactive strength. The aim of this study was to investigate the relationship between maximum-strength (isometric midthigh-pull peak force [IMTP PF]) and reactive-strength (drop-jump reactive-strength index [DJ-RSI]) variables at 0.3-m, 0.4-m, 0.5-m, and 0.6-m box heights. A secondary aim was to investigate the between- and within-group differences in reactive-strength characteristics between relatively stronger athletes (n = 11) and weaker athletes (n = 11). Forty-five college athletes across various sports were recruited to participate in the study (age, 23.7 ± 4.0 y; mass, 87.5 ±16.1 kg; height, 1.80 ± 0.08 m). Pearson correlation results showed that there was a moderate association (r = .302-431) between maximum-strength variables (absolute, relative, and allometric scaled PF) and RSI at 0.3, 0.4, 0.5 and 0.6 m (P < .05). In addition, 2-tailed independent-samples t tests showed that the RSIs for relatively stronger athletes (49.59 ± 2.57 N/kg) were significantly larger than those of weaker athletes (33.06 ± 2.76 N/kg) at 0.4 m (Cohen d = 1.02), 3.5 m (d = 1.21 ), and 0.6 m (d = 1.39) (P < .05). Weaker athletes also demonstrated significant decrements in RSI as eccentric stretch loads increased at 0.3-m through 0.6-m box heights, whereas stronger athletes were able to maintain their reactive-strength ability. This research highlights that in specific sporting scenarios, when there are high eccentric stretch loads and fast stretch-shortening-cycle demands, athletes' reactive-strength ability may be dictated by their relative maximal strength, specifically eccentric strength. [ABSTRACT FROM AUTHOR]

Aube, D, Wadhi, T, Rauch, J, Anand, A, Barakat, C, Pearson, J, Bradshaw, J, Zazzo, S, Ugrinowitsch, C, and De Souza, EO. Progressive resistance training volume: effects on muscle thickness, mass, and strength adaptations in resistance-trained individuals. J Strength Cond Res 36(3): 600-607, 2022-This study investigated the effects of 12-SET, 18-SET, and 24-SET lower-body weekly sets on muscle strength and mass accretion. Thirty-five resistance-trained individuals (one repetition maximum [1RM] squat: body mass ratio [1RM: BM] = 2.09) were randomly divided into 12-SET: n = 13, 18-SET: n = 12, and 24-SET: n = 10. Subjects underwent an 8-week resistance-training (RT) program consisting of 2 weekly sessions. Muscle strength (1RM), repetitions to failure (RTF) at 70% of 1RM, anterior thigh muscle thickness (MT), at the medial MT (MMT) and distal MT (DMT) points, as well as the sum of both sites ([SIGMA]MT), along with region of interest for fat-free mass (ROI-FFM) were measured at baseline and post-testing. For the 1RM, there was a main time effect (p <= 0.0001). However, there was a strong trend toward significance (p = 0.052) for group-by-time interaction, suggesting that 18-SET increased 1RM back squat to a greater extent compared with 24-SET (24-SET: 9.5 kg, 5.4%; 18-SET: 25.5 kg, 16.2%; 12-SET: 18.3 kg, 11.3%). For RTF, only a main time-effect (p <= 0.0003) was observed (24-SET: 5.7 reps, 33.1%; 18-SET: 2.4 reps, 14.5%; 12-SET: 5.0 reps, 34.8%). For the MMT, DMT, [SIGMA]MT, and ROI-FFM, there was only main time-effect (p <= 0.0001) (MMT: 24-SET: 0.15 cm, 2.7%; 18-SET: 0.32 cm, 5.7%; 12-SET: 0.38 cm, 6.4%-DMT: 24-SET: 0.39 cm, 13.1%; 18-SET: 0.28 cm, 8.9%; 12-SET: 0.34 cm, 9.7%-[SIGMA]MT: 24-SET: 0.54 cm, 6.1%; 18-SET: 0.60 cm, 6.7%; 12-SET: 0.72 cm, 7.7%, and ROI-FFM: 24-SET: 0.70 kg, 2.6%; 18-SET: 1.09 kg, 4.2%; 12-SET: 1.20 kg, 4.6%, respectively). Although all of the groups increased maximum strength, our results suggest that the middle dose range may optimize the gains in back squat 1RM. Our findings also support that differences in weekly set number did not impact in MT and ROI-FFM adaptations in subjects who can squat more than twice their body mass. /=>/p> [ABSTRACT FROM AUTHOR]

Background: One-repetition maximum (1RM) tests are time-consuming, and they might not always be logistically possible or warranted due to increased risk of injury when performed incorrectly or by novice athletes. Repetitions-to-failure tests are a widespread method of predicting the 1RM, but its accuracy may be compromised by several factors such as the type of exercise, sex, training history, and the number of repetitions completed in the test. Hypothesis: The touch-and-go bench press would provide a higher 1RM than the concentric-only bench press for both genders regardless of whether the 1RM was obtained by the direct or repetitions-to-failure method and the error in the 1RM prediction would be positively correlated with the number of repetitions performed to failure and negatively correlated with the 1RM strength and resistance training experience. Study Design: Cross-sectional study. Level of Evidence: Level 3. Methods: A total of 113 adults (87 men and 26 women) were tested on 2 sessions during the concentric-only and touch-and-go bench press. Each session consisted of an incremental loading test until reaching the 1RM load, followed by a repetitions-to-failure test. Results: The 1RM was higher for the touch-and-go bench press using both the direct (men, 7.80%; women, 7.62%) and repetitions-to-failure method (men, 8.29%; women, 7.49%). A significant, although small, correlation was observed between the error in the estimation of the 1RM and the number of repetitions performed (r = 0.222; P < 0.01), 1RM strength (r = −0.169; P = 0.01), and resistance training experience (r = −0.136; P = 0.05). Conclusion: The repetitions-to-failure test is a valid method of predicting the 1RM during the concentric-only and touch-and-go bench press variants. However, the accuracy of the prediction could be compromised with weaker and less experienced individuals and if more than 10 repetitions are completed during the repetitions-to-failure test. Clinical Relevance: The repetitions-to-failure test does not require any sophisticated equipment and enables a widespread use in different training environments. [ABSTRACT FROM AUTHOR]

Copyright of Al.Qadisiya journal for the Sciences of Physical Education is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revista Brasileira de Prescrição e Fisiologia do Exercício is the property of Instituto Brasileiro de Pesquisa e Ensino em Fisiologia do Exercicio and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Sprinting represents a result-relevant task in many sports. The correlation of sprinting performance and one-repetition maximum (1RM) in a squat has been assumed as assured. Results of the correlation with 1RM of the plantar flexors are still pending. Assuming an increasing relevance of the reactive working capacity with increasing distance, a decrease of the influence of maximum strength of the calves is conceivable. We investigated the correlation of 1RM in a calf raise and sprint performance in consecutive sections up to 30 meters. The results showed medium to strong, very significant correlations (p < 0.01) for absolute (r = −0.483 to r = −0.720) and relative (r = −0.460 to −0.577) strength, whereas an increase of the correlation throughout the course is observed. The dynamic maximum strength of the calves is a basic prerequisite for short sprints and should be regarded as a performance reserve. [ABSTRACT FROM AUTHOR]

Various body positions have been used in the scientific literature when performing the isometric midthigh pull resulting in divergent results. We evaluated force production in the isometric midthigh pull in bent (125° knee and 125° hip angles) and upright (125° knee, 145° hip angle) positions in subjects with (>6 months) and without (<6 months) substantial experience using weightlifting derivatives. A mixed-design ANOVA was used to evaluate the effect of pull position and weightlifting experience on peak force, force at 50, 90, 200, and 250 ms. There were statistically significant main effects for weightlifting experience and pull position for all variables tested, and statistically significant interaction effects for peak force, allometrically scaled peak force, force at 200 ms, and force at 250 ms. Calculated effect sizes were small to large for all variables in subjects with weightlifting experience, and were small to moderate between positions for all variables in subjects without weightlifting experience. A central finding of the study is that the upright body position (125° knee and 145° hip) should be used given that forces generated are highest in that position. Actual joint angles during maximum effort pulling should be measured to ensure body position is close to the position intended. [ABSTRACT FROM AUTHOR]

Copyright of Manual Therapy, Posturology & Rehabilitation Journal is the property of Revista Terapia Manual and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

We investigated the effects of 3 weeks of detraining on muscle cross-sectional area ( CSA) and one-repetition maximum strength (1- RM) in young men who had previously participated in 6 weeks (3 days week−1) of bench press training [blood flow restricted low-intensity ( LI- BFR; n = 10, 20% 1- RM) or high-intensity ( HI; n = 7, 75% 1- RM)]. Bench press 1- RM and muscle CSA of triceps brachii ( TB) and pectoralis major ( PM) were evaluated before (pre) and after training period (post) as well as after detraining period (detraining). Bench press 1- RM was higher at both post and detraining than at pre for LI- BFR ( P<0·01) and the HI ( P<0·01). TB and PM muscle CSA were higher at both post and detraining than at pre for the HI group ( P<0·01), while the LI- BFR group only increased ( P<0·01) at post. Relative dynamic strength (1- RM divided by TB muscle CSA) was higher at both post and detraining than at pre for the HI group ( P<0·01), while the LI- BFR group only increased ( P<0·01) at detraining. In conclusion, increased muscle strength following 6 weeks of training with LI- BFR as well as HI was well preserved at 3 weeks of detraining. HI-induced muscle strength appears to be dependent upon both neural adaptations and muscle hypertrophy with training and detraining. On the other hand, LI- BFR-induced muscle strength appears to be related primarily to muscle hypertrophy with training and to neural adaptations with detraining. [ABSTRACT FROM AUTHOR]

The article presents a study on the use of regression models to determine factors that affect an athlete's ability in jumping, sprinting, and changing direction. Topics include biomechanical variables, maximum strength tests, and the measurement of rate of force development (RFD) values. Anthropometric data and athletic performance are also discussed.

The article reports on research which was conducted to investigate the validity and reliability of a back squat variation using a rigid supportive harness that does not require unrestricted glenohumeral mobility for quantifying 1 repetition maximum (1 RM). Researchers evaluated the harnessed back squat (HBS) with 13 young male subjects with resistance training experience. They found that the HBS exercise is a valid and reliable method for assessing 1 RM in young men with previous resistance training experience.

Copyright of Revista Brasileira de Prescrição e Fisiologia do Exercício is the property of Instituto Brasileiro de Pesquisa e Ensino em Fisiologia do Exercicio and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The article presents the results of a study which investigated the effect of whole-body vibration on muscle strength and performance in power lifters. An overview of related previous research is provided, detailing the potential enhancement of explosive strength from vibration training. Details of the experiment protocol are also presented, including interval electromyographic analysis of neuromuscular activity.

The article presents a study which investigated professional rugby players' characteristics of strength, power and antropometrics and to determine the different qualities of their playing capacity. Thirty-five professionals rugby union players were tested including their age, height and body mass. Results show that large effect sizes for the high group were found in caps played in backs and skinfolds in forwards. The findings can be considered as a guide for physical development of rugby union players.

This study examined the effects of a 12 weeks detraining period on muscle strength and mass in older adults who had previously participated in a 12 weeks resistance training programme of high [80% of one repetition maximum (1-RM)] or moderate (60% of 1-RM) intensity. Twenty older adults (60–74 years), separated into a high (HI; n = 10; age: 65 ± 5 years) and a moderate (MI; n = 10; age: 66 ± 4 years) intensity resistance training group, were measured in the 1-RM knee extension and flexion strength, and the midthigh cross sectional areas (CSAs) of quadriceps, hamstrings and total thigh before and after a 12 weeks training period as well as after a 12 weeks detraining period. Maximum knee extension and flexion strength and the CSAs of all muscles decreased significantly ( P<0·05) with detraining but remained higher ( P<0·05) than pretraining levels for both groups. The HI group had a greater decrement ( P<0·05) in maximum strength and the CSA of total thigh compared to the MI group but strength levels and the CSA following detraining were higher ( P<0·05) for the HI group. The above data suggest that after a short detraining period of 12 weeks, muscle strength and hypertrophy levels of older adults decrease but remain greater than pretraining irrespective of training intensity. Greater declines in muscle strength are observed following HI training but still muscular strength and muscle mass are retained at a higher level than with MI probably due to the higher gains achieved during the training period. [ABSTRACT FROM AUTHOR]

The aim of the study was to determine whether forearm muscle strength correlates with sport climbing performance. Three different movements of the forearm musculature in 25 recreational climbers (performance on sight (os) style mean F7a+, range 6b+ – 7c; red point (rp) style 7b+, range 7a – 8b+) were examined. A special isokinetic device was built to investigate eccentric and concentric isokinetic maximum strength of wrist (wr) flexion, proximal interphalangeal joint (pi) flexion of the middle- and ringfinger and a "rolling in a bar" movement involving both interphalangeal joints and the metacarpophalangeal joint (ro) of all fingers. There was no correlation between absolute maximum strength and climbing performance. Relative strength (strength/body weight) of all three exercises however correlated significantly with climbing difficulty of rp and os style, except pi flexion and os style. Correlation coefficient was highest between rp and concentric wr flexion. Among forearm musculature concentric wrist flexion was the best predictor for sport climbing performance. [ABSTRACT FROM AUTHOR]

The aim of the study was to examine the effects of a maximal resistance training following the principles of the most effective resistance training known from sport adapted to elderly people. Twenty-four subjects were randomly assigned into a training group (10 females and 4 males, age: 76.2 ± 3.2 years) that underwent a training program and a control group (6 females and 4 males, age: 76.6 ± 2.7 years) that did not participate in the training program. Before and after the training period, both groups were identically examined (blood and urine sample, spiroergometric testing, morphological measurements). The training group underwent a 12-week training program. Eight different exercises for the largest muscle groups of the largest joints were defined as one training circle. Training took place twice a week and commenced with two training circles per week (one circle per training session). After every four weeks, one training circle per week was added until four training circles per week were reached. Before, after every four weeks (changes in training amount) and after the training period, the maximum strength was measured. Data was analysed by the independent t-test and the analysis of variance, in case of significance, the dependent t-test and the Scheffé-test were used. In the resistance training group, the fat-free body mass was increased by approximately 2.9 ± 0.5 kg, with no significant difference between females and males. Ergometrical fitness was increased by approximately 15%, while the maximum oxygen uptake was increased by approximately 12%. Maximum strength was increased between 26% (bench pull) and 38% (leg press). Resistance training that consisted of two training sessions per week was found to be at least as efficient as resistance training that included three training sessions per week, provided that the number of sets performed were equal. Seventy-five-year-old females were found to have a significantly higher body fat content than males of the same age (37% versus 26%, respectively). However, the decrease in body fat mass due to resistance training was found to be equal in both females and males (-4 ± 0.8 kg). Furthermore, there was almost no difference in muscle strength between the sexes for this age group (for example: leg press: females 86 kg versus males 82 kg). [ABSTRACT FROM AUTHOR]

Background: Multiple sclerosis (MS) is the third most common cause of adult neurologic disabilities. The aim of this study was to determine the effect of 8 weeks of neuromuscular exercises on strength, proprioceptive receptors, and balance of women with MS. Methods: In this randomized controlled trial study, 20 female volunteers with relapsing-remitting MS were randomly assigned into the experimental group (n = 10) and control group (n = 10). Maximum muscular strength of knee extensor and flexor muscles, knee joint proprioceptive error (Biodex), and balance (Berg Balance Scale) was measured at baseline and after 8 weeks of neuromuscular exercise. The data were analyzed using paired t-test and independent t-test. Results: The results showed a significant improvement (P < 0.05) in the quadriceps strength, hamstring strength, proprioceptive receptor error, and the balance in the experimental group, but not in the control group. A significant difference was evident between the experimental and control groups in terms of strength, balance, and proprioceptive receptor error (P < 0.05). Conclusions: Neuromuscular exercise training is effective in improving balance, strength, and reducing the proprioceptive error in people with MS, and it could be recommended as modalities for these patients. [ABSTRACT FROM AUTHOR]