Search

Titin is the largest protein in humans, composed of more than one hundred immunoglobulin (Ig) domains, and plays a critical role in muscle's passive elasticity. Thus, the molecular design of this giant polyprotein is responsible for its mechanical function. Interestingly, most of these Ig domains are connected directly with very few interdomain residues/linker, which suggests such a design is necessary for its mechanical stability. To understand this design, we chose six representative Ig domains in titin and added nine glycine residues (9G) as an artificial interdomain linker between these Ig domains. We measured their mechanical stabilities using atomic force microscopy-based single-molecule force spectroscopy (AFM-SMFS) and compared them to the natural sequence. The AFM results showed that the linker affected the mechanical stability of Ig domains. The linker mostly reduces its mechanical stability to a moderate extent, but the opposite situation can happen. Thus, this effect is very complex and may depend on each particular domain's property.

Biopolymers, such as polynucleotides, polypeptides and polysaccharides, are macromolecules that direct most of the functions in living beings. Studying the mechanical unfolding of biopolymers provides important information about their molecular elasticity and mechanical stability, as well as their energy landscape, which is especially important in proteins, since their three-dimensional structure is essential for their correct activity. In this primer, we present how to study the mechanical properties of proteins with atomic force microscopy and how to obtain information about their stability and energetic landscape. In particular, we discuss the preparation of polyprotein constructs suitable for AFM single molecule force spectroscopy (SMFS), describe the parameters used in our force-extension SMFS experiments and the models and equations employed in the analysis of the data. As a practical example, we show the effect of the temperature on the unfolding force, the distance to the transition state, the unfolding rate at zero force, the height of the transition state barrier, and the spring constant of the protein for a construct containing nine repeats of the I27 domain from the muscle protein titin. HIGHLIGHTS: 1. Atomic force microscopy (AFM) can be used to study the mechanical unfolding of polymers. 2. AFM provides a direct measurement of unfolding (unbinding) forces. 3. Force measurements for different rates provide information about the distance to the transition state and the unfolding rate at zero force., (© 2022 The Authors. Microscopy Research and Technique published by Wiley Periodicals LLC.)

Striated muscle responds to mechanical overload by rapidly up-regulating the expression of the cardiac ankyrin repeat protein, CARP, which then targets the sarcomere by binding to titin N2A in the I-band region. To date, the role of this interaction in the stress response of muscle remains poorly understood. Here, we characterise the molecular structure of the CARP-receptor site in titin (UN2A) and its binding of CARP. We find that titin UN2A contains a central three-helix bundle fold (ca 45 residues in length) that is joined to N- and C-terminal flanking immunoglobulin domains by long, flexible linkers with partial helical content. CARP binds titin by engaging an α-hairpin in the three-helix fold of UN2A, the C-terminal linker sequence, and the BC loop in Ig81, which jointly form a broad binding interface. Mutagenesis showed that the CARP/N2A association withstands sequence variations in titin N2A and we use this information to evaluate 85 human single nucleotide variants. In addition, actin co-sedimentation, co-transfection in C2C12 cells, proteomics on heart lysates, and the mechanical response of CARP-soaked myofibrils imply that CARP induces the cross-linking of titin and actin myofilaments, thereby increasing myofibril stiffness. We conclude that CARP acts as a regulator of force output in the sarcomere that preserves muscle mechanical performance upon overload stress., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2021. Published by Elsevier Ltd. All rights reserved.)

Limb-girdle muscular dystrophy type 2A (LGMD2A or LGMDR1) is a neuromuscular disorder caused by mutations in the calpain 3 gene ( CAPN3 ). Previous experiments using adeno-associated viral (AAV) vector-mediated calpain 3 gene transfer in mice indicated cardiac toxicity associated with the ectopic expression of the calpain 3 transgene. Here, we performed a preliminary dose study in a severe double-knockout mouse model deficient in calpain 3 and dysferlin. We evaluated safety and biodistribution of AAV9-desmin-hCAPN3 vector administration to nonhuman primates (NHPs) with a dose of 3 × 10 13 viral genomes/kg. Vector administration did not lead to observable adverse effects or to detectable toxicity in NHP. Of note, the transgene expression did not produce any abnormal changes in cardiac morphology or function of injected animals while reaching therapeutic expression in skeletal muscle. Additional investigation on the underlying causes of cardiac toxicity observed after gene transfer in mice and the role of titin in this phenomenon suggest species-specific titin splicing. Mice have a reduced capacity for buffering calpain 3 activity compared to NHPs and humans. Our studies highlight a complex interplay between calpain 3 and titin binding sites and demonstrate an effective and safe profile for systemic calpain 3 vector delivery in NHP, providing critical support for the clinical potential of calpain 3 gene therapy in humans., (Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

The nanomechanics of sarcomeric proteins is a key contributor to the mechanical output of muscle. Among them, titin emerges as a main target for the regulation of the stiffness of striated muscle. In the last years, single-molecule experiments by Atomic Force Microscopy (AFM) have demonstrated that redox posttranslational modifications are strong modulators of the mechanical function of titin. Here, we provide an overview of the recent development of the redox mechanobiology of titin, and suggest avenues of research to better understand how the stiffness of molecules, cells and tissues are modulated by redox signaling in health and disease., (Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.)

Introduction: The giant muscular proteins titin and obscurin bind to each other at the Zdisk during muscle development. This binding event is mediated through two domains from each protein: ZIg9/10 from titin and Ig58/59 from obscurin. This interaction helps stabilize and organize the sarcomere; ablation of this binding leads to muscular dystrophy., Objective: Here we solve the high-resolution solution structure of titin ZIg10 and further delineate which sections of titin bind to obscurin., Materials and Methods: Solution NMR, Circular Dichroism, and SEC-MALS were used to biophysically characterize the titin domains involved in this titin-obscurin interaction., Results and Conclusion: We present the high-resolution solution structure of titin ZIg10. Additionally, we show that titin ZIg9 drives the titin-obscurin interaction, while ZIg10 does not actively participate in the titin-obscurin interaction but instead acts to stabilize ZIg9., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

In this review we discuss the history and the current state of ideas related to the mechanism of size regulation of the thick (myosin) and thin (actin) filaments in vertebrate striated muscles. Various hypotheses have been considered during of more than half century of research, recently mostly involving titin and nebulin acting as templates or 'molecular rulers', terminating exact assembly. These two giant, single-polypeptide, filamentous proteins are bound in situ along the thick and thin filaments, respectively, with an almost perfect match in the respective lengths and structural periodicities. However, evidence still questions the possibility that the proteins function as templates, or scaffolds, on which the thin and thick filaments could be assembled. In addition, the progress in muscle research during the last decades highlighted a number of other factors that could potentially be involved in the mechanism of length regulation: molecular chaperones that may guide folding and assembly of actin and myosin; capping proteins that can influence the rates of assembly-disassembly of the myofilaments; Ca 2+ transients that can activate or deactivate protein interactions, etc. The entire mechanism of sarcomere assembly appears complex and highly dynamic. This mechanism is also capable of producing filaments of about the correct size without titin and nebulin. What then is the role of these proteins? Evidence points to titin and nebulin stabilizing structures of the respective filaments. This stabilizing effect, based on linear proteins of a fixed size, implies that titin and nebulin are indeed molecular rulers of the filaments. Although the proteins may not function as templates in the assembly of the filaments, they measure and stabilize exactly the same size of the functionally important for the muscles segments in each of the respective filaments.

Titin and obscurin, two giant muscle proteins, bind to each other in an antiparallel Ig-Ig fashion at the M-band. This interaction must be able to withstand the mechanical strain that the M-band typically experiences and remain intact. The mechanical force on these domains is likely exerted along one of two axes: a longitudinal axis, resulting in a 'shearing' force, or a lateral axis, resulting in a 'peeling' force. Here we present molecular dynamics data suggesting that these forces result in distinct unraveling pathways of the titin/obscurin complex and that peeling the domains apart requires less work and force., (Copyright © 2015 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.)

Mutations in the extreme C-terminus of titin (TTN), situated in the sarcomeric M-band, cause tibial muscular dystrophy (TMD) and limb-girdle muscular dystrophy 2J (LGMD2J). The mutations ultimately cause a loss of C-terminal titin, including a binding site for the protease calpain 3 (CAPN3), and lead to a secondary CAPN3 deficiency in LGMD2J muscle. CAPN3 has been previously shown to bind C-terminal titin and to use it as a substrate in vitro. Interestingly, mutations in CAPN3 underlie limb-girdle muscular dystrophy 2A (LGMD2A). Here, we aimed to clarify the relationship of CAPN3 and M-band titin in normal and pathological muscle. In vitro analyses identified several CAPN3 cleavage sites in C-terminal titin that were defined by protein sequencing. Furthermore, cleavage products were detected in normal muscle extracts by western blotting and in situ by immunofluorescence microscopy. The TMD/LGMD2J mutation FINmaj proved to alter this processing in vitro, while binding of CAPN3 to mutant titin was preserved. Unexpectedly, the pathological loss of M-band titin due to TMD/LGMD2J mutations was found to be independent of CAPN3, whereas the involvement of ubiquitous calpains is likely. We conclude that proteolytic processing of C-terminal titin by CAPN3 may have an important role in normal muscle, and that this process is disrupted in LGMD2A and in TMD/LGMD2J due to CAPN3 deficiency and to the loss of C-terminal titin, respectively., (© The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

The titin-telethonin complex, essential for anchoring filaments in the Z-disk of the sarcomere, is composed of immunoglobulin domains. Surprisingly, atomic force microscopy experiments showed that it resists forces much higher than the typical immunoglobulin domain and that the force distribution is unusually broad. To investigate the origin of this behavior, we developed a multiscale simulation approach, combining minimalist and atomistic models (SOP-AT). By following the mechanical response of the complex on experimental timescales, we found that the mechanical stability of titin-telethonin is modulated primarily by the strength of contacts between telethonin and the two titin chains, and secondarily by the timescales of conformational excursions inside telethonin and the pulled titin domains. Importantly, the conformational transitions executed by telethonin in simulations support its proposed role in mechanosensing. Our SOP-AT computational approach thus provides a powerful tool for the exploration of the link between conformational diversity and the broadness of the mechanical response, which can be applied to other multidomain complexes., (Copyright © 2015 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Striated muscle tissues undergo adaptive remodelling in response to mechanical load. This process involves the myofilament titin and, specifically, its kinase domain (TK; titin kinase) that translates mechanical signals into regulatory pathways of gene expression in the myofibril. TK mechanosensing appears mediated by a C-terminal regulatory tail (CRD) that sterically inhibits its active site. Allegedly, stretch-induced unfolding of this tail during muscle function releases TK inhibition and leads to its catalytic activation. However, the cellular pathway of TK is poorly understood and substrates proposed to date remain controversial. TK's best-established substrate is Tcap, a small structural protein of the Z-disc believed to link TK to myofibrillogenesis. Here, we show that TK is a pseudokinase with undetectable levels of catalysis and, therefore, that Tcap is not its substrate. Inactivity is the result of two atypical residues in TK's active site, M34 and E147, that do not appear compatible with canonical kinase patterns. While not mediating stretch-dependent phospho-transfers, TK binds the E3 ubiquitin ligase MuRF1 that promotes sarcomeric ubiquitination in a stress-induced manner. Given previous evidence of MuRF2 interaction, we propose that the cellular role of TK is to act as a conformationally regulated scaffold that functionally couples the ubiquitin ligases MuRF1 and MuRF2, thereby coordinating muscle-specific ubiquitination pathways and myofibril trophicity. Finally, we suggest that an evolutionary dichotomy of kinases/pseudokinases has occurred in TK-like kinases, where invertebrate members are active enzymes but vertebrate counterparts perform their signalling function as pseudokinase scaffolds.

Fresh cadaveric human tissue is a valuable resource that is used to address important clinical questions. However, it is unknown how post-mortem time impacts skeletal muscle mechanical and biochemical properties. We simulated morgue conditions in rabbits and tested the passive mechanical properties of muscle bundles, and the degradation of myosin heavy chain, collagen, and titin at specific intervals up to 7 days post-mortem. While a great deal of inter-specimen variability was observed, it was independent of post-mortem time. Passive mechanics, myosin heavy chain, and collagen content were all unaffected while the titin protein degraded up to 80% over 7 days post-mortem. These data indicate that fresh cadaveric tissue may be used for passive mechanical testing and that certain biochemical properties are unchanged up to 7 days after death., (Published by Elsevier Ltd.)