Search

The human rotator cuff consists of four muscles, each with a complex, multipennate architecture. Despite the functional and clinical importance, the architecture of the human rotator cuff has yet to be clearly described in humans in vivo. The purpose of this study was to investigate the intramuscular, intermuscular, and interindividual variations in architecture and moment arms of the human rotator cuff. Muscle volumes, fascicle lengths, physiological cross‐sectional areas (PCSAs), pennation angles, and moment arms of all four rotator cuff muscles were measured from mDixon and diffusion tensor imaging (DTI) scans of the right shoulders of 20 young adults. In accordance with the most detailed dissections available to date, we found substantial intramuscular variation in fascicle length (coefficients of variation (CVs) ranged from 26% to 40%) and pennation angles (CVs ranged from 56% to 62%) in all rotator cuff muscles. We also found substantial intermuscular and interindividual variations in muscle volumes, but relatively consistent mean fascicle lengths, pennation angles, and moment arms (CVs for all ≤17%). Moreover, when expressed as a proportion of total rotator cuff muscle volume, the volumes of individual rotator cuff muscles were highly consistent between individuals and sexes (CVs ≤16%), suggesting that rotator cuff muscle volumes scale uniformly, at least in a younger population without musculoskeletal problems. Together, these data indicate limited interindividual and intermuscular variability in architecture, which may simplify scaling routines for musculoskeletal models. However, the substantial intramuscular variation in architecture questions the validity of previously reported mean architectural parameters to adequately describe rotator cuff function. [ABSTRACT FROM AUTHOR]

Detailed analysis of skeletal muscle architecture provides insights into skeletal muscle function. To date, measurements of the human subscapularis architecture have been limited to cadaveric measurements. In this study we demonstrate the feasibility of using anatomically constrained fibre tractography to reconstruct and quantify the 3D architecture of the human subscapularis muscle , and provide the first quantitative measurements of the architecture of the human subscapularis muscle in vivo. mDixon and diffusion tensor magnetic resonance images were obtained from the right shoulders of 20 healthy young adults. Anatomically constrained fibre tractography, in which fascicle reconstructions were forced to terminate on the internal aponeurosis of the subscapularis, was used to reconstruct muscle fibre architecture of the subscapularis muscles. Qualitatively, architectural reconstructions resembled the known subscapularis anatomy well, demonstrating face validity of the reconstructions. Muscle architectural parameters (means ± SDs) were: muscle volume 138 ± 42 cm3, fascicle length 63.6 ± 5.9 mm, physiological cross-sectional area (PCSA) 22 ± 6 cm2, and pennation angle 16 ± 2°. Architectural measurements of the subscapularis fell within the range reported in cadaver studies and were relatively insensitive to variations in fibre tractography parameters. The anatomically detailed whole-muscle reconstructions can be used to quantify the effects of joint surgery on muscle architecture and to advance computational models of the human shoulder. [ABSTRACT FROM AUTHOR]

Muscle performance is closely related to the structure and function of tendons and aponeuroses, the sheet‐like, intramuscular parts of tendons. The architecture of aponeuroses has been difficult to study with magnetic resonance imaging (MRI) because these thin, collagen‐rich connective tissues have very short transverse relaxation (T2) times and therefore provide a weak signal with conventional MRI sequences. Here, we validated measurements of aponeurosis dimensions from two MRI sequences commonly used in muscle‐tendon research (mDixon and T1‐weighted images), and an ultrashort echo time (UTE) sequence designed for imaging tissues with short T2 times. MRI‐based measurements of aponeurosis width, length, and area of 20 sheep leg muscles were compared to direct measurements made with three‐dimensional (3D) quantitative microdissection. The errors in measurement of aponeurosis width relative to the mean width were 1.8% for UTE, 3.7% for T1, and 18.8% for mDixon. For aponeurosis length, the errors were 7.6% for UTE, 1.9% for T1, and 21.0% for mDixon. Measurements from T1 and UTE scans were unbiased, but mDixon scans systematically underestimated widths, lengths, and areas of the aponeuroses. Using the same methods, we then found high inter‐rater reliability (intraclass correlation coefficients >0.92 for all measures) of measurements of the dimensions of the central aponeurosis of the human tibialis anterior muscle from T1‐weighted scans. We conclude that valid and reliable measurements of aponeurosis dimensions can be obtained from UTE and from T1‐weighted scans. When the goal is to study the macroscopic architecture of aponeuroses, UTE does not hold an advantage over T1‐weighted imaging. [ABSTRACT FROM AUTHOR]

Background. Most data on the architecture of the human soleus muscle have been obtained from cadaveric dissection or two-dimensional ultrasound imaging. We present the first comprehensive, quantitative study on the three-dimensional anatomy of the human soleus muscle in vivo using diffusion tensor imaging (DTI) techniques. Methods. We report three-dimensional fascicle lengths, pennation angles, fascicle curvatures, physiological cross-sectional areas and volumes in four compartments of the soleus at ankle joint angles of 69±12° (plantarflexion, short muscle length; average ± SD across subjects) and 108 ± 7° (dorsiflexion, long muscle length) of six healthy young adults. Microdissection and three-dimensional digitisation on two cadaveric muscles corroborated the compartmentalised structure of the soleus, and confirmed the validity of DTI-based muscle fascicle reconstructions. Results. The posterior compartments of the soleus comprised 80 ± 5% of the total muscle volume (356 ± 58 cm³). At the short muscle length, the average fascicle length, pennation angle and curvature was 37 ± 8 mm, 31 ± 3° and 17 ± 4 /m, respectively. We did not find differences in fascicle lengths between compartments. However, pennation angles were on average 12° larger (p<0:01) in the posterior compartments than in the anterior compartments. For every centimetre that the muscle-tendon unit lengthened, fascicle lengths increased by 3.7 ± 0.8 mm, pennation angles decreased by -3.2 ± 0.9° and curvatures decreased by -2.7 ± 0.8 /m. Fascicles in the posterior compartments rotated almost twice as much as in the anterior compartments during passive lengthening. Discussion. The homogeneity in fascicle lengths and inhomogeneity in pennation angles of the soleus may indicate a functionally different role for the anterior and posterior compartments. The data and techniques presented here demonstrate how DTI can be used to obtain detailed, quantitative measurements of the anatomy of complex skeletal muscles in living humans. [ABSTRACT FROM AUTHOR]

There are few comprehensive investigations of the changes in muscle architecture that accompany muscle contraction or change in muscle length in vivo. For this study, we measured changes in the threedimensional architecture of the human medial gastrocnemius at the whole muscle level, the fascicle level and the fiber level using anatomical MRI and diffusion tensor imaging (DTI). Data were obtained from eight subjects under relaxed conditions at three muscle lengths. At the whole muscle level, a 5.1% increase in muscle belly length resulted in a reduction in both muscle width (mean change -2.5%) and depth (-4.8%). At the fascicle level, muscle architecture measurements obtained at 3,000 locations per muscle showed that for every millimeter increase in muscle-tendon length above the slack length, average fascicle length increased by 0.46 mm, pennation angle decreased by 0.27° (0.17° in the superficial part and 0.37° in the deep part), and fascicle curvature decreased by 0.18 m-1. There was no evidence of systematic variation in architecture along the muscle's long axis at any muscle length. At the fiber level, analysis of the diffusion signal showed that passive lengthening of the muscle increased diffusion along fibers and decreased diffusion across fibers. Using these measurements across scales, we show that the complex shape changes that muscle fibers, whole muscles, and aponeuroses of the medial gastrocnemius undergo in vivo cannot be captured by simple geometrical models. This justifies the need for more complex models that link microstructural changes in muscle fibers to macroscopic changes in architecture. [ABSTRACT FROM AUTHOR]

Ultrasound imaging is widely used to measure architectural features of human skeletal muscles in vivo. We systematically reviewed studies of the reliability and validity of two-dimensional ultrasound measurement of muscle fascicle lengths or pennation angles in human skeletal muscles. A comprehensive search was conducted in June 2011. Thirty-six reliability studies and six validity studies met the inclusion criteria. Data from these studies indicate that ultrasound measurements of muscle fascicle lengths are reliable across a broad range of experimental conditions [intraclass correlation coefficient (ICC) and r values were always > 0.6, and coefficient of variation values were always < 10%]. The reliability of measurements of pennation angles is broadly similar (ICC and r values were always > 0.5 and coefficient of variation values were always < 14%). Data on validity are less extensive and probably less robust, but suggest that measurement of fascicle lengths and pennation angles are accurate (ICC > 0.7) under certain conditions, such as when large limb muscles are imaged in a relaxed state and the limb or joint remains stationary. Future studies on validity should consider ways to test for the validity of two-dimensional ultrasound imaging in contracted or moving muscles and the best method of probe alignment. [ABSTRACT FROM AUTHOR]

People who have had a stroke often develop ankle contractures which may be caused by changes in architecture of calf muscles. Anatomically constrained diffusion tensor imaging has recently been used to make three-dimensional, whole-muscle measurements of muscle architecture. Here, we compared the architecture of the medial gastrocnemius muscle in the paretic and non-paretic sides of people who have had a hemiparetic stroke and control participants using novel imaging techniques. MRI techniques (diffusion tensor imaging and mDixon imaging) were used to obtain muscle volume, fascicle length, pennation angle, physiological cross-sectional area and curvature in 14 stroke patients (mean age 60 SD 13 years) and 18 control participants (mean age 66 SD 12 years). On average, the ankle on the paretic side had 11° (95% confidence interval 8 to 13°) less dorsiflexion range than on the non-paretic side, and 6° (1 to 13°) less dorsiflexion range than ankles of control participants. The medial gastrocnemius muscles on the paretic side were, on average, 15% (35.2 cm3, 95% confidence interval 5.2 to 65.2 cm3) smaller in volume than the muscles on the non-paretic side, and 16% (36.9 cm3, 95% confidence interval 3.1 to 70.6 cm3) smaller than in control participants. No statistically significant differences between paretic, non-paretic and control muscles were detected for fascicle length, pennation angle, physiological cross-sectional area or curvature. People with hemiparetic stroke and reduced range of motion have, on average, a smaller medial gastrocnemius muscle on the paretic side than on the non-paretic side. Other muscle architectural parameters appear unchanged. • Muscle architecture measurements were made using diffusion tensor imaging. • Muscles from stroke patients have smaller volumes. • Fascicle length and physiological cross-sectional area were not different. [ABSTRACT FROM AUTHOR]

Abstract For detailed analyses of muscle adaptation mechanisms during growth, ageing or disease, reliable measurements of muscle architecture are required. Diffusion tensor imaging (DTI) and DTI tractography have been used to reconstruct the architecture of human muscles in vivo. However, muscle architecture measurements reconstructed with conventional DTI techniques are often anatomically implausible because the reconstructed fascicles do not terminate on aponeuroses, as real muscle fascicles are known to do. In this study, we tested the reliability of an anatomically constrained DTI-based method for measuring three-dimensional muscle architecture. Anatomical magnetic resonance images and diffusion tensor images were obtained from the left legs of eight healthy participants on two occasions one week apart. Muscle volumes, fascicle lengths, pennation angles and fascicle curvatures were measured in the medial and lateral gastrocnemius, soleus and the tibialis anterior muscles. Averaged across muscles, the intraclass correlation coefficient was 0.99 for muscle volume, 0.81 for fascicle length, 0.73 for pennation angle and 0.76 for fascicle curvature. Measurements of muscle architecture obtained using conventional DTI tractography were highly sensitive to variations in the stopping criteria for DTI tractography. The application of anatomical constraints reduced this sensitivity significantly. This study demonstrates that anatomically constrained DTI tractography can provide reliable and robust three-dimensional measurements of whole-muscle architecture. The algorithms used to constrain tractography have been made publicly available. [ABSTRACT FROM AUTHOR]

The length and pennation of muscle fascicles are frequently measured using ultrasonography. Conventional ultrasonography imaging methods only provide two-dimensional images of muscles, but muscles have complex three-dimensional arrangements. The most accurate measurements will be obtained when the ultrasound transducer is oriented so that endpoints of a fascicle lie on the ultrasound image plane and the image plane is oriented perpendicular to the aponeurosis, but little is known about how to find this optimal transducer orientation in the frequently-studied medial gastrocnemius muscle. In the current study, we determined the optimal transducer orientation at 9 sites in the medial gastrocnemius muscle of 8 human subjects by calculating the angle of misalignment between three-dimensional muscle fascicles, reconstructed from diffusion tensor images, and the plane of a virtual ultrasound image. The misalignment angle was calculated for a range of tilts and rotations of the ultrasound transducer relative to a reference orientation that was perpendicular to the skin and parallel to the tibia. With the transducer in the reference orientation, the misalignment was substantial (mean across sites and subjects of 6.5°, range 1.4 to 20.2°). However for all sites and subjects a near-optimal alignment (on average 2.6°, range 0.5° to 6.0°) could be achieved by maintaining 0° tilt and applying a small rotation (typically less than 10°). On the basis of these data we recommend that ultrasonographic measurements of medial gastrocnemius muscle fascicle architecture be obtained, at least for relaxed muscles under static conditions, with the transducer oriented perpendicular to the skin and nearly parallel to the tibia. [ABSTRACT FROM AUTHOR]

In vivo measurements of muscle architecture provide insight into inter-individual differences in muscle function and could be used to personalise musculoskeletal models. When muscle architecture is measured from ultrasound images, as is frequently done, it is assumed that fascicles are oriented in the image plane and, for some measurements, that the image plane is perpendicular to the aponeurosis at the intersection of fascicle and aponeurosis. This study presents an in vivo validation of these assumptions by comparing ultrasound image plane orientation to three-dimensional reconstructions of muscle fascicles and aponeuroses obtained with diffusion tensor imaging (DTI) and high-resolution anatomical MRI scans. It was found that muscle fascicles were oriented on average at 5.5 + 4.1° to the ultrasound image plane. On average, ultrasound yielded similar measurements of fascicle lengths to DTI (difference < 3 mm), suggesting that the measurements were unbiased. The absolute difference in length between any pair of measurements made with ultrasound and DTI was substantial (10 mm or 20% of the mean), indicating that the measurements were imprecise. Pennation angles measured with ultrasound were significantly smaller than those measured with DTI (mean difference 6°). This difference was apparent only at the superficial insertion of the muscle fascicles so it was probably due to pressure on the skin applied by the ultrasound probes. It is concluded that ultrasound measurements of deep pennation angles and fascicle lengths in the medial gastrocnemius are unbiased but have a low precision and that superficial pennation angles are underestimated by approximately 10°. The l ow precision limits the use of ultrasound to personalise fascicle length in musculoskeletal models. [ABSTRACT FROM AUTHOR]