Search

An effective approach for improving dispersion states of multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) was employed via hybrid inclusion of the nanofillers in polyurethane matrix to further enhance viscoelastic properties. Nanocomposites based on MWCNTs, two groups of graphene and hybrid MWCNT/graphene with varied weight fractions and ratios were fabricated via a facile and scalable approach. Dynamic mechanical analysis results indicated an improvement of up to 86% in storage modulus at 25°C for hybrid MWCNT/GNP-S750 at only 0.25 wt% loading, whereas solely MWCNTs and graphene nanocomposites showed 9% and 15% enhancement at the same content, respectively. The glass transition temperature value was enhanced by about 9.5°C with 0.25 wt% inclusion of well-dispersed three-dimensional MWCNT/GNP-S750 structure, which disclosed a noticeable synergistic effect in thermomechanical properties. The reinforcement coefficient, adhesion factor, reinforcement efficiency factor, degree of entanglement and cross-link density of nanocomposites were also examined to evaluate the interaction of single and hybrid carbon nanofillers with PU matrix. [ABSTRACT FROM AUTHOR]

As an elastomer, poly(dimethylsiloxane) (PDMS) is used in various applications such as wearable technology and sealants, and is especially preferred in microelectromechanical device production due to its advantage in fabrication of microstructures. However, some of its applications such as sensor-based or electrode-based are limited due to its insulator aspect. Various conductive nanomaterials such as carbon nanotubes (CNTs), graphene, graphite, carbon black, and silver nanoparticles were incorporated into the PDMS matrix for the production of conductive nanocomposites. In this study, we produced highly conductive PDMS nanocomposites by addition of multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) in a three-dimensional network. Due to the synergistic effect between CNTs and GNPs inside a polymeric matrix, we expected to obtain PDMS nanocomposites more conductive than nanocomposites with only CNTs. Additionally, we investigated the effect of sulfuric acid treatment on the electrical conductivity and surface composition of prepared PDMS/MWCNT/GNP nanocomposites. Results indicated that the electrical conductivity in sulfuric acid-treated samples was significantly higher than in untreated samples. Levels of conductivity in the range of 270.7–1074.8 S/m were achieved; the higher ones were the samples treated with sulfuric acid solution. [ABSTRACT FROM AUTHOR]

Combining various carbon nanofillers with different dimensions can lead to a synergistic effect through the formation of an efficient conductive network. Hybrid polyurethane (PU) nanocomposites containing multi‐walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were fabricated to study experimental and theoretical aspects of thermal conductivity (TC) enhancement. The optimization of hybrid nanofillers combinations was done to synergically enhance the TC using various types of graphene, nanofillers concentrations and ratios. A synergistic thermal conductivity improvement with MWCNTs and GNPs was confirmed at low nanofillers contents. The TC of hybrid nanocomposite at 0.25 wt% is approximately equivalent to the TC of individual nanofillers at 0.75 wt%. An analytical model for the effective thermal conductivity of single and hybrid nanocomposites was considered with variables of volume fraction, interfacial thermal resistance, straightness of the nanofillers and the percolation effect, in which the predictions of the modified models agreed with the experimental results. [ABSTRACT FROM AUTHOR]

Multifunctional polyurethane foams reinforced with multiwalled carbon nanotubes and silica nanoparticles enhanced specific properties. We studied the effects of nanoparticle addition into polyurethane on mechanical properties and thermal stability by means of tensile, Charpy impact, hardness tests, and thermogravimetric analysis. Nanoparticles added to polyurethane are multiwalled carbon nanotubes, two types of silica nanoparticles, and multiwalled carbon nanotube/spherical silica as hybrid filler. Hybrid polyurethane/spherical silica/multiwalled carbon nanotube nanocomposite with the constant overall content of 0.75 wt% showed higher tensile strength, hardness, and thermal stability than either of nanoparticles at this content, which approves a synergistic effect between multiwalled carbon nanotubes and silica nanoparticles. [ABSTRACT FROM AUTHOR]