Search

This paper presents a new design for a 1 × 4 optical power splitter using multimode interference (MMI) coupler in silicon nitride (Si3N4) strip waveguide structures. The main functionality of the proposed design is to use Si3N4 for dealing with the back reflection (BR) effect that usually happens in silicon (Si) MMI devices due to the self-imaging effect and the higher index contrast between Si and silicon dioxide (SiO2). The optimal device parameters were determined through numerical optimizations using the beam propagation method (BPM) and finite difference time domain (FDTD). Results demonstrate that the power splitter with a length of 34.6 μm can reach equal distribution power in each output port up to 24.3% of the total power across the O-band spectrum with 0.13 dB insertion loss and good tolerance MMI coupler parameters with a shift of ±250 nm. Additionally, the back reflection range over the O-band was found to be 40.25–42.44 dB. This demonstrates the effectiveness of the incorporation using Si3N4 MMI and adiabatic input and output tapers in mitigating unwanted BR to ensure that a good signal is received from the laser. This design showcases the significant potential for data-center networks, offering a promising solution for efficient signal distribution and facilitating high-performance and reliable optical signal routing within the O-band range. By leveraging the advantages of Si3N4 and the MMI coupler, this design opens possibilities for advanced optical network architectures and enables efficient transmission of optical signals in the O-band range. [ABSTRACT FROM AUTHOR]

This paper presents a new design for a 1 × 4 optical power splitter using multimode interference (MMI) coupler in silicon nitride (Si3N4) strip waveguide structures. The main functionality of the proposed design is to use Si3N4 for dealing with the back reflection (BR) effect that usually happens in silicon (Si) MMI devices due to the self-imaging effect and the higher index contrast between Si and silicon dioxide (SiO2). The optimal device parameters were determined through numerical optimizations using the beam propagation method (BPM) and finite difference time domain (FDTD). Results demonstrate that the power splitter with a length of 34.6 μm can reach equal distribution power in each output port up to 24.3% of the total power across the O-band spectrum with 0.13 dB insertion loss and good tolerance MMI coupler parameters with a shift of ±250 nm. Additionally, the back reflection range over the O-band was found to be 40.25–42.44 dB. This demonstrates the effectiveness of the incorporation using Si3N4 MMI and adiabatic input and output tapers in mitigating unwanted BR to ensure that a good signal is received from the laser. This design showcases the significant potential for data-center networks, offering a promising solution for efficient signal distribution and facilitating high-performance and reliable optical signal routing within the O-band range. By leveraging the advantages of Si3N4 and the MMI coupler, this design opens possibilities for advanced optical network architectures and enables efficient transmission of optical signals in the O-band range.

A compact crossing for silicon-based slot and strip waveguides is proposed by utilizing a strip-multimode waveguide (SMW) crossing at the center and two logarithmically tapered slot-to-strip mode converters at the ports with slot waveguides. For input/output ports with slot waveguides, the guided modes are efficiently transformed through the mode converter and then enter into the SMW (without mode converters for those ports with strip waveguides), where the fields converge at the center of the intersection due to the self-imaging effect. Hence, the size of the input beam is much smaller than the width of the SMW at the crossing center, leading to significant reductions of the crosstalk and radiation loss. The numerical results show that a hybrid waveguide crossing operating at the wavelength of 1.55 µm with the insertion loss, crosstalk, and reflection of 0.14/0.164, -35.88/-38.79, and -35.35/-40.5 dB for input ports with slot/strip waveguides, respectively, is achieved. Moreover, the fabrication tolerances to the structural parameters are investigated by using a finite-difference time-domain method and evolution of the injected field along the propagation distance through the crossing structure is also demonstrated. [ABSTRACT FROM AUTHOR]