Search

Mucus reduces friction between epithelial surfaces by providing lubrication in the boundary and mixed regime. Mucins, the main macromolecule, are heavily glycosylated proteins that polymerise and retain water molecules, resulting in a hydrated biogel. It is assumed that positively charged ions can influence mucin film structure by screening the electrostatic repulsions between the negatively charged glycans on mucin moieties and draw in water molecules via hydration shells. The ionic concentration can vary significantly in different mucus systems and here we show that increasing the ionic concentration in mucin films leads to an increase in lubrication between two polydimethylsiloxane surfaces at sliding contact in a compliant oral mimic. Mucins were found to bind sodium ions in a concentration-dependent manner and increased ionic concentration appears to cause mucin films to swell when assessed by Quartz Crystal hiMicrobalance with Dissipation (QCM-D) analysis. Furthermore, we determined that the removal of negatively charged sialic acid moieties by sialidase digestion resulted in reduced adsorption to hydrophilic surfaces but did not affect the swelling of mucin films with increasing ionic concentrations. Moreover, the coefficient of friction was increased with sialic acid removal, but lubrication was still increased with increasing ionic concentrations. Taken together this suggests that sialic acids are important for lubrication and may exert this through the sacrificial layer mechanism. Ionic concentration appears to influence mucin films and their lubrication, and sialic acids, at least partly, may be important for ion binding., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Abby Weston reports financial support was provided by Medical Research Council. Abby Weston reports financial support was provided by Mars Wrigley Confectionery Ltd. Abby Weston reports a relationship with Medical Research Council that includes: funding grants and travel reimbursement. Abby Weston reports a relationship with Mars Wrigley Confectionery Ltd that includes: funding grants., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Hydrogels of cross-linked mucin glycoproteins (Muc-gel) have shown strong immune-modulating properties toward macrophages in vitro, which are translated in vivo by the dampening of the foreign body response to implantation in mice. Beyond mucin hydrogels, other biomaterials such as sensors, electrodes, and other long-term implants would also benefit from such immune-modulating properties. In this work, we aimed to transfer the bioactivity observed for three-dimensional Muc-gels to the surface of two model materials by immobilizing mucin into thin films (Muc-film) using covalent layer-by-layer assembly. We tested how the surface immobilization of mucins affects macrophage responses compared to Muc-gels. We showed that Muc-films on soft polyacrylamide gels mimic Muc-gel in their modulation of macrophage responses with activated gene expression of inflammatory cytokines on day 1 and then dampening them on day 3. Also, the markers of polarized macrophages, M1 and M2, were expressed at the same level for macrophages on Muc-film-coated soft polyacrylamide gels and Muc-gel. In contrast, Muc-film-coated hard polystyrene led to a different macrophage response compared to Muc-gel, having no activated expression of inflammatory cytokines and a different M1 marker expression. This suggested that the substrate mechanical properties and mucin molecular configuration determined by substrate-mucin interactions affect mucin immune-modulating properties. We conclude that mucin immune-modulating properties can be transferred to materials by mucin surface immobilization but will be dependent on the substrate chemical and mechanical properties.

Commercial mucin glycoproteins are routinely used as a model to investigate the broad range of important functions mucins fulfill in our bodies, including lubrication, protection against hostile germs, and the accommodation of a healthy microbiome. Moreover, purified mucins are increasingly selected as building blocks for multifunctional materials, i.e., as components of hydrogels or coatings. By performing a detailed side-by-side comparison of commercially available and lab-purified variants of porcine gastric mucins, we decipher key molecular motifs that are crucial for mucin functionality. As two main structural features, we identify the hydrophobic termini and the hydrophilic glycosylation pattern of the mucin glycoprotein; moreover, we describe how alterations in those structural motifs affect the different properties of mucins-on both microscopic and macroscopic levels. This study provides a detailed understanding of how distinct functionalities of gastric mucins are established, and it highlights the need for high-quality mucins-for both basic research and the development of mucin-based medical products.

Mucins are multifunctional glycosylated proteins that are increasingly investigated as building blocks of novel biomaterials. An attractive feature is their ability to modulate the immune response, in part by engaging with sialic acid binding receptors on immune cells. Once assembled into hydrogels, bovine submaxillary mucins (Muc gels) were shown to modulate the recruitment and activation of immune cells and avoid fibrous encapsulation in vivo . However, nothing is known about the early immune response to Muc gels. This study characterizes the response of macrophages, important orchestrators of the material-mediated immune response, over the first 7 days in contact with Muc gels. The role of mucin-bound sialic acid sugar residues was investigated by first enzymatically cleaving the sugar and then assembling the mucin variants into covalently cross-linked hydrogels with rheological and surface nanomechanical properties similar to nonmodified Muc gels. Results with THP-1 and human primary peripheral blood monocytes derived macrophages showed that Muc gels transiently activate the expression of both pro-inflammatory and anti-inflammatory cytokines and cell surface markers, for most makers with a maximum on the first day and loss of the effect after 7 days. The activation was sialic acid-dependent for a majority of the markers followed. The pattern of gene expression, protein expression, and functional measurements did not strictly correspond to M1 or M2 macrophage phenotypes. This study highlights the complex early events in macrophage activation in contact with mucin materials and the importance of sialic acid residues in such a response. The enzymatic glyco-modulation of Muc gels appears as a useful tool to help understand the biological functions of specific glycans on mucins which can further inform on their use in various biomedical applications.

In the human body, mucin glycoproteins efficiently reduce friction between tissues and thereby protect the mucosa from mechanical damage. Mucin lubricity is closely related to their molecular structure: it has been demonstrated previously that the hydrophobic termini of mucins critically contribute to their lubricity. If and how intrinsic sources of negative charge in mucins, e.g., sulfated glycans and sialic acid residues, are relevant for the tribological behavior of mucin solutions has, however, not been addressed yet. In this manuscript, we show that the removal of either sialic acid or sulfate groups, which comprise only a minor amount of the total molecular weight, from MUC5B drastically reduces its lubricity. For MUC5AC solutions, however, this effect only occurs once mucin-associated DNA is removed as well. We find that neither the hydration state nor the average conformation of mucins adsorbed onto hydrophilic or hydrophobic surfaces is affected by the removal of anionic sugars. Instead, our data suggests that a loss of anionic sugars mainly influences the dynamic adsorption process of mucins onto both hydrophilic and hydrophobic surfaces., Competing Interests: Declaration of Competing Interest There are no conflicts of interest to declare., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Mucins are high molar mass glycoproteins that assume an extended conformation and can assemble into mucus hydrogels that protect our mucosal epithelium. In nature, the challenging task of generating a mucus layer, several hundreds of micrometers in thickness, from micrometer-sized cells is elegantly solved by the condensation of mucins inside vesicles and their on-demand release from the cells where they suddenly expand to form the extracellular mucus hydrogel. We aimed to recreate and control the process of compaction for mucins, the first step toward a better understanding of the process and creating biomimetic in vivo delivery strategies of macromolecules. We found that by adding glycerol to the aqueous solvent, we could induce drastic condensation of purified mucin molecules, reducing their size by an order of magnitude down to tens of nanometers in diameter. The condensation effect of glycerol was fully reversible and could be further enhanced and partially stabilized by cationic cross-linkers such as calcium and polylysine. The change of structure of mucins from extended molecules to nano-sized particles in the presence of glycerol translated into macroscopic rheological changes, as illustrated by a dampened shear-thinning effect with increasing glycerol concentration. This work provides new insight into mucin condensation, which could lead to new delivery strategies mimicking cell release of macromolecules condensed in vesicles such as mucins and heparin.

Mucins are large glycoproteins that are ubiquitous in the animal kingdom. Mucins coat the surfaces of many cell types and can be secreted to form mucus gels that assume important physiological roles in many animals. Our growing understanding of the structure and function of mucin molecules and their functionalities has sparked interest in investigating the use of mucins as building blocks for innovative functional biomaterials. These pioneering studies have explored how new biomaterials can benefit from the barrier properties, hydration and lubrication properties, unique chemical diversity, and bioactivities of mucins. Owing to their multifunctionality, mucins have been used in a wide variety of applications, including as antifouling coatings, as selective filters, and artificial tears and saliva, as basis for cosmetics, as drug delivery materials, and as natural detergents. In this review, we summarize the current knowledge regarding key mucin properties and survey how they have been put to use. We offer a vision for how mucins could be used in the near future and what challenges await the field before biomaterials made of mucins and mucin-mimics can be translated into commercial products.

The mucus gel covers the wet epithelia that forms the inner lining of the body. It constitutes our first line of defense protecting the body from infections and other deleterious molecules. Failure of the mucus barrier can lead to the inflammation of the mucosa such as in inflammatory bowel diseases. Unfortunately, there are no effective strategies that reinforce the mucus barrier properties to recover or enhance its ability to protect the epithelium. Herein, we describe a mucus engineering approach that addresses this issue where we physically cross-link the mucus gel with low molar mass chitosan variants to reinforce its barrier functions. We tested the effect of these chitosans on mucus using in-lab purified porcine gastric mucins, which mimic the native properties of mucus, and on mucus-secreting HT29-MTX epithelial cell cultures. We found that the lowest molar mass chitosan variant (degree of polymerization of 8) diffuses deep into the mucus gels while physically cross-linking the mucin polymers, whereas the higher molar mass chitosan variants (degree of polymerization of 52 and 100) interact only superficially. The complexation resulted in a tighter mucin polymer mesh that slowed the diffusion of dextran polymers and of the cholera toxin B subunit protein through the mucus gels. These results uncover a new use for low molar mass mucoadhesive polymers such as chitosans as noncytotoxic mucosal barrier enhancers that could be valuable in the prevention and treatment of mucosal diseases.

The sustained delivery of both hydrophobic and hydrophilic drugs from hydrogels has remained a challenge requiring the design and scalable production of complex multifunctional synthetic polymers. Here, we demonstrate that mucin glycoproteins, the gel-forming constituents of native mucus, are suitable for assembly into robust hydrogels capable of facilitating the sustained release of hydrophobic and hydrophilic drugs. Covalently-crosslinked mucin hydrogels were generated via exposure of methacrylated mucin to ultraviolet light in the presence of a free radical photoinitiator. The hydrogels exhibited an elastic modulus similar to that of soft mammalian tissue and were sensitive to proteolytic degradation by pronase. Paclitaxel, a hydrophobic anti-cancer drug, and polymyxin B, a positively-charged hydrophilic antibacterial drug, were retained in the hydrogels and released linearly with time over seven days. After four weeks of drug release, the hydrogels continued to release sufficient amounts of active paclitaxel to reduce HeLa cell viability and sufficient amounts of active polymyxin B to prevent bacterial proliferation. Along with previously-established anti-inflammatory, anti-viral, and hydrocarbon-solubilizing properties of mucin, the results of this study establish mucin as a readily-available, chemically-versatile, naturally-biocompatible alternative to complex multifunctional synthetic polymers as building blocks in the design of biomaterials for sustained drug delivery., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Multilayer films consisting of bovine submaxillary mucin (BSM) and poly(allylamine hydrochloride) (PAH) were prepared on various substrates using layer-by-layer assembly. The effects of both the assembly pH and ionic strength on multilayer characteristics were investigated by assessing film thicknesses (10-80 nm), surface wetting characteristics, and cell repulsion. Also, the dynamic assembly behavior was monitored using quartz crystal microbalance with dissipation monitoring (QCM-D) to further understand the effect of assembly pH on film characteristics. Assembly studies revealed that substantial amounts of BSM adhere to the outermost surface only at low pH conditions. The resulting multilayer films assembled at low pH conditions were found to exhibit hydrophilic and cell repellent behavior. In addition, it was found that batch-to-batch variations of the biopolymer BSM could dramatically alter properties.

The layer-by-layer (LbL) assembly of thin films on surfaces has proven to be an extremely useful technology for uses ranging from optics to biomedical applications. Releasing these films from the substrate to generate so-called free-standing multilayer films opens a new set of applications. Current approaches to generating such materials are limited because they can be cytotoxic, difficult to scale up, or have undesirable side reactions on the material. In this work, a new sacrificial thin film system capable of chemically triggered dissolution at physiological pH of 7.4 is described. The film was created through LbL assembly of bovine submaxillary mucin (BSM) and the lectin jacalin (JAC) for a (BSM/JAC) multilayer system, which remains stable over a wide pH range (pH 3-9) and at high ionic strength (up to 5 M NaCl). This stability allows for subsequent LbL assembly of additional films in a variety of conditions, which could be released from the substrate by incubation in the presence of a competitive inhibitor sugar, melibiose, which selectively disassembles the (BSM/JAC) section of the film. This novel multilayer system was then applied to generate free-standing, 7 μm diameter, circular ultrathin films, which can be attached to a cell surface as a "backpack". A critical thickness of about 100 nm for the (BSM/JAC) film was required to release the backpacks from the glass substrate, after incubation in melibiose solution at 37 °C for 1 h. Upon their release, backpacks were subsequently attached to murine monocytes without cytotoxicity, thereby demonstrating the compatibility of this mucin-based release system with living cells.

The mucus barrier is selectively permeable to a wide variety of molecules, proteins, and cells, and establishes gradients of these particulates to influence the uptake of nutrients, the defense against pathogens, and the delivery of drugs. Despite its importance for health and disease, the criteria that govern transport through the mucus barrier are largely unknown. Studies with uniformly functionalized nanoparticles have provided critical information about the relevance of particle size and net charge for mucus transport. However, these particles lack the detailed spatial arrangements of charge found in natural mucus-interacting substrates, such as certain viruses, which may have important consequences for transport through the mucus barrier. Using a novel, to our knowledge, microfluidic design that enables us to measure real-time transport gradients inside a hydrogel of mucins, the gel-forming glycoprotein component of mucus, we show that two peptides with the same net charge, but different charge arrangements, exhibit fundamentally different transport behaviors. Specifically, we show that certain configurations of positive and negative charges result in enhanced uptake into a mucin barrier, a remarkable effect that is not observed with either charge alone. Moreover, we show that the ionic strength within the mucin barrier strongly influences transport specificity, and that this effect depends on the detailed spatial arrangement of charge. These findings suggest that spatial charge distribution is a critical parameter to modulate transport through mucin-based barriers, and have concrete implications for the prediction of mucosal passage, and the design of drug delivery vehicles with tunable transport properties., (Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Multilayer films of biopolymers are attractive tools to exploit the extraordinary properties of certain biomacromolecules and introduce new functionalities to surfaces. Mucins, the gel-forming constituents of mucus, are versatile glycoproteins that have potential as new building blocks for biomaterial surface coatings. Multilayer films have mostly been assembled through the electrostatic pairing of polyelectrolytes, which results in limited pH and salt stability and screens charges otherwise available for useful payload binding. Here, we aim at assembling mucin multilayer films that differ from conventional paired polyelectrolyte assemblies to obtain highly stable and functional surface modifications. Using the lectin wheat germ agglutinin (WGA) to cross-link mucin-bound sugar residues, we show that (Mucin/WGA) films can grow into hydrated films and sustain exceptional resistance to extreme salt conditions and a large range of pH. Furthermore, we show that the addition of soluble N-acetyl-d-glucosamine can induce the controlled release of WGA from (Mucin/WGA) films. Last, we show that (Mucin/WGA) films can repeatedly incorporate and release a positively charged model cargo. The lubricating, hydration, barrier, and antimicrobial properties of mucins open multiple applicative perspectives for these highly stable mucin-based multilayer films.

Mucus is a self‐healing gel that lubricates the moist epithelium and provides protection against viruses by binding to viruses smaller than the gel's mesh size and removing them from the mucosal surface by active mucus turnover. As the primary nonaqueous components of mucus (≈0.2%–5%, wt/v), mucins are critical to this function because the dense arrangement of mucin glycans allows multivalence of binding. Following nature's example, bovine submaxillary mucins (BSMs) are assembled into "mucus‐like" gels (5%, wt/v) by dynamic covalent crosslinking reactions. The gels exhibit transient liquefaction under high shear strain and immediate self‐healing behavior. This study shows that these material properties are essential to provide lubricity. The gels efficiently reduce human immunodeficiency virus type 1 (HIV‐1) and genital herpes virus type 2 (HSV‐2) infectivity for various types of cells. In contrast, simple mucin solutions, which lack the structural makeup, inhibit HIV‐1 significantly less and do not inhibit HSV‐2. Mechanistically, the prophylaxis of HIV‐1 infection by BSM gels is found to be that the gels trap HIV‐1 by binding to the envelope glycoprotein gp120 and suppress cytokine production during viral exposure. Therefore, the authors believe the gels are promising for further development as personal lubricants that can limit viral transmission. [ABSTRACT FROM AUTHOR]

Hydrogels made of crosslinked macromolecules used in regenerative medicine technologies can be designed to affect the fate of surrounding cells and tissues in defined ways. Their function typically depends on the type and number of bioactive moieties such as receptor ligands present in the hydrogel. However, the detail in how such moieties are presented to cells can also be instrumental. In this work, how the crosslinking architecture of a hydrogel can affect its bioactivity is explored. It is shown that bovine submaxillary mucins, a highly glycosylated and immune‐modulating protein, exhibit strikingly different bioactivities whether they are crosslinked through their glycans or their protein domains. Both the susceptibility to enzymatic degradation and macrophage response are affected, while rheological properties and barrier to diffusion are mostly unaffected. The results suggest that crosslinking architecture affects the accessibility of the substrate to proteases and the pattern of sialic acid residues exposed to the macrophages. Thus, modulating the accessibility of binding sites through the choice of the crosslinking strategy appears as a useful parameter to tune the bioactivity of hydrogel‐based systems. [ABSTRACT FROM AUTHOR]

A key property of mucin glycoproteins is their exceptional capacity to hydrate and lubricate surfaces. In vivo, mucins assemble into mucus hydrogels that cover the epithelium and protect it from dehydration and shear stress. A better understanding of the origin of these properties could lead to new treatment strategies for patients with poor mucus coverage, defective mucus production, or glycosylation as caused by Sjögren syndrome, dry eye, or in the case of certain bacterial infections. In this work, mucin coatings are used to show that mucin-associated glycans are essential for the formation of such hydrated and lubricating layers. Native mucins are compared with deglycosylated mucins by analyzing their hydration and it is shown that their lubricative potential in the boundary and mixed lubrication regime is linked to the hydration. The removal of glycans from the mucin results in a 3.5-fold decrease in hydration and an increase in friction by two orders of magnitude. This loss of function is countered by grafting polyethylene glycol (PEG) molecules to defective mucins through lectin-glycan interactions. This lectin-PEG conjugation restores hydration and improves lubrication of the partially deglycosylated mucin coatings. Thus, local complementation of defective mucus layers could prove to be a useful new treatment strategy. [ABSTRACT FROM AUTHOR]

Microbial colonization of implanted medical devices in humans can lead to device failure and life-threatening infections. One strategy to prevent this unwanted colonization is to coat devices with polymers that reduce bacterial attachment. This study investigates how mucins, a class of biopolymers found in mucus, can be used as surface coatings to prevent attachment of selected respiratory pathogens to polystyrene surfaces. Our data show that coatings of porcine gastric mucins or bovine submaxillary mucins reduce surface attachment by Streptococcus pneumoniae and Staphylococcus aureus, but not Pseudomonas aeruginosa. To elucidate how mucin coatings repel S. pneumoniae and S. aureus, the molecular components of mucins are examined. Our data suggest that mucin-bound glycans are key structural contributors of mucin coatings and are necessary for the repulsive effects toward S. pneumoniae and S. aureus. [ABSTRACT FROM AUTHOR]

In the human body, high-molecular-weight glycoproteins called mucins play a key role in protecting epithelial surfaces against pathogenic attack, controlling the passage of molecules toward the tissue and enabling boundary lubrication with very low friction coefficients. However, neither the molecular mechanisms nor the chemical motifs of those biomacromolecules involved in these fundamental processes are fully understood. Thus, identifying the key features that render biomacromolecules such as mucins outstanding boundary lubricants could set the stage for creating versatile artificial superlubricants. We here demonstrate the importance of the hydrophobic terminal peptide domains of porcine gastric mucin (MUC5AC) and human salivary mucin (MUC5B) in the processes of adsorbing to and lubricating a hydrophobic PDMS surface. Tryptic digestion of those mucins results in removal of those terminal domains, which is accompanied by a loss of lubricity as well as surface adsorption. We show that this loss can in part be compensated by attaching hydrophobic phenyl groups to the glycosylated central part of the mucin macromolecule. Furthermore, we demonstrate that the simple biopolysaccharide dextran can be functionalized with hydrophobic groups which confers efficient surface adsorption and good lubricity on PDMS to the polysaccharide. [ABSTRACT FROM AUTHOR]