Search

Tuning the morphology through processing additives represents one of the most promising strategies to boost the performance of organic solar cells (OSCs). However, it remains unclear how oligothiophene‐based solid additives influence the molecular packing and performance of OSCs. Here, two additives namely 2T and 4T, are introduced into state‐of‐the‐art PM6:Y6‐based OSCs to understand how they influence the film formation process, nanoscale morphology, and the photovoltaic performance. It is found that the 2T additive can improve the molecular packing of both donor polymer and non‐fullerene acceptor, resulting in lower Urbach energy and reduced energy loss. Furthermore, the blend film with 2T treatment displays enhanced domain purity and a more favorable distribution of the acceptor and donor materials in the vertical direction, which can enhance charge extraction efficiency while simultaneously suppressing charge recombination. Consequently, OSCs processed with 2T additive realize a promising efficiency of 18.1% for PM6:Y6‐based devices. Furthermore, the general applicability of the additive is demonstrated, and an impressive efficiency of 18.6% for PM6:L8‐BO‐based OSCs is achieved. These findings highlight that the uncomplicated oligothiophenes have excellent potential in fine‐adjustment of the active layer morphology, which is crucial for the future development of OSCs. [ABSTRACT FROM AUTHOR]

In this paper, a strategy of asymmetric alkyl and alkoxy substitution is applied to state‐of‐the‐art Y‐series nonfullerene acceptors (NFAs), and it achieves great performance in organic solar cell (OSC) devices. Since alkoxy groups can have a significant influence on the material properties of NFAs, alkoxy substitution is applied to the Y6 molecule in a symmetric manner. The resulting molecule (named Y6‐2O), despite showing improved open‐circuit voltage (Voc), yields extremely poor performance due to low solubility and excessive aggregation properties, a change that is due to the conformational locking effect of alkoxy groups. In contrast, asymmetric alkyl and alkoxy substitution on Y6, yields a molecule named Y6‐1O that can maintain the positive effect of Voc improvement and obtain reasonably good solubility. The resulting molecule Y6‐1O enables highly efficient nonfullerene OSCs with 17.6% efficiency and the asymmetric side‐chain strategy has the potential to be applied to other NFA‐material systems to further improve their performance. [ABSTRACT FROM AUTHOR]

Understanding the correlation between polymer aggregation, miscibility, and device performance is important to establish a set of chemistry design rules for donor polymers with nonfullerene acceptors (NFAs). Employing a donor polymer with strong temperature‐dependent aggregation, namely PffBT4T‐2OD [poly[(5,6‐difluoro‐2,1,3‐benzothiadiazol‐4,7‐diyl)‐alt‐(3,3″′‐di(2‐octyldodecyl)‐2,2′;5′,2″;5″,2″′‐quaterthiophen‐5,5‐diyl)], also known as PCE‐11 as a base polymer, five copolymer derivatives having a different thiophene linker composition are blended with the common NFA O‐IDTBR to investigate their photovoltaic performance. While the donor polymers have similar optoelectronic properties, it is found that the device power conversion efficiency changes drastically from 1.8% to 8.7% as a function of thiophene content in the donor polymer. Results of structural characterization show that polymer aggregation and miscibility with O‐IDTBR are a strong function of the chemical composition, leading to different donor–acceptor blend morphology. Polymers having a strong tendency to aggregate are found to undergo fast aggregation prior to liquid–liquid phase separation and have a higher miscibility with NFA. These properties result in smaller mixed donor–acceptor domains, stronger PL quenching, and more efficient exciton dissociation in the resulting cells. This work indicates the importance of both polymer aggregation and donor–acceptor interaction on the formation of bulk heterojunctions in polymer:NFA blends. [ABSTRACT FROM AUTHOR]

Abstract: Despite the rapid development of nonfullerene acceptors (NFAs), the fundamental understanding on the relationship between NFA molecular architecture, morphology, and device performance is still lacking. Herein, poly[[4,8‐bis[5‐(2‐ethylhexyl)thiophene‐2‐yl]benzo[1,2‐b:4,5‐b0]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]‐thieno[3,4‐b]thiophenediyl]] (PTB7‐Th) is used as the donor polymer to compare an NFA with a 3D architecture (SF‐PDI4) to a well‐studied NFA with a linear acceptor–donor–acceptor (A–D–A) architecture (ITIC). The data suggest that the NFA ITIC with a linear molecular structure shows a better device performance due to an increase in short‐circuit current (  Jsc) and fill factor (FF) compared to the 3D SF‐PDI4. The charge generation dynamics measured by femtosecond transient absorption spectroscopy (TAS) reveals that the exciton dissociation process in the PTB7‐Th:ITIC films is highly efficient. In addition, the PTB7‐Th:ITIC blend shows a higher electron mobility and lower energetic disorder compared to the PTB7‐Th:SF‐PDI4 blend, leading to higher values of Jsc and FF. The compositional sensitive resonant soft X‐ray scattering (R‐SoXS) results indicate that ITIC molecules form more pure domains with reduced domain spacing, resulting in more efficient charge transport compared with the SF‐PDI4 blend. It is proposed that both the molecular structure and the corresponding morphology of ITIC play a vital role for the good solar cell device performance. [ABSTRACT FROM AUTHOR]