Search

Amino acids and glucose consumption, cell growth and monoclonal antibody (mAb) production in mammalian cell culture are key considerations during upstream process and particularly media optimization. Understanding the interrelations and the relevant cellular physiology will provide insight for setting strategy of robust and effective mAb production. The aim of this study was to further our understanding of nutrient consumption metabolism, since this could have significant impact on enhancing mAb titer, cell proliferation, designing feeding strategies, and development of feed media. The nutrient consumption pattern, mAb concentration, and cell growth were analyzed in three sets of cell cultures with media supplementation of glucose, methionine, threonine, tryptophan, and tyrosine. The amino acids metabolism and its impact on cell growth and mAb production during the batch and fed‐batch culture were closely analyzed. It was shown that the phenylalanine, tyrosine and tryptophan biosynthesis pathways were significantly altered under different culture conditions with different media. These changes were more apparent in the fed‐batch process in which higher mAb titer was observed due to the metabolic changes than mAb titer in the batch process. The pathway analysis approach was well utilized for evaluating the impact on the relevant pathways involved under different cell culture conditions to improve cell growth and mAb titer. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:793–805, 2018 [ABSTRACT FROM AUTHOR]

Linkage of upstream cell culture with downstream processing and purification is an aspect of Quality by Design crucial for efficient and consistent production of high quality biopharmaceutical proteins. In a previous Plackett-Burman screening study of parallel bioreactor cultures we evaluated main effects of 11 process variables, such as agitation, sparge rate, feeding regimens, dissolved oxygen set point, inoculation density, supplement addition, temperature, and pH shifts. In this follow-up study, we observed linkages between cell culture process parameters and downstream capture chromatography performance and subsequent antibody attributes. In depth analysis of the capture chromatography purification of harvested cell culture fluid yielded significant effects of upstream process parameters on host cell protein abundance and behavior. A variety of methods were used to characterize the antibody both after purification and buffer formulation. This analysis provided insight in to the significant impacts of upstream process parameters on aggregate formation, impurities, and protein structure. This report highlights the utility of linkage studies in identifying how changes in upstream parameters can impact downstream critical quality attributes. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:163-170, 2017 [ABSTRACT FROM AUTHOR]

Virus retentive filters are a key product safety measure for biopharmaceuticals. A simplistic perception is that they function solely based on a size-based particle removal mechanism of mechanical sieving and retention of particles based on their hydrodynamic size. Recent observations have revealed a more nuanced picture, indicating that changes in viral particle retention can result from process pressure and/or flow interruptions. In this study, a mechanistic investigation was performed to help identify a potential mechanism leading to the reported reduced particle retention in small virus filters. Permeate flow rate or permeate driving force were varied and analyzed for their impact on particle retention in three commercially available small virus retentive filters. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:959-970, 2016 [ABSTRACT FROM AUTHOR]

Fermentanomics is an emerging field of research and involves understanding the underlying controlled process variables and their effect on process yield and product quality. Although major advancements have occurred in process analytics over the past two decades, accurate real-time measurement of significant quality attributes for a biotech product during production culture is still not feasible. Researchers have used an amalgam of process models and analytical measurements for monitoring and process control during production. This article focuses on using multivariate data analysis as a tool for monitoring the internal bioreactor dynamics, the metabolic state of the cell, and interactions among them during culture. Quality attributes of the monoclonal antibody product that were monitored include glycosylation profile of the final product along with process attributes, such as viable cell density and level of antibody expression. These were related to process variables, raw materials components of the chemically defined hybridoma media, concentration of metabolites formed during the course of the culture, aeration-related parameters, and supplemented raw materials such as glucose, methionine, threonine, tryptophan, and tyrosine. This article demonstrates the utility of multivariate data analysis for correlating the product quality attributes (especially glycosylation) to process variables and raw materials (especially amino acid supplements in cell culture media). The proposed approach can be applied for process optimization to increase product expression, improve consistency of product quality, and target the desired quality attribute profile. [ABSTRACT FROM AUTHOR]

Anion exchange chromatography (AEX) operated under weak partitioning mode has been proven to be a powerful polishing step as well as a robust viral clearance step in Pfizer's monoclonal antibody (mAb) platform purification process. A multivariate design of experiment (DoE) study was conducted to understand the impact of operating parameters and feedstream impurity levels on viral clearance by weak partitioning mode AEX. Bacteriophage was used initially as a surrogate for neutral and acidic isoelectric point mammalian viruses (e.g., retrovirus and parvovirus). Five different mAbs were used in the evaluation of process parameters such as load challenge (both product and impurities), load pH, load conductivity, and contact time (bed height and flow-rate). The operating ranges obtained from phage clearance studies and Pfizer's historical data were used to define an appropriate operating range for a subsequent clearance study with model retrovirus and parvovirus. Both phage and virus clearance evaluations included feedstreams containing different levels of impurities such as high molecular mass species (HMMS), host cell proteins (HCPs), and host cell DNA. For all the conditions tested, over 5 log10 of clearance for both retrovirus and parvovirus was achieved. The results demonstrated that weak partitioning mode AEX chromatography is a robust step for viral clearance and has the potential to be included as part of the modular viral clearance approach. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:750-757, 2015 [ABSTRACT FROM AUTHOR]

The N-linked glycan profiles on recombinant monoclonal antibody therapeutics significantly affect antibody biological functions and are largely determined by host cell genotypes and culture conditions. A key step in bioprocess development for monoclonal antibodies (mAbs) involves optimization and control of N-glycan profiles. With pressure from pricing and biosimilars looming, more efficient and effective approaches are sought in the field of glycoengineering. Metabolic studies and mathematical modeling are two such approaches that optimize bioprocesses by better understanding and predicting glycosylation. In this review, we summarize a group of strategies currently used for glycan profile modulation and control. Metabolic analysis and mathematical modeling are then explored with an emphasis on how these two techniques can be utilized to advance glycoengineering. [ABSTRACT FROM AUTHOR]

The presence of aggregates in monoclonal antibody (mAb) drug product (DP) formulations can present product quality challenges. Here we show that use of High Performance Size Exclusion Chromatography (HP-SEC), in conjunction with high-throughput dynamic light scattering (HT-DLS) analyses of mAb DPs can be a useful strategy to determine monomer content and the presence of aggregates under simulated stress conditions. This analytical approach was used to evaluate four commercially available mAb DPs under different conditions i.e.; original formulations, diluted, and thermo-mechanical stressed condition. Due to particle size limitations of HP-SEC columns, resulting in particles accumulating in the column frits prior to reaching the detector for analysis, there is a possibility that large mAb aggregates may not be detected. Both HP-SEC and HT-DLS were able to detect and resolve the mAb monomer (~10–12 nm) of the DPs in their recommended storage conditions. However, the ability to detect large aggregates (>40 nm) by both analytical methods differed, and HT-DLS was able to detect aggregates between 60 nm and 1400 nm under stress conditions. Our data indicates that HP-SEC, in conjunction with HT-DLS, may be beneficial to detect both mAb DP monomer content and multiple aggregate species (1–1000 nm) in the submicron size range. [ABSTRACT FROM AUTHOR]

The objective of the study was to analyze the effect of controlled and uncontrolled freezing step of a lyophilization process on the extent of non-enzymatic glycation and aggregation of an IgG1 formulation at two concentrations (1 mg/ml and 20 mg/ml). The degree of glycation (%) was determined through boronate affinity chromatography and its effect on the formation of soluble aggregates and higher molecular weight species was studied using dynamic light scattering (DLS) and size exclusion chromatography with multi-angle light scattering (SEC-MALS). The effect of non-enzymatic glycation on the secondary structure of the formulations was also studied using circular dichroism (CD) spectroscopy and Fourier transform infrared (FT-IR) spectroscopy. Results indicated that controlled nucleation yielded higher residual moisture contents and significantly lower specific surface areas for the two monoclonal antibody concentrations compared with uncontrolled nucleation cycle ( p < 0.05). For the two concentrations, uncontrolled nucleation resulted in significantly higher levels of glycation compared with controlled nucleation samples ( p < 0.05). Further, it was observed that higher storage temperatures (25 °C/60% RH) versus 5 °C resulted in higher glycation. Even though SEC-MALS analyses of the low concentrated formulations did not reveal the formation of higher molecular weight species, DLS analyses at two storage conditions revealed increases in the hydrodynamic radii and polydispersity index of the reconstituted formulations, suggesting the onset of formation of smaller species in the formulations. CD spectroscopy did not reveal any differences in the secondary structure of the mAb for the two concentrations after lyophilization. In conclusion, the freezing step method impacted the extent of glycation in lyophilized samples and the hydrolyzed component of sucrose was critical for increasing glycation. Even though some level of glycation was observed in lyophilized samples, the native structure of the protein was not affected. Further, it was demonstrated that storage of both lyophilized cakes and reconstituted formulations at higher temperatures could increase the extent of glycation in monoclonal antibody formulations. [ABSTRACT FROM AUTHOR]

Consistent high-quality antibody yield is a key goal for cell culture bioprocessing. This endpoint is typically achieved in commercial settings through product and process engineering of bioreactor parameters during development. When the process is complex and not optimized, small changes in composition and control may yield a finished product of less desirable quality. Therefore, changes proposed to currently validated processes usually require justification and are reported to the US FDA for approval. Recently, design-of-experiments-based approaches have been explored to rapidly and efficiently achieve this goal of optimized yield with a better understanding of product and process variables that affect a product's critical quality attributes. Here, we present a laboratory-scale model culture where we apply a Plackett- Burman screening design to parallel cultures to study the main effects of 11 process variables. This exercise allowed us to determine the relative importance of these variables and identify the most important factors to be further optimized in order to control both desirable and undesirable glycan profiles. We found engineering changes relating to culture temperature and nonessential amino acid supplementation significantly impacted glycan profiles associated with fucosylation, β-galactosylation, and sialylation. All of these are important for monoclonal antibody product quality. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:1919-1928, 2015 [ABSTRACT FROM AUTHOR]

An efficient and potentially scalable technology was evaluated to control the ice nucleation step of the freezing process for a model monoclonal antibody formulation and the effect on process performance and quality attributes of the final lyophilized product was compared with the conventional shelf ramping method of freezing. Controlled ice nucleation resulted in uniform nucleation at temperatures between −2.3 and −3.2°C while uncontrolled nucleation resulted in random nucleation at temperatures between −10 and −16.4°C. The sublimation rate (dm/dt) during primary drying was higher in the controlled nucleation cycle (0.13g/h/vial) than in the uncontrolled nucleation cycle (0.11g/h/vial). This was due to the formation of larger ice crystals, leading to lower product resistance (R p) and 19% reduction in the primary drying for the controlled nucleation cycle. Controlled ice nucleation resulted in lyophilized cakes with more acceptable appearance, no visible collapse or shrinkage and decreased reconstitution times compared with uncontrolled nucleation. There were no observed differences in the particle size, concentration (A 280nm) and presence of aggregates (A 410nm) between the two nucleation cycles when the lyophilized cakes were reconstituted. These were confirmed by SEC and protein A-HPLC analyses which showed similar peak shapes and retention times between the two cycles. However, uncontrolled nucleation resulted in cakes with larger specific surface area (0.90m2/g) than controlled nucleation (0.46m2/g). SEM images of the lyophilized cakes from uncontrolled nucleation revealed a sponge-like morphology with smaller pores while cakes from controlled nucleation cycle revealed plate-like structures with more open and larger pores. While controlled nucleation resulted in a final product with a higher residual moisture content (2.1±0.08%) than uncontrolled nucleation (1.62±0.11%), this was resolved by increasing the secondary drying temperature. [ABSTRACT FROM AUTHOR]

Abstract: The purpose of this study was to use QbD approaches to evaluate the effect of several variables and their interactions on quality of a challenging model murine IgG3κ monoclonal antibody (mAb), and then to obtain an optimized formulation with predefined quality target product profile. This antibody was chosen because it has a propensity to precipitate and thus represents a challenge condition for formulation development. Preliminary experiments were conducted to rule out incompatible buffer systems for the mAb product quality. A fractional factorial experimental design was then applied to screen the effects of buffer type, pH and excipients such as sucrose, sodium chloride (NaCl), lactic acid and Polysorbate 20 on glass transition temperature (), monoclonal antibody concentration (A 280), presence of aggregation, unfolding transition temperature (T m) of the lyophilized product, and particle size of the reconstituted product. A Box–Behnken experimental design was subsequently applied to study the main, interaction, and quadratic effects of these variables on the responses. Pareto ranking analyses showed that the three most important factors affecting the selected responses for this particular antibody were pH, NaCl, and Polysorbate 20. The presence of curvature in the variables’ effects on responses indicated interactions. Based on the constraints set on the responses, a design space was identified for this mAb and confirmed with experiments at three different levels of the variables within the design space. The model indicated a combination of high pH (8) and NaCl (50mM) levels, and a low Polysorbate 20 (0.008mM) level at which an optimal formulation of the mAb could be achieved. Moisture contents and other analytical procedures such as size exclusion chromatography, protein A analysis and SDS-PAGE of the pre-lyophilized and final reconstituted lyophilized products indicated an intact protein structure with minimal aggregation after formulation and lyophilization. In conclusion, experimental design approach was effective in identifying optimal concentrations of excipients and pH for this challenging monoclonal antibody formulation. [Copyright &y& Elsevier]