Search

High-indium-content InxGa1-xAs/GaAs single/multi-quantum well (SQW/MQW) structures have been systematically investigated. By optimizing the molecular-beam epitaxy growth conditions, the critical thickness of the strained In0.475Ga0.525As/GaAs QWs is raised to 7 nm, which is much higher than the value given by the Matthews and Blakeslee model. The good crystalline quality of the strained InGaAs/GaAs MQWs is proved by x-ray rocking curves. Photoluminescence measurements show that an emission wavelength of 1.25 μm at room temperatures with narrower full width at half maximum less than 30 meV can be obtained. The strain relaxation mechanism is discussed using the Matthews–Blakeslee model. © 2004 American Institute of Physics. [ABSTRACT FROM AUTHOR]

Abstract: Long-wavelength high indium content In x Ga1− x As/GaAs single/multi quantum wells (QWs) structures have been successfully grown by molecular beam epitaxy. It is evidenced by X-ray measurements that the critical thickness of the well width of In x Ga1− x As/GaAs QWs with an indium content x of 47.5% can be raised up to 7nm without strain relation. 1.25μm photoluminescence (PL) emission is obtained from the QWs with narrower full-width at half-maximum (FWHM) less than 30meV. Our results are important basements which are useful for further fabricating GaAs-based long-wavelength devices. [Copyright &y& Elsevier]

Abstract: Molecular beam epitaxy (MBE) growth of (InyGa1− y As/GaAs1− x Sb x )/GaAs bilayer quantum well (BQW) structures has been investigated. It is evidenced by photoluminescence (PL) that a strong blue shift of the PL peak energy of 47meV with increasing PL excitation power from 0.63 to 20mW was observed, indicating type II band alignment of the BQW. The emission wavelength at room temperature from (InyGa1− y As/GaAs1− x Sb x )/GaAs BQW is longer (above 1.2μm) than that from InGaAs/GaAs and GaAsSb/GaAs SQW structures (1.1μm range), while the emission efficiency from the BQW structures is comparable to that of the SQW. Through optimizing growth conditions, we have obtained room temperature 1.31μm wavelength emission from the (InyGa1− y As/GaAs1− x Sb x )/GaAs BQW. Our results have proved experimentally that the GaAs-based bilayer (InyGa1− y As/GaAs1− x Sb x )/GaAs quantum well is a useful structure for the fabrication of near-infrared wavelength optoelectronic devices. [Copyright &y& Elsevier]