Search

The measurement of surface moisture on beaches is vital for studying aeolian sand transport mechanisms, but existing techniques are not adequate for monitoring the surface moisture dynamics over a substantial beach section. In this study, we investigated the suitability of a new remote sensing method to monitor the spatiotemporal variation in surface moisture on a sandy beach using a long-range static terrestrial laser scanner (TLS). The TLS was permanently deployed on top of a 42 m high building overlooking the study site at Ostend-Mariakerke, Belgium. Considering the effect of target surface roughness on the intensity and the laboratory's length limitation, a new intensity correction method is proposed which only uses the field point cloud data measured on a homogenous beach surface (without time-consuming indoor experiments). Based on the corrected intensity data, the relation of the beach surface moisture to the corrected intensity was modeled by an exponential model with a correlation-coefficient squared of 0.92. A moisture estimation model was developed which can directly derive the beach surface moisture from the original intensity data of the TLS with a standard error of 2.27%. The hourly surface moisture dynamics across two tidal cycles on the beach were investigated as a case study, in which the point clouds derived from corresponding unmanned aerial vehicle (UAV) imagery are utilized to improve the calculation accuracy of the incidence angles of TLS point clouds at long distances. Results reveal that, after the intensity correction, the long-range static TLS is an extremely suitable technique to monitor the surface moisture dynamics (daytime and nighttime) over a substantial beach section (hundreds of meters) at a high scanning frequency (minutes to hours). [ABSTRACT FROM AUTHOR]

Surface moisture plays a key role in limiting the aeolian transport on sandy beaches. However, the existing measurement techniques cannot adequately characterize the spatial and temporal distribution of the beach surface moisture. In this study, a mobile terrestrial LiDAR (MTL) is demonstrated as a promising method to detect the beach surface moisture using a phase-based Z&F/Leica HDS6100 laser scanner mounted on an all-terrain vehicle. Firstly, two sets of indoor calibration experiments were conducted so as to comprehensively investigate the effect of distance, incidence angle and sand moisture contents on the backscattered intensity by means of sand samples with an average grain diameter of 0.12 mm. A moisture estimation model was developed which eliminated the effects of the incidence angle and distance (it only relates to the target surface reflectance). The experimental results reveal both the distance and incidence angle influencing the backscattered intensity of the sand samples. The standard error of the moisture model amounts to 2.0% moisture, which is considerably lower than the results of the photographic method. Moreover, a field measurement was conducted using the MTL system on a sandy beach in Belgium. The accuracy and robustness of the beach surface moisture derived from the MTL data was evaluated. The results show that the MTL is a highly suitable technique to accurately and robustly measure the surface moisture variations on a sandy beach with an ultra-high spatial resolution (centimeter-level) in a short time span (12 × 200 m per minute). [ABSTRACT FROM AUTHOR]