Search

The construction sector is presently among the most resource-intensive industries, driving a substantial body of research dedicated to the development of more sustainable materials to address these demands. A particularly promising approach within the framework of the circular economy is the repurposing of waste as a principal raw material for the creation of new construction products. Within this context, the primary aim of this study is to engineer ceramic materials for brick production using 100% waste-derived inputs, specifically aggregate washing sludge and manganese mining by-products. To evaluate the potential of these sustainable ceramic materials, an extensive investigation was conducted, encompassing both physical and mechanical testing, as well as a thorough characterisation of the waste inputs. For this purpose, a series of ceramic specimens were fabricated with varying proportions of mining residues and aggregate washing sludge, adhering to the conventional protocols employed in the manufacture of ceramic bricks. The results demonstrate that these sustainable ceramics exhibit a linear shrinkage reduction of up to 5% compared to traditional clay-based ceramics. Furthermore, they show water absorption levels—whether via capillarity, cold water, or hot water absorption—that are up to twice those observed in conventional clay ceramics, while maintaining comparable density values. This increased absorption, however, correlates with a reduction in mechanical strength at higher concentrations of manganese waste, yet the material continues to meet the minimum strength requirements as specified by industry standards for such products. In conclusion, this research introduces a novel, sustainable ceramic material that not only reduces economic and environmental costs but also adheres to the required performance criteria for construction applications. [ABSTRACT FROM AUTHOR]

Soils contaminated by mining activities are a major environmental concern, and to avoid this type of environmental impact, carrying out high-cost processes is necessary. For this reason, a solution is proposed in this study in order to eliminate the soils contaminated by mining activities and, in turn, prevent the soil's contaminating elements from causing harm. All this is achieved by using contaminated soils as raw materials for the production of ceramics for bricks. For this purpose, the materials were initially characterized physically and chemically, and different ceramic test pieces were manufactured with different percentages of clay and contaminated soil, subsequently determining the physical properties and the leaching of toxic elements. In this way, it was possible to evaluate, via innovative data mining and fuzzy logic techniques, the influence of the contaminated soil's contribution on the properties of ceramics. Based on this, it was possible to affirm that the contaminated soil incorporation negatively affects the physical properties of ceramics as well as the leaching of polluting elements. The ceramic formed by contaminated soil and clay has a lower compressive strength, and it is associated with lower linear shrinkage and lower density, as well as higher porosity and cold-water absorption. However, the addition of different percentages of contaminated soil (up to 70%) to clay created a ceramic that complied with regulation restrictions. Therefore, it was possible to obtain a sustainable material that eliminates environmental problems at a lower cost and that fits within the new circular mining concept thanks to fuzzy logic techniques. [ABSTRACT FROM AUTHOR]

The ceramics industry dedicated to the manufacture of building materials is a very significant cause of environmental pollution, and various research projects are being carried out to reduce the associated environmental impact. One of the most important research lines is the generation and development of new materials, from waste, through more sustainable production processes. All of this is framed in circular mining. In this research study, geopolymers were developed with biomass bottom ashes and brick dust in order to replace the traditional ceramics used to construct bricks. For this, different families of test tubes were formed with different percentages of both residues, and their physical and mechanical properties were studied. In this way, the properties of geopolymers could be compared with traditional ceramics. In addition, in order to determine the cause–effect relationships between physical properties and compressive strength, data were processed using fuzzy logic and data mining techniques. The results showed the feasibility of geopolymers generation with biomass bottom ashes and brick dust with acceptable properties to replace conventional ceramics. In addition, the fuzzy logic analysis allowed for establishing clear and objective relationships between the physical properties and the compressive strength of the geopolymers, with the aim of developing the highest quality geopolymer. [ABSTRACT FROM AUTHOR]

Mining activities are essential for a population's development; however, they also produce negative effects such as the production of waste, an impact on flora and water pollution. On the other hand, construction is one of the sectors which is most demanding of raw materials, with one of the main such materials being water. For this reason, this research evaluates the feasibility of incorporating water contaminated by mining waste into ceramic materials for bricks. In this way, the use of water is reduced and, on the other hand, the contaminating elements of the mining water are encapsulated in the ceramic matrix. To achieve this, the clay used and the contaminated water were first analysed, then different families of samples were conformed with different percentages of contaminated water. These samples were tested to determine their physical and mechanical properties. At the same time, leachate tests were carried out to determine that the ceramic material created did not cause environmental problems. The test results showed that the physical and mechanical properties of the ceramics were not influenced by the addition of contaminated water. On the other hand, the leachate tests showed that encapsulation of most of the potentially toxic elements occurred. However, the use of contaminated water as mixing water for ceramics could only be performed up to 60%, as higher percentages would leach impermissible arsenic concentrations. Accordingly, a new way of reusing water contaminated by mining activities is developed in this study, taking advantage of resources, avoiding environmental pollution and creating economic and environmentally friendly end products. [ABSTRACT FROM AUTHOR]

The construction sector is one of the most demanding sectors of raw materials in existence today. As a consequence, the extraction of these materials has a significant impact on the environment. At the same time, mining activities produce a series of wastes, in some cases with polluting elements, which must be treated to avoid pollution. Therefore, the use of mining waste for the conformation of new construction materials is an important environmental advantage, even more so when such waste is prevented from producing polluting leachates. Therefore, in this research, geopolymers are developed with mine tailings from the Linares lead mines, chemically activated with potassium hydroxide. For this purpose, different percentages of the alkaline activator were tested and the physical and mechanical properties of the conformed materials were evaluated. The analysis of the different conformed geopolymers determined the optimum percentage of potassium hydroxide for conforming the geopolymer with the best mechanical and physical properties. In addition, the concentration in the leachate of potentially contaminating chemical elements in the mining waste was estimated to be lower than those regulated by the regulations. Consequently, this research shows the development of a sustainable material for construction with mining waste and reduction of the environmental impact of traditional products. [ABSTRACT FROM AUTHOR]

Steel is one of the most widely used materials in the past and today. Various techniques are used to recycle this material, including the electric arc furnace. This process has several advantages, but it also has a major disadvantage, namely, the generation of waste such as electric arc furnace dusts. Electric arc furnace dusts are classified as hazardous waste due to their high percentage of heavy metals, including zinc. Consequently, in the present research, the leaching of zinc for recovery with sulfuric acid solutions at ambient temperature and atmospheric pressure is evaluated, as well as the reuse of the leaching process residue as a raw material for ceramic materials. The sulfuric acid solutions were 0.125, 0.25, 0.5, and 1 molar, using clay for ceramic conforming and percentages of the leaching residue from 0–50%. The results showed that the optimum solution was 1 molar sulfuric acid, recovering all the zinc in the sample in 36 h. Furthermore, it was found that the clay-conformed ceramics with less than 40% leaching residue showed acceptable physical and mechanical properties according to standards. Therefore, this research develops a new environmental hydrometallurgy in which metallic elements of interest are valorized and the production of waste is avoided, reducing the deposition of hazardous waste in landfills and the extraction of raw materials for the manufacture of construction materials. [ABSTRACT FROM AUTHOR]

Road construction is an activity that involves a large consumption of raw materials, with the consequent high environmental impact. For this reason, various research projects are being developed in which waste is used as a raw material for bituminous mixtures. This avoids the extraction of raw materials, reduces the environmental impact and reduces greenhouse gas emissions. In this research, the incorporation of ladle furnace slag as a filler for continuous grading bituminous mixtures was evaluated. Firstly, the ladle furnace slag was chemically and physically characterised and its suitability for use as a filler was determined in accordance with the regulations. Subsequently, bituminous mixtures were conformed with the slag and also with commercial fillers, calcareous and hornfels, in order to compare the results. Finally, the physical properties, Marshall stability and the effect of water were determined with the immersion–compression test on all families of samples. The results showed that the mixes conformed with ladle furnace slag had higher Marshall stability, less variation due to the effect of water and acceptable physical properties. Consequently, the suitability of utilisation of these slags in bituminous mixtures could be confirmed. [ABSTRACT FROM AUTHOR]

The development of the population's well-being involves the use of different raw materials. However, metallic elements such as copper are currently scarce due to their intensive use in different sectors. Therefore, new sources of raw materials that provide these elements, are of lower cost, and use waste for their extraction must be sought. For this reason, in this research, different waste dumps of the mining district of Linares (Spain) are studied to evaluate the existence of recoverable copper by hydrometallurgical techniques. The material from the waste dump selected as potentially viable is leached with different sulfuric acid solutions (0.25, 0.5, 1, and 2 mol) and at different times, obtaining copper concentrations usable for subsequent hydrometallurgical processes. In addition, in order to develop an environmental hydrometallurgy, the leach waste is characterized, and bituminous mixtures are made with it. The results of the present investigation showed that it was possible to recover 80% of the copper in the waste dumps of the Linares mining district with 1 and 2 mol solutions of sulfuric acid. At the same time, the waste from the leaching process was found to be suitable for use as an aggregate in bituminous mixtures. Therefore, bituminous mixtures were conformed, and it was obtained that the optimum percentage of bituminous emulsion was 6.95% for the proposed granulometry. This emulsion percentage, which corresponds to a residual bitumen percentage of 4.17%, showed particle loss test results of 14% and 18% after immersion. In addition, the stability test values for the Marshall test with the above-mentioned bitumen emulsion percentage and leaching waste showed a stability of 8.99 KN. This fact demonstrates the quality of the bituminous mixture made with the leaching waste for use in bituminous mixtures. Consequently, it can be affirmed that in the present investigation, a significant percentage of copper has been extracted from the waste dumps of the mining district of Linares (Spain) and that the waste after processing can be used in bituminous mixtures, there being a closed cycle of materials in which no waste is produced. [ABSTRACT FROM AUTHOR]

The construction sector is one of the most demanding sectors for materials that exist today. Therefore, in order to avoid the extraction of new raw materials, it is necessary to use waste. This waste must present a series of physical and chemical characteristics that make it suitable for its employment. Therefore, in this investigation, ladle furnace slag is characterized for use as filler in bituminous mixtures. These slags are produced by the metallurgical industry in large quantities and represent a significant environmental problem. The slags were tested by analyzing their chemical composition and elementary physical properties. At the same time, and in order to evaluate the environmental viability, the environmental affections produced by the treatment of this material for its use as filler were calculated. These environmental results were compared with those obtained by processing of conventional filler. The detailed methodology reflected the chemical and physical feasibility of ladle furnace slags for use as filler, as well as the environmental advantage of processing this waste compared to commercial materials. In this way, the suitability of ladle furnace slags for bituminous mixtures and its feasibility for the creation of more sustainable pavements was assessed. [ABSTRACT FROM AUTHOR]

Road construction is an activity that demands a significant amount of aggregates for bituminous mixtures. In addition, these aggregates must be of a suitable quality for use, even more so on high traffic roads. In response to this problem, and in order to avoid the extraction of new raw materials, research is being carried out using industrial waste as a substitute for conventional aggregates. In this way, the extraction of raw materials is reduced and landfilling of waste is avoided. However, these wastes must have certain properties and environmental advantages over natural aggregates. Otherwise, the use of waste would not be environmentally beneficial but would be more damaging to the environment. For this reason, this research evaluates the viability of using electric arc furnace slag as aggregates for bituminous mixtures, the main objectives being the determination of the characteristics of the by-product, the particularities and the critical points to be taken into account for its subsequent use in mixtures. At the same time, the environmental advantages of treating this waste to obtain a usable aggregate are evaluated in comparison with the processing of a natural aggregate. The results showed that electric arc furnace slags have a suitable chemical composition and excellent physical and mechanical properties for use in bituminous mixtures, even on high traffic roads. At the same time, it was determined that their use produces a considerable reduction in environmental afflictions. Therefore, it could be affirmed that the use of electric arc furnace slags in bituminous mixtures is recommendable as a way to develop more sustainable materials for construction. [ABSTRACT FROM AUTHOR]

Mining activity produces a series of wastes that must be treated to avoid environmental pollution. In addition, some of these mining wastes still contain metallic elements that are interesting for their extraction with new less expensive techniques and that can work with low mineral grades, such as hydrometallurgy. This study evaluates the suitability of Copper recovery in mining wastes, coming from waste dump, with a high percentage of metal oxides and granite. This recovery is carried out through leaching in 0.05, 0.10, 0.15 and 0.20 molar Sulphuric Acid solutions, at ambient temperature and atmospheric pressure. The exposure of the waste to the solution was made for 96 h, taking measurements of the leaching and evaluating the increase in Copper concentration every 24 h. The results reflected a good Copper recovery rate with concentrations up to 1.9 g/L. The best results were obtained for the 0.20 molar Sulphuric Acid solutions, producing a stability in the Copper concentration after 72 h. Other elements in smaller proportion as the Zinc were also recovered. Therefore, a process of recovery of Copper was obtained with a robust, versatile and economic technique in mining residues that currently represent an environmental pollution. [ABSTRACT FROM AUTHOR]

The manufacture of bricks for building purposes consumes large quantities of virgin materials, such as clay. On the other hand, the ornamental stone processing industry produces a huge amount of stone cutting sludge in its process. Therefore, this study presents the development of ceramic materials for the manufacture of bricks with stone cutting sludges, more specifically from granite. For this purpose, the physical properties of the stone cutting sludge and the chemical composition were mainly analyzed. Subsequently, different groups of ceramic samples were conformed and sintered with various combinations of clay and of stone cutting sludges. The conformed samples were evaluated with different physical tests and with the compressive strength test. The addition of stone cutting sludges to the ceramics reflected the creation of a material with lower density and higher porosity. The compressive strength of the different groups reflected a maximum allowable percentage of stone cutting sludges incorporation of 70%. Therefore, ceramic materials were developed with stone cutting sludges, developing a sustainable, lighter material with acceptable mechanical and physical characteristics. Avoiding the deposition of a polluting waste in a landfill and at the same time avoiding the extraction of new virgin materials. [ABSTRACT FROM AUTHOR]

Mining activity is essential for the social welfare of the population. However, this activity produces a series of mining waste. These mining wastes, if not properly treated, can produce significant environmental pollution. This study develops the incorporation of tailings from washing plants in ceramic materials for bricks in order to retain the contaminating elements in the ceramic matrix. To this end, firstly, a physical and chemical characterisation of the mining waste is carried out and different groups of samples are conformed with clay and mining waste. These conformed samples with mining waste are evaluated through different physical and mechanical tests typical in the ceramic industry, studying the variation of properties by the incorporation of the waste. In turn, the leachates from the groups of conformed samples are analyzed, confirming the retention of the contaminating elements of the mining waste in the ceramic matrix. The results of these tests showed that ceramics can be made for bricks with up to 90% mining waste, obtaining physical and mechanical properties acceptable regarding the regulations and retaining the contaminating elements in the ceramic matrix, as confirmed by the leachate tests. [ABSTRACT FROM AUTHOR]