Search

A transparent TiO 2 -C@TiO 2 -C free-standing film has been synthesized by two-step hydrothermal method and subsequent thermal annealing. The chemical composition and morphological features of the TiO 2 -C@TiO 2 -C film are characterized using X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy and N 2 adsorption-desorption measurement. The results indicate that the flower-like micro/nanostructure TiO 2 -C particle layers are intimately inhered to porous TiO 2 -C fibers. The fibers in film are interconnected each other to form a three-dimensional reticulate microstructure, and exhibit intense visible light absorption and high adsorptivity of dye molecules. The interaction between TiO 2 and its surface carbon layer in TiO 2 -C particle promotes the generation of Ti- O -C bonds, which leads to effective charge transfer. Under visible-light irradiation, TiO 2 -C@TiO 2 -C film presents enhanced photocatalytic activity for degradation of methylene blue. This work may provide a new viewpoint for designing transparent photocatalytic film for promising applications in heterogeneous photocatalysis. [ABSTRACT FROM AUTHOR]

A nanofiber-based TiO 2 (B)/carbon nanofiber membrane has been synthesized by a facile and effective route that incorporates electrospinning approach with hydrothermal method. The prepared membrane shows high flexibility and hydrophilicity. After treatment with a low surface energy fluorosilane, the obtained superhydrophobic surface endows the membrane a high adhesive force due to the hybrid microstructure of TiO 2 (B) nanotubes and nanoplates on fibers. A water droplet on the surface of the membrane appears spherical in shape, which cannot roll off even when the membrane is bent and turned upside down. When a water droplet dropped from a certain height above the tilt membrane, the rolled water droplet can be stopped after a small displacement. In addition, a 12 μl water droplet can be quickly captured from a hydrophobic surface by curvature change of the superhydrophobic TiO 2 (B)/carbon nanofiber membrane. The membrane with excellent static and dynamic pinning performance to water may be expected to apply to biomedical and microfluidic devices. [ABSTRACT FROM AUTHOR]

Abstract: TiO2/carbon paper composite materials with a hierarchically porous structure were synthesized by employing a filter paper as the support material and carbon source. The resorcinol–formaldehyde–block copolymer nanocomposite formed by the self-assembly of phenolic resin and F127 under acidic condition was selected as modifier of the microstructure of carbon paper. Results show that the as-adjusted carbon paper preserved the nanostructure of a pure carbonized filter paper. An ordered mesostructure was also formed. This micromorphology resulted in the increased specific surface area, as well as micropore and mesopore volumes, compared with the pure carbonized filter paper. When mesoporous TiO2 was deposited on the carbon paper with ordered mesopore by the evaporation-induced self-assembly route, the TiO2/carbon paper composite materials displayed excellent adsorption property and enhanced photocatalytic activity of methylene blue. [Copyright &y& Elsevier]

Abstract: The porous ZrO2 ceramics with ultra-high porosity were produced by combining phase change, heat exchange and freeze drying process of ZrO2 slurries during decompression environment. The prepared slurry was first cooled to near the supercooling point, and then the supercooled slurry was placed on decompression system to induce foaming and solidification until the decompress-freezing process of the slurry completed. After drying and sintering of the green part, an as-prepared ceramic with porosity more than 93% was obtained. It was shown that the porous ceramic was typically composed of large spherical cells, interconnected by near circular windows. Although the mechanical properties in obtained ceramics are not enough to resist high stress, porous ceramics with a number of pores in cell walls and struts may be expected to be applied in high thermal insulation process. [Copyright &y& Elsevier]

Two hierarchically porous silica ceramics with unidirectionally aligned channel morphology have been in situ synthesized by using soluble starch monoliths with well-defined uniaxial macroporous structure as template. Both these ceramics faithfully inherit the structure of soluble starch templates and show a large BET surface as well as a microstructure of uniform worm-like nanopores and a lamellar phase. These materials may be suitable for use in various separation and reaction processes. [Copyright &y& Elsevier]

Abstract: Experiments have been performed to show that the mechanical properties of alumina porous ceramics may be improved by introducing glycerol into the raw slurries and then casting them under a constant cooling rate. The effects of glycerol on the freeze casting process and thereby on the microstructure and mechanical properties of porous ceramics obtained are investigated. It is shown that the addition of glycerol will increase both the slurry viscosity and sample sintered density. SEM images for microstructure of the final ceramics reveal that a good connection between ceramic lamellae has been promoted. This connection makes as-prepared porous ceramics obtain high mechanical properties. For the 30vol.% alumina slurry with glycerol, the axial and radial compression strengths reach to, respectively, 255.1MPa and 105.8MPa. [Copyright &y& Elsevier]