Search

Abstract: Sintering of the AlN powder synthesized by a combustion synthesis method, which was developed recently by the present authors, was studied by using a microwave sintering technique. A single mode microwave cavity was used and an insulation package with a simple configuration was developed. A high sintering temperature (1900°C or higher) and a stable and uniform heating were readily achieved. A temperature measurement technique using a thermocouple with extrapolation was established to obtain the sintering temperature. A percent theoretical density of 99.5% and a thermal conductivity of 186W/mK were obtained for a specimen which was sintered at 1900°C with a soaking time of 30min and 3wt.% of Y2O3 added. The effects of sintering aid (i.e., Y2O3) and sintering temperature on densification, microstructure and thermal conductivity of the sintered specimens were investigated. [Copyright &y& Elsevier]

Hydrogen peroxide (H 2 O 2 ) is an essential mediator for most of the oxidative biological reactions in enzyme-based biosensor systems, such as glucose oxidase, cholesterol oxidase, and alcohol oxidase. Synthesis of new catalysts to detect the concentration of H 2 O 2 more precisely is indispensable for enzyme-based electrochemical biosensors. In this study, boron-doped graphene nanosheets (BGNs) with 2.2 atomic percentage (at%) boron doping level and a hierarchical microstructure were synthesized by an atmospheric-pressure carbothermal reaction as a noble-metal free catalyst for sensing H 2 O 2 . The isolated boron atoms on the BGNs surface act as the electrocatalytic sites by transferring charges to neighbor carbon atoms, and the hierarchical microstructure provides multidimensional electron transport pathways for charge transfer and therefore enhances the electrocatalytic ability. BGNs possess a higher reduction current in the cyclic voltammetry (CV) measurement than that of pristine graphene nanosheets (GNs) over the detection range of 0.0 to 10.0 mM at −0.4 V ( vs. Ag/AgCl). The BGNs modified electrochemical sensor shows a linear range from 1.0 to 20.0 mM of H 2 O 2 with a sensitivity of 266.7 ± 3.8 μA mM −1 cm −2 and limit of detection (LOD) of 3.8 μM at a signal-to-noise (S/N) ratio of 3. The beneficial hierarchical microstructure and the synergetic effects arising from doping boron in GNs accomplish the better performance of the BGNs modified electrochemical sensor. [ABSTRACT FROM AUTHOR]