Search

A simple and accurate method for killer-cell immunoglobulin-like receptor (KIR) genotyping is developed using KIR gene-specific primer extension (GSPE) followed by bead array hybridization (GSPE method). After amplification of exons 4, 5, and 9, KIR GSPE and bead array hybridization were performed to verify the presence or absence of 16 KIR subfamilies. GSPE method was validated with natural killer/KIR reference panel I consisting of 48 cell types provided by 13th International Histocompatibility Working Group (IHWG) and genomic DNA from 17 peripheral blood cells, 8 cell lines, and 8 buccal cells. The results of reference panel from GSPE method were 100% concordant with the IHWG reference typing information. All genomic DNAs except reference panel were typed for KIR genes with sequence-specific primer methods and showed 100% identical typing results using this novel system. In addition, GSPE method can obtain results in 8 h from DNA with 10 ng genomic DNA in a 96-well-based assay format., (© 2011 John Wiley & Sons A/S.)

The purpose of this study was to prepare microspheres loaded with hydrophilic drug, bupivacaine HCl using poly(D,L-lactic-co-glycolic acid) (PLGA) and poly(L-lactic acid) (PLLA). Microspheres were prepared with varying the PLGA/PLLA ratio with two different levels of bupivacaine HCl (5 and 10%) using a supercritical anti-solvent (SAS) technique. Microspheres ranging from 4-10 microm in geometric mean diameter could be prepared, with high loading efficiency. Powder X-ray diffraction (PXRD) revealed that bupivacaine HCl retained its crystalline state within the polymer and was present as a dispersion within the polymer phase after SAS processing. The release of bupivacaine HCl from biodegradable polymer microspheres was rapid up to 4 h, thereafter bupivacaine HCl was continuously and slowly released for at least 7 days according to the PLGA/PLLA ratio and the molecular weight of PLLA.

Chitosan microspheres cross-linked with three different cross-linking agents viz, tripolyphosphate (TPP), formaldehyde (FA) and gluteraldehyde (GA) have been prepared by spray drying technique. The influence of these cross-linking agents on the properties of spray dried chitosan microspheres was extensively investigated. The particle size and encapsulation efficiencies of thus prepared chitosan microspheres ranged mainly between 4.1-4.7 microm and 95.12-99.17%, respectively. Surface morphology, % erosion, % water uptake and drug release properties of the spray dried chitosan microspheres was remarkably influenced by the type (chemical or ionic) and extent (1 or 2% w/w) of cross-linking agents. Spray dried chitosan microspheres cross-linked with TPP exhibited higher swelling capacity, % water uptake, % erosion and drug release rate at both the cross-linking extent (1 and 2% w/w) when compared to those cross-linked with FA and GA. The sphericity and surface smoothness of the spray dried chitosan microspheres was lost when the cross-linking extent was increased from 1 to 2% w/w. Release rate of the drug from spray dried chitosan microspheres decreased when the cross-linking extent was increased from 1 to 2% w/w. The physical state of the drug in chitosan-TPP, chitosan-FA and chitosan-GA matrices was confirmed by the X-ray diffraction (XRD) study and found that the drug remains in a crystalline state even after its encapsulation. Release of the drug from chitosan-TPP, chitosan-FA and chitosan-GA matrices followed Fick's law of diffusion.

Felodipine-loaded poly (epsilon-caprolactone) (PCL) microspheres were prepared by two methods, the conventional emulsion solvent evapouration method and the quenching method. The aim of this work was to investigate the effects of process parameters such as emulsion type, drug loading, molecular-weight of the polymer, types of emulsion stabilizer and dispersed phase solvents, as well as preparation methods. The results show that, when conventional emulsion solvent evapouration method was used, the o/w-method produced smaller mean size and higher encapsulation efficiency compared with the o/o-method. The encapsulation efficiencies increased with an increase in the molecular weight and a decrease in crystallinity of PCL. The size of microspheres varied with the type of emulsion stabilizer used, smaller microspheres with PVA and narrow size distribution with Pol 237. The water solubility of the dispersed phase solvent was one of the critical factors in controlling the encapsulation efficiency and microsphere mean size. When water-soluble solvents such as acetonitrile and ethyl formate were used, the encapsulation efficiencies decreased due to higher evapouration rate. When quenching methods were used, in contrast to the conventional emulsion solvent evapouration method, very narrowly size-distributed but bigger microspheres were obtained.

This paper describes vitamin C-encapsulated chitosan microspheres cross-linked with tripolyphosphate (TPP) using a new process prepared by spray drying intended for oral delivery of vitamin C. Thus, prepared microspheres were evaluated by loading efficiency, particles size analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), zeta potential and in vitro release studies. The microspheres so prepared had a good sphericity and shape but varied with the volume of cross-linking agent solution added. They were positively charged. The mean particle size ranged from 6.1-9.0 microm. The size, shape, encapsulation efficiency, zeta potential and release rate were influenced by the volume of cross-linking agent. With the increasing amount of cross-linking agent, both the particle size and release rate were increased. Encapsulation efficiency decreased from 45.05-58.30% with the increasing amount of TPP solution from 10-30 ml. FTIR spectroscopy study showed that the vitamin C was found to be stable after encapsulation. XRD studies revealed that vitamin C is dispersed at the molecular level in the TPP-chitosan matrix. Well-defined change in the surface morphology was observed with the varying volume of TPP. The sphericity of chitosan microspheres was lost at higher volume of cross-linking agent. The release of vitamin C from these microspheres was sustained and affected by the volume of cross-linking agent added. The release of vitamin C from TPP-chitosan microspheres followed Fick's law of diffusion.

The objectives were to investigate the effects of formulation variables on the release of drug and to optimize the formulation of chitosan microparticles loaded with drug for controlled release using response surface methodology. Chitosan microparticles were prepared by dropping a chitosan solution into sodium tripolyphosphate (TPP) through ionic cross-linking. The release behaviour of felodipine as a model drug was affected by preparation variables. A central composite design was used to evaluate and optimize the effect of preparation variables, chitosan concentration (X1), the pH of the TPP solution (X2) and cross-linking time (X3) on the cumulative per cent drug release (Y) in 24 h. Chitosan concentration and cross-linking time affected negatively the release of felodipine, while the pH of the TPP did so positively and was the highest influential factor. The optimum rate of drug release, 100% in 24 h, was achieved at 1.8% chitosan concentration, a pH 8.7 for the TPP solution and 9.7 min cross-linking time.

To prepare the sustained release vitamin C carriers, vitamin C was successfully encapsulated in tripolyphosphate (TPP) cross-linked chitosan (TPP-chitosan) microspheres by the spray-drying method at different manufacturing conditions. Manufacturing parameters (inlet temperature, liquid flow rate, chitosan concentration and volume of 1%  w/v TPP solution) had a significant influence on the characteristics of thus prepared microspheres. The optimum spray-drying conditions such as inlet temperature, liquid flow rate and compressed air flow rate for the encapsulation of vitamin C in TPP-chitosan microspheres was found to be 170°C, 2  ml  min -1 and 10  l  min -1 , respectively. The size and yield of the TPP-chitosan microspheres ranged from 3.9–7.3  µm and 54.5–67.5%, respectively. The encapsulation efficiency of TPP-chitosan microspheres ranged from 45.72–68.7% and it decreased with the increasing volume of 1%  w/v TPP solution. At the same cross-linking extent, the encapsulation efficiency of TPP-chitosan microspheres increased when the concentration of chitosan was increased from 0.5–1%  w/v. Effect of volume of 1%  w/v TPP solution on the surface morphology of chitosan microspheres was examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). These studies revealed that chitosan solution (250  ml) cross-linked with 15  ml 1%  w/v TPP solution produced more porous microspheres than that cross-linked with 5 and 10  ml TPP solution. The release rate of vitamin C from TPP-chitosan microspheres decreased when the concentration of chitosan was increased from 0.5–1.0%  w/v. Vitamin C release rate was also modulated by varying the volume of 1%  w/v TPP solution. The release rate of vitamin C from TPP-chitosan microspheres decreased with increasing volume (5–15  ml) of 1%  w/v TPP solution. [ABSTRACT FROM AUTHOR]

In this paper, the effect of chitosan molecular weight on the characteristics (size, encapsulation efficiency, zeta potential, surface morphology and release rate) of vitamin C encapsulated tripolyphosphate cross-linked chitosan (TPP-chitosan) microspheres. The molecular weight of chitosan had a noticeable influence on the size, encapsulation efficiency, zeta potential, surface morphology and controlled release behaviour of the vitamin C encapsulated TPP-chitosan microspheres. The mean particle size and encapsulation efficiencies of TPP-chitosan microspheres were 3.1, 4.9 and 6.7  µm and 67.25, 60.43 and 52.74% for the microspheres prepared using low, medium and high molecular weight chitosan, respectively. All the TPP-chitosan microspheres (low, medium and high molecular weight) had positive charge on their surface. The zeta potential of the TPP-chitosan microspheres prepared using low, medium and high molecular weight chitosan was 41.25, 40.84 and 39.13  mV, respectively. The particle sizes of TPP-chitosan microspheres increased with increases in chitosan molecular weight. Molecular weight of chitosan did not affect significantly the % yield of TPP-chitosan microspheres prepared by spray-drying. The influence of chitosan molecular weight on the surface morphology of vitamin C encapsulated TPP-chitosan microspheres was examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was observed that, as the molecular weight of chitosan increases, TPP-chitosan microspheres with uniform spherical shape could be obtained. The physical state of vitamin C (amorphous or crystalline) in TPP-chitosan matrix was studied by X-ray diffraction (XRD) and it was found that vitamin C is dispersed at the molecular level (amorphous) in the TPP-chitosan matrix. Release rate of the vitamin C from TPP-chitosan microspheres was significantly affected by the chitosan molecular weight. The release rate decreased with increase in the chitosan molecular weight. The release of vitamin C from TPP-chitosan microspheres followed Fick's law of diffusion. [ABSTRACT FROM AUTHOR]

Microspheres containing the anti-hypertension drug, felodipine, were prepared by the emulsion solvent evaporation method (o/o) using acrylate methacrylate copolymers, Eudragit RL PO and Eudragit RS PO, as wall materials. In order to increase the encapsulation efficiency, a mixed solvent system comprising 1:1 proportions of acetonitrile and dichloromethane was used as a dispersed phase. The morphology of the microspheres was evaluated using a scanning electron microscope, which showed a spherical shape with smooth surface. The mean sphere diameter was between 9.5-13.2 μm and the microencapsulation efficiencies ranged from 51.4-80.4%. The release profiles and encapsulation efficiencies depended strongly on the structure of the polymers used as wall materials. The release rate of the Eudragit RS PO microspheres was much lower than that of Eudragit RL PO microspheres. Whereas Eudragit RL PO microspheres followed the Higuchi rule, Eudragit RS PO microspheres exhibited a triphasic release profile. It is concluded that drug release rate can be controlled by choice of polymer type. [ABSTRACT FROM AUTHOR]