Search

Composites suitable for rotational molding technology based on poly(ε-caprolactone) (PCL) and filled with hollow glass microspheres (HGM) or functionalized hollow glass microspheres (HGMf) were prepared via melt-compounding. The functionalization of glass microspheres was carried out by a silanization treatment in order to improve the compatibility between the inorganic particles and the polymer matrix and achieve a good dispersion of glass microspheres in the matrix and an enhanced filler–polymer adhesion. The crystallization behavior of materials was studied by DSC under isothermal and non-isothermal conditions and the nucleating effect of the glass microspheres was proven. In particular, the presence of silanized glass microspheres promoted faster crystallization rates and higher nucleation activity, which are enhanced by 75% and 50%, respectively, comparing neat PCL and the composite filled with 20 wt% HGMf. The crystalline and supermolecular structure of PCL and composites crystallized from the melt was evaluated by WAXD and SAXS, highlighting differences in terms of crystallinity index and structural parameters as a function of the adopted crystallization conditions. [ABSTRACT FROM AUTHOR]

Innovative composites based on polyethylene (PE) filled with hollow glass microspheres (HGMs) were formulated and successfully prepared as suitable plastic materials for rotational molding technology. The HGMs here used allow to attain lightweight materials with a reduced resin content and appealing aesthetical qualities. To enhance filler dispersion and phase adhesion, thus improving the ultimate properties of the composite materials, two compatibilization strategies were adopted: namely, surface modification of HGMs by dodecyl(triethoxy)silane or addition during mixing of a maleinized PE as in‐situ coupling agent. The effectiveness of the surface treatments on HGMs was assessed by attenuated total reflectance Fourier‐transform infrared spectroscopy and thermogravimetric analysis investigations. PE‐based composites at various HGMs contents (5, 10, and 20 wt%) were prepared by melt blending. Morphology of untreated and modified HGMs, their dispersion in the composites as well as filler/matrix adhesion were investigated by SEM microscopy. Thermal, rheological and mechanical properties of the composites were studied in comparison with neat PE. Rotational molding tests carried out both in laboratory and industrial site demonstrated the feasibility of producing lightweight plastic items (weight reduction up to 17%) of excellent aesthetics on a large scale. [ABSTRACT FROM AUTHOR]

In this work, novel composites based on poly(ε-caprolactone) (PCL) were prepared and characterized in terms of morphological, thermal, rheological and mechanical properties. Hollow glass microspheres (HGM), alone or surface modified by treatment with (3-aminopropyl)triethoxysilane (APTES) in order to enhance the compatibility between the inorganic particles and the polymer matrix, were used to obtain lightweight composites with improved properties. The silanization treatment implies a good dispersion of filler particles in the matrix and an enhanced filler–polymer adhesion. The addition of HGM to PCL has relevant implications on the rheological and mechanical properties enhancing the stiffness of the material. Furthermore, the presence of HGM strongly interferes with the crystallization behavior and thermo-oxidative degradation of PCL. The increase of PCL crystallization rate was observed as a function of the HGM amount in the composites. Finally, rotational molding tests demonstrated the possibility of successfully producing manufactured goods in PCL and PCL-based composites on both a laboratory and industrial scale. [ABSTRACT FROM AUTHOR]