Search

In this study, geodetic and seismic phenomena occurring in the subduction zone were observed with two tiltmeters that were installed in seafloor boreholes drilled in the Kumano Basin in the Nankai Trough, southwest Japan. We used one electrolytic-type tiltmeter and one pendulum-type tiltmeter installed 6 and 19 m below the seafloor, respectively. The two tiltmeters have been continuously operated since 2019 and 2021, respectively. The records of the two tiltmeters showed microseisms, seismic signals of normal earthquakes, and variations that correlated well with the M2 tide (tidal response). The noise environment relative to existing seafloor observatories was assessed by comparing the power spectral densities of the tiltmeters and broadband seismometers in the seismic frequency band. The two tiltmeters and the seismometers showed similar spectral peaks in the microseism band, and at lower frequencies below 10–2 Hz, the pendulum tiltmeter had a noise level that was up to 20 dB lower than that of the broadband seismometers. The tidal responses of the tiltmeters were analyzed to reveal corresponding mechanisms because a large amplitude of the tidal response makes it difficult to detect geodetic phenomena. Considerable azimuthal dependence was observed in the NW–SE direction for both tiltmeters. The principal direction was approximately the same as the down-slope direction of the local bathymetry. This tendency was thus interpreted to be caused by the differences in the thickness of the sedimentary layer along the direction of the slope. Furthermore, the validity of the tilt measurements for the two tiltmeters was demonstrated by in-situ loading experiments, where the theoretical response of an elastic half-space medium was computed and compared with the experimental results. The results of the loading experiments can be explained using theoretical values with a set of realistic elastic moduli. [ABSTRACT FROM AUTHOR]

Optical fibers, stretched between anchors attached to the Earth and buried in boreholes and shallow trenches, offer an inexpensive and robust means to observe Earth strain. We have deployed several optical fiber strainmeters (OFSs) in boreholes, where thermal stability helps mitigate the noise from temperature changes. We have also constructed horizontal OFSs in 1‐m‐deep trenches of lengths 221 and 174 m. In these, a second optical fiber having a contrasting temperature coefficient provides a means to separate true strain from thermal noise. Signals in the seismic band from the horizontal strainmeters agree well with records from collocated seismometers, and the predominant ambient noise recorded by both techniques are consistent. Solid Earth strain tides with amplitude of 30 nε (nanostrain) are observed in these horizontal OFSs that agree well with those observed by collocated vacuum laser strainmeters. Noise at periods of a few days amounts to 50 nε. The two horizontal strainmeters show drift rates of up to 1 µε per month, and occasional false signals (evident from comparisons with the vacuum laser strainmeters) can accumulate occasionally to the order of 50 nε over times from hours to weeks. Results to date indicate that this technology on land could detect slow‐slip events of amplitude 100 nε and higher. Key Points: Several styles of long‐baseline optical fiber strainmeters have been deployedThe instruments are useful for the study of slow slip events, fluid injection, earth tides, and seismic signals, including for earthquake early warning [ABSTRACT FROM AUTHOR]