Search

The use of "crumb rubber" coming from recycling materials in outdoor floors like playgrounds has been a frequent practice during the last years. However, these surfaces are object of abrasion and weathering being a potential source of micro and nanoplastics (MNPLs) to the atmosphere and a potential source of human exposure to them. Our main goal has been to expose different crumb rubber materials to summer weathering effects. The released inhalable fractions were sampled for two months with passive samplers and the composition of MNPLs and plastic additives (organic and inorganic) were evaluated. The ecotoxicological effects of leached materials emulating runoff events was evaluated in freshwater micro crustacean Daphnia magna and the green algae Chlorella vulgaris. The analysis of MNPLs showed the presence of polyethylene, polypropylene, polybutadiene, polysiloxanes and polybutylene at concentrations up to 30,426 ng/m 3 . In the same fraction, we also identified up to 56 plastic additives, including antioxidants, pigments, copolymers, flame retardants, fungicides, lubricants, plasticizers, UV filters and metal ions. Finally, runoff ecotoxicological effects on D. magna and C. vulgaris showed that leached compounds, either from virgin or aged material, would be toxicants for exposed organisms although at concentrations much higher than those expected to be released to the media., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Microplastics (MPLs) are contaminants of emerging concern (CECs) ubiquitous in aquatic environments, which can be bioaccumulated along the food chain. In this study, the accumulation of polyethylene (PE), polystyrene (PS) and polyethylene terephthalate (PET) microplastics (MPLs) of sizes below 63 μm was assessed in Mediterranean mussels (Mytilus galloprovincialis spp). Moreover, the potential of mussels to uptake and bioaccumulate other organic contaminants, such as triclosan (TCS) and per- and polyfluoroalkyl substances (PFASs), was evaluated with and without the presence of MPLs. Then, the modulation of MPLs in the human bioaccessibility of co-contaminants was assessed by in vitro assays that simulated the human digestion process. Exposure experiments were carried out in 15 L marine microcosms. The bioaccumulation and bioaccessibility of PE, PS, PET, and co-contaminants were assessed by means of liquid chromatography -size exclusion chromatography-coupled to high-resolution mass spectrometry (LC(SEC)-HRMS). Our outcomes confirm that MPL bioaccumulation in filter-feeding organisms is a function of MPL chemical composition and particle sizes. Finally, despite the lower accumulation and bioaccumulation of PFASs in the presence of MPLs, the bioaccessibility assays revealed that PFASs bioaccessibility was favoured in the presence of MPLs. Since part of the bioaccumulated PFASs are adsorbed onto MPL surfaces by hydrophobic and electrostatic interactions, these interactions easily change with the pH during digestion, and the PFASs bioaccessibility increases., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Bioplastics arise as an alternative to plastic production delinked from fossil resources. However, as their demand is increasing, there is a need to investigate their environmental fingerprint. Here we study the toxicity of microplastics (MPLs) of two widely used materials, the polylactic acid (PLA) and the polyhydroxybutyrate (PHB) on the environmental aquatic model species Daphnia magna. The study was focused on sublethal behavioural and feeding endpoints linked to antipredator scape responses and food intake. The study aimed to test that MPLs from single-use household comercial items and among them bioplastics should be more toxic than those obtained from standard plastic polymers and fossil plastic materials due to the greater amount of plastic additives, and that MPLs should be more toxic than plastic extracts due to the contribution of both particle and plastic additive toxicity. MPLs were obtained by cryogenic grinding and sea-sand erosion to obtain irregular particles. MPL included standard polymers and nine comercial items of PLA and PHB and one fossil-based material of high-density polyethylene (HDPE). The additive content in commercial items was characterised by liquid chromatography coupled with high-resolution mass spectrometry. D. magna juveniles were exposed for 24 h to particles and their plastic extracts. Results indicated that the toxicity of bioplastic particles was five times higher than the effects produced by exposure to the content of the additives alone, that bioplastic particles were more toxic than fossil ones and that particles obtained from commercial items were more toxic than those obtained from PLA, PHB or HDPE polymer standards. Predicted toxicity from the measured plastic additives in the studied commercially available household items, however, was poorly related with the observed behavioural and feeding effects. Further research on unknown chemical components together with physical factors is need it to fully understand the mechanisms of toxicity of bioplastic materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

Plastic ingestion is one of the main impacts of marine litter on organisms. The occurrence of microplastics (MPs < 5 mm) in the stomachs of Mediterranean species was already reported in several studies. In this context, the present study aims to develop a new approach of digestion for the identification of MPs in the gastrointestinal tracts (GITs) of marine organisms. The new approach combines two digestion protocols, including potassium hydroxide (KOH) and nitric acid (HNO 3 ), to remove most organic and inorganic materials. This digestion allows recording small MPs that are difficult to find via routinely stomach content analysis and also to minimize the overestimation of the phenomenon trough the control of airborne contamination. The new approach was tested on a voracious pelagic opportunistic predator, the common dolphinfish, a fishery resource exploited in several Mediterranean areas. The results showed that a large amount of ingested meso- and microplastics, such as fragments or sheets, was recorded in GITs (F = 65.5 %). The FTIR analysis on litter samples allowed to identify polyethylene, polypropylene and polystyrene as dominant constituent polymers of microplastics. These results confirmed that our novel combined digestion protocol represents a reliable approach to detect MPs in opportunistic pelagic predators., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

One of the main routes of fish exposure to micro- and nanoplastics (MNPLs) is their ingestion. MNPLs can act as reservoirs of organic contaminants that are adsorbed onto their surfaces, or that can leach from their complex formulations, with potential impacts on biota and along the aquatic food chain. While MNPLs have been reported in fishes worldwide, complete information on MNPL compositions, polymers and additives continues to be scarce. In this work, the presence of MNPLs in the gastrointestinal tracts (GIT) of fish from the Ebro River (Spain) was investigated using a double suspected screening approach to assess and quantify polymers and additives. The sample-preparation procedure consisted of sequential alkaline and acidic digestions with KOH and HNO3, followed by ultrasonic-assisted extraction (USAE) with toluene. The analysis of polymers was carried out with size-exclusion chromatography followed by high-resolution mass spectrometry using an atmospheric pressure photoionization source, operating in negative and positive ionisation modes (SEC-(±)-APPI-HRMS) using full-scan acquisition (FS). Plastic additives were assessed using high-performance liquid chromatography with a C18 analytical column coupled to HRMS equipped with an electrospray ionisation source operating under positive and negative conditions (LC-(±ESI)-HRMS). The acquisition was performed in parallel with full-scan (FS) and data-dependent scan (ddMS2) modes, working under positive and negative ionisation modes. The polymers most frequently detected and quantified in fish GITs were polysiloxanes, polyethylene (PE), polypropylene (PP) and polystyrene (PS). PE was detected in 84% of the samples, with a concentration range from 0.55 to 3545 µg/g. On the other hand, plasticisers such as phthalates and stabilisers such as benzotriazoles were the most frequently identified plastic additives. [ABSTRACT FROM AUTHOR]

This correction notice addresses an incorrect 'Conflict of interest' statement in the original article titled "Plastics in biota: technological readiness level of current methodologies." The authors, Amy Lusher and Sebastian Primpke, are members of the Editorial Board of Microplastics and Nanoplastics, but they were not involved in the review or decision-making process for this manuscript. The original article has been updated to reflect this correction. [Extracted from the article]

Plastic debris has become an environmental problem during recent years. Among the plastic debris, microplastics (<5 mm; MPLs) imply an extra problem due to their capacity to enter into the fauna through ingestion. In this work, we study the capacity of three MPLs, that include high-density polyethylene (HDPE), polystyrene (PS) and polystyrene carboxylate (PS-COOH), to sorb 18 perfluoroalkyl substances (PFASs; including carboxylic acids, sulphonates and one sulphonamide) from the surrounding waters (freshwater and seawater). Conclusions drawn from the results are that perfluoro sulphonates and sulphonamides have more tendency to be sorbed onto MPLs. In addition, PS and PS-COOH have more affinity for PFASs than HDPE. Finally, the increment of conductivity and pH of the water decreases the exposure time that is necessary to reach equilibrium. However, the presence of salts decreases the tendency of PFASs to be sorbed onto plastic surfaces. These results highlight the problem associated with the presence of MPLs in inland and marine waters since toxic compounds can be sorbed onto surrounding plastics that could be ingested by aquatic fauna. [ABSTRACT FROM AUTHOR]

Human exposure to micro (nano)plastics (MNPLs) has become a significant concern as a potential health threat. Exposure routes include ingestion, inhalation, and dermal contact, being food and drinking water the primary sources of oral exposure. Here we present the quantification of polymers of MNPLs particles from 700 nm to 20 μm in bottled water commercialised in Spain, including an estimation of the potential risk for daily consumers. We evaluated samples from 20 popular brands in 0.5 and 1.5 L plastic bottles. A double-suspect screening approach developed and validated in our research group for drinking water was adapted for bottled water samples. The identification and quantification of MNPLs-polymers in mass units and the tentative identification of plastic additives (PA) until the second level of confidence was carried out based on high-performance liquid chromatography coupled to high-resolution mass spectrometry (HPLC-HRMS). The results showed the presence of polypropylene (PP), polyethylene (PE) and polypropylene terephthalate (PET) in the samples. Among them, PE was the most frequently detected and quantified polymer (55% of samples) followed by PET which was detected in 33% of the samples and showing the highest concentration (4700 ng L−1). The median value of the sum of polymer concentrations was 359 ng L−1. In addition, 28 plastic additives were detected, where at least one of them was present in 100% of the samples. Stabilizers and plasticisers were the most frequently identified. A prioritisation study was performed using a multi-QSAR modelling software, where bis(2-ethylhexyl) adipate and bis(2-ethylhexyl) phthalate were estimated as the most potentially harmful compounds for human health. Overall, findings suggest that bottled water is a non-negligible route to exposure to MNPLs. [Display omitted] • Polyethylene terephthalate was the polymer found at highest concentrations. • The most frequently detected polymer was polyethylene. • The median value of the sum of polymer concentrations was 359 ng L−1. • 28 plastic additives were tentative detected in waters analysed from plastic bottles of 20 different commercial brands. • Bis(2-ethylhexyl) adipate and bis(2-ethylhexyl) phthalate were the riskiest plastic additives for human health by the prioritisation study. [ABSTRACT FROM AUTHOR]

The occurrence, long-range atmospheric transport and deposition of micro and nano plastics (MNPLs) remains un-quantified for the oceanic atmosphereopen ocean. Here we show the characterisation of MNPLs and the aerosol composition (PM 10) in a north-south Atlantic transect from Vigo (Spain) to Punta Arenas (Chile). The analytical procedure to assess the composition of MNPLs consisted of a double suspect screening approach of the polymers and additives, the two constituents of plastics. Polymers were analysed by size exclusion chromatography coupled with high-resolution mass spectrometry using an atmospheric pressure photoionization source operated in positive and negative conditions (HPLC(SEC)-APPI(+/-)-HRMS). Plastic additives were screened with high-performance liquid chromatography coupled to high-resolution mass spectrometry using an electrospray ionisation source (HPLC-ESI(+/-)-HRMS). The most common polymers were polyethylene (PE), polypropylene (PP), polyisoprene (PI), and polystyrene (PS), with the highest polymer concentration being 51.7 ng·m−3 of PI. The air mass back trajectories showed the variable influence of oceanic and terrestrial air masses. These differences were reflected in the aerosol composition with different contributions of Saharan dust, sea spray aerosol, organic/elemental carbon, and MNPLs. Results showed that samples largely influenced by sea-spray and air masses originating from coastal South America and the north Atlantic subtropical gyre were more contaminated by MNPLs. Moreover, this information was complemented by the characterisation of the largest particles using scanning electron microscopy (SEM) and µ-Fourier Transform Infrared Spectroscopy (µ-FTIR). This work provides the first field evidence of the long-range transport of MNPLs in most of the Atlantic Ocean, as the result of dynamic coupling between the lower atmosphere and the surface ocean. Sea-spray formation arises as a key driver for the aerosolisation of MNPLs, and atmospheric transport followed by dry deposition may modulate the occurrence of MNPLs in large oceanic regions, issues that will require future research efforts. [Display omitted] • MNPLs in the Atlantic Ocean atmosphere in a north-south transect were characterized. • PE, PP, PI, and PS were the most common polymers. • The first field evidence of the LRAT of MNPLs in the Atlantic Ocean is presented. [ABSTRACT FROM AUTHOR]

• MNPLs were assessed in household tap waters in Barcelona. • PE, PP, PI, PBD, PS, PA, and PDMS were identified. • PE, PP, and PA were the most highly detected polymers. • Concentrations were similar to drinking water of other European cities. Microplastics (MPLs) are emerging persistent pollutants affecting drinking water systems, and different studies have reported their presence in tap water. However, most of the work has a focus on particles in the 100–5 µm range. Here, a workflow to identify and quantify polymers of micro and nanoplastics (MNPLs), with sizes from 0.7 to 20 µm in tap water, is presented. The analytical method consisted of water fractionated filtration followed by toluene ultrasonic-assisted extraction and size-exclusion chromatography, using an advanced polymer chromatography column coupled to high-resolution mass spectrometry with atmospheric pressure photoionization source with negative and positive ionization conditions (HPLC(APC)-APPI(±)-HRMS) and normal phase chromatography HILIC LUNA® column and electrospray ionisation source in positive and negative mode (HPLC(HILIC)-ESI(±)-HRMS). The acquisition was performed in full scan mode, and the subsequent tentative identification of MNPLs polymers has been based on increasing the confirmation level, including the characterisation of monomers by using Kendrick Mass Defect (KMD) analysis, and confirmation and quantification using standards. This approach was applied to assess MNPLs in tap water samples of the Barcelona Metropolitan Area (BMA), that were collected from August to October 2020 from home taps of volunteers distributed in the 42 postal codes of the BMA. Polyethylene (PE), polypropylene (PP), polyisoprene (PI), polybutadiene (PBD), polystyrene (PS), polyamide (PA), and polydimethylsiloxanes (PDMS) were identified. PE, PP, and PA were the most highly detected polymers, and PI and PBD were found at the highest concentrations (9,143 and 1,897 ng/L, respectively). A principal component analysis (PCA) was conducted to assess differences in MNPLs occurrence in drinking water, that was provided from the two drinking water treatment plants (DWTPs) suppliers. Results showed that no significant differences (at 95% confidence level) were established between the drinking water supplies to the different areas of the BMA. [ABSTRACT FROM AUTHOR]

This is the first work reporting the use of a double suspect-screening to assess most common polymers and additives in micro(nano)plastics (NPLs/MPLs) found in environmental waters. The method consisted of water filtration followed by ultrasonic-assisted extraction with toluene and analysis employing size exclusion chromatography using an advanced polymer chromatography column coupled to high-resolution mass spectrometry with an atmospheric pressure photoionisation source by negative ionisation conditions (LC(APC)-APPI(−)-HRMS). The identification of NPL/MPLs polymers has been based on increasing confirmation level, including the monomers characterisation by the Kendrick Mass Defect and confirmation and quantification when standards were available. In parallel, the identification of main additives in NPL/MPLs composition, as well organic contaminants adsorbed onto the plastic particles were carried out by analysis of the extracts by LC(C18)-APPI (+/−)-HRMS. To assess the impact of plastic pollution it is necessary to assess the composition in terms of polymers but also the additives. This screening approach has been employed to study composition of NPL/MPLs in the Ebro Delta. Two sampling campaigns including freshwater and seawater samples have been investigated to assess plastic composition in the top 5 cm. Polystyrene (PS), polyethylene (PE), polyisoprene (PI), polybutadiene (PBD), polypropylene (PP) and polysiloxanes were the most detected polymers and PP and PE, sizing between < 1000 and 2000 Da, were found at concentrations reaching up to 7000 ng/L in some areas. The pentadecanoic acid, 1,2,3-benzotriazoles, 2-ethylhexanoic acid (2-EHA), and phthalates such as dimethyl phthalate, mono(2-ethylhexyl) phthalate (MEHP) and the phthalimide were more frequently detected plastic additives. Finally, series of organic contaminants were as well detected in the particulate fraction. These organic contaminants cannot be associated to plastic compositions but can be associated to their adsorption to the particulate matter, in particular to NPL/MPLs, due to their non-polar character. Among these organic contaminants, the more frequently detected were pharmaceutical compounds, food additives and pesticides. ga1 • A suspected screening process to assess polymers and additives of MPLs/NPLs is presented. • The method was used to study the area of Ebro River. • Most commonly found polymers were PS, PE, PI, PBD, PP and polysiloxanes. • PP and PE were found at concentrations reaching up to 7000 ng/L in some areas. • The additives more frequently detected were pentadecanoic acid, 2-EHA, and phthalates. [ABSTRACT FROM AUTHOR]

The development of quantitative and qualitative analytical methods to assess micro-plastics (MPLs) and nano-plastics (NPLs) content in the environment is a central issue for realistic risk assessment studies. However, the quantitative analysis continues being a critical issue, in particular for MPLs from 100 μm down to the nano-sized range in complex environmental samples. This paper evaluates the potential of mass spectrometry for the analysis of MPLs and NPLs. The performance of different techniques including matrix-assisted laser desorption ionisation (MALDI) coupled to time-of-flight mass spectrometry (TOF-MS), liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS), and the ambient ionisation approaches as desorption electrospray ionisation (DESI) and direct analysis real-time (DART), were assessed for the study of polystyrene (PS) MPLs and NPLs in natural waters. A method based on LC-HRMS, equipped with an atmospheric pressure photoionisation source (APPI), operated in negative conditions for the quantitative analysis of PS MPLs and NPLs in natural waters, was developed. The chromatographic separation was achieved using an advanced polymer chromatographic (APC) column using toluene isocratic as the mobile phase. The optimal analytical method showed an instrumental limit of detection (ILOD) of 20 pg and methods limits of detection and quantification around 30 pg L−1 and 100 pg L−1, respectively. And, recoveries of 60 and 70% in samples from rivers and the marine coast, respectively. The performance of the new method was proved by the analysis of fortified samples and natural seawater samples. Image 1 • LC-APPI(−)HRMS method for the quantitative analysis of polystyrene microplastics. • LC separation was achieved using an advanced polymer chromatographic (APC) column. • The instrumental limit of detection (ILOD) was 20 pg. [ABSTRACT FROM AUTHOR]