Search

This paper summarizes our recent work on Grid‐Forming Inverter (GFM) application to power systems. We have developed a novel design of GFM, a single‐phase synchronous inverter (SSI) for the conventional 100/200V distribution network based on the concept of "non‐interference core (NIC) dynamic model." This paper first explains the design concept of NIC‐SSI and a simulation model of SSI for power system analysis. Then the stabilization effect is investigated, where the installation of SSI on the single‐phase consumer side is assumed as a new concept. The improvement of frequency and transient stability are evaluated. The SSI model is verified by comparing the developed root mean square (RMS) simulation, hardware‐in‐the‐loop (HIL) simulation, and the experiment using SSI hardware. The simulation results show that the SSI has the considerable ability of grid stabilization. Singlephase micro‐grid (SMG) operations using SSIs are also presented. The effectiveness of SMG operations is shown based on laboratory experiments. [ABSTRACT FROM AUTHOR]

Worldwide energy shortages and the green energy revolution have triggered an increase in the penetration of standalone microgrids. However, they have limited generation capacity and are wasteful when excess generated energy is curtailed. This presents an opportunity for the coordinated operation of multiple prosumer microgrids that absorb this waste to enhance their resiliency and reliability. This paper proposes a reliable prosumer model with an inbuilt energy management system (EMS) simulator that considers the mentioned deficiencies for constructing resilient interconnected prosumer microgrids. The EMS simulator operates in a real-time dynamic environment to coordinate the prosumer components and performs flexible switching for (1) prioritizing critical load by shedding the non-critical load and (2) meeting load demand locally or from other interconnected prosumers. The EMS simulator maintains energy balance by setting limits for the battery energy storage system (BESS) to preserve energy during low generation and performs real-time monitoring. The novelty of this model lies in its simplicity and flexibility, which allows interconnected prosumer microgrids to operate in cooperation without the need for communication. The proposed model is evaluated in a post-disaster off-grid scenario using a single-phase average value model that considers reasonable computation time. The simulation results of the proposed system indicate the preservation of stored energy while maintaining critical resources beyond three days of poor weather conditions. [ABSTRACT FROM AUTHOR]

A novel design of a single‐phase synchronous inverter (SSI) having noninterference core dynamic performance is proposed, referred to as noninterference core SSI (NIC‐SSI) in this paper. The proposed inverter consists of "core" and "shell." This novel design is advantageous for a flexible setting of the core controller to enhance power system stability, which is supported by the shell function for keeping robust synchronizing operation of inverters including microgrid operation. The novel points in this paper are summarized as: (a) the proposed controller enables SSIs to implement directly a desired dynamic characteristic such as a synchronous machine; (b) it can connect any single‐phase systems as well as three‐phase systems; (c) an islanded single‐phase microgrid without rotating machines can be stabilized by multiple SSIs. The proposed controller makes it possible to enhance system stability against increasing uncontrollable renewable energy sources (RESs) and static power conversion devices. The developed SSI realizes flexible use in the demand side operations under normal/faulted grid conditions. Hardware‐in‐the‐loop (HIL) testbed including the proposed digital controller and the real‐time simulator validates the effectiveness of the proposed controller in the experimental conditions. [ABSTRACT FROM AUTHOR]

This paper proposes a novel adaptive load frequency control (LFC) method based on model predictive control (MPC) using an unscented Kalman filter (UKF). The objective is to develop a robust LFC controller against the change in frequency characteristics of a power system. An adaptive MPC (AMPC) control is realized by updating the prediction model on-line to capture the frequency characteristics of a target system. A simplified prediction model is identified in the preliminary examination of the closed-loop performance of the target system, and then the system parameters are estimated in real-time circumstances. The estimated parameters include equivalent inertia of the target system. An interconnected three-area test system is used in the simulations to confirm the effectiveness of the proposed approach. The simulation results verify that the proposed MPC method can work successfully and efficiently handle the disturbances of the power system. The successful results also confirm that the proposed control scheme can be applied to a microgrid (MG) project, which is being promoted by the authors. [ABSTRACT FROM AUTHOR]