Search

The B4 topology is an interesting alternative to the conventional B6 inverter due to its reduced number of parts and lower cost. Although it has been widely used in the past, especially in low-power motor drive applications, its application as a grid-connected inverter is an open area of research. In this regard, this paper analyses the feasibility of the B4 inverter topology for grid-connected applications. A versatile 7 kW inverter prototype, which may be configured as B4 and B6, was built, allowing for a comprehensive evaluation of the performance of both topologies. Through an analytical study and experimental tests, the performance of the B4 and B6 topologies was comparatively evaluated in terms of efficiency, total harmonic distortion of line currents, current unbalance, cost, and mean time between failures. The study was carried out in the context of microgrid systems, highlighting their role in the integration of renewable energy and distributed generation. [ABSTRACT FROM AUTHOR]

In this paper a centralized control strategy for the efficient power management of the power converters conforming a hybrid distributed generation microgrid is explained. The microgrid is based on a DC and an AC bus. The study is focused on the converters connected to the DC bus. The proposed power management algorithm is implemented in a microgrid central processor. This algorithm is based on assigning several operation functions to each of the generators, loads and energy storage systems in the microgrid. A communication system is used to assign the operation functions to each of the microgrid elements. The power flows between the DC and AC buses are studied in several operation scenarios, in which the proposed control can be verified. Experimental and simulation results demonstrate that the algorithm allows to control the power dispatch inside the microgrid properly, by performing the following tasks: (1) the communications among power converters, the grid operator and intelligent loads, (2) the connection and disconnection of loads, (3) the control of the power exchange between the distributed generators and the energy storage system, (4) the compliance of the power dispatch limit set by the grid operator, (5) the synchronization with the grid and (6) the control of the voltage at the DC bus. [ABSTRACT FROM AUTHOR]

The results concerning the integration of a set of power management strategies and serial communications for the efficient coordination of the power converters composing an experimental DC microgrid is presented. The DC microgrid operates in grid connected mode by means of an interlinking converter. The overall control is carried out by means of a centralized microgrid controller implemented on a Texas Instruments TMS320F28335 DSP. The main objectives of the applied control strategies are to ensure the extract/inject power limits established by the grid operator as well as the renewable generation limits if it is required; to devise a realistic charging procedure of the energy storage batteries as a function of the microgrid status; to manage sudden changes of the available power from the photovoltaic energy sources, of the load power demand and of the power references established by the central controller; and to implement a load shedding functionality. The experimental results demonstrate that the proposed power management methodology allows the control of the power dispatch inside the DC microgrid properly. [ABSTRACT FROM AUTHOR]

In this paper, a centralized control strategy for the efficient power management of power converters composing a hybrid AC/DC microgrid is explained. The study is focused on the converters connected to the DC bus. The proposed power management algorithm is implemented in a microgrid central processor which is based on assigning several operation functions to each of the generators, loads and energy storage systems in the microgrid. The power flows between the DC and AC buses are studied in several operational scenarios to verify the proposed control. Experimental and simulation results demonstrate that the algorithm allows control of the power dispatch inside the microgrid properly by performing the following tasks: communication among power converters, the grid operator and loads; connection and disconnection of loads; control of the power exchange between the distributed generators and the energy storage system and, finally, supervision of the power dispatch limit set by the grid operator. [ABSTRACT FROM AUTHOR]

The concept of microgrid has emerged as a feasible answer to cope with the increasing number of distributed renewable energy sources which are being introduced into the electrical grid. The microgrid communication network should guarantee a complete and bidirectional connectivity among the microgrid resources, a high reliability and a feasible interoperability. This is in a contrast to the current electrical grid structure which is characterized by the lack of connectivity, being a centralized-unidirectional system. In this paper a review of the microgrids information and communication technologies (ICT) is shown. In addition, a guideline for the transition from the current communication systems to the future generation of microgrid communications is provided. This paper contains a systematic review of the most suitable communication network topologies, technologies and protocols for smart microgrids. It is concluded that a new generation of peer-to-peer communication systems is required towards a dynamic smart microgrid. Potential future research about communications of the next microgrid generation is also identified. [ABSTRACT FROM AUTHOR]

The high penetration of distributed generators, most of them based on renewable energy sources, is modifying the traditional structure of the electric distribution grid. If the power of distributed generators is high enough to feed the loads of a certain area, this area could be disconnected from the main grid and operate in islanded mode. Microgrids are composed by distributed generators, energy storage devices, intelligent circuit breakers and local loads. In this paper, a review of the main microgrid architectures proposed in the literature has been carried out. The microgrid architectures are first classified regarding their AC or DC distribution buses. Besides, more complex microgrid architectures are shown. Both advantages and disadvantages of each one of the microgrid families are discussed. [ABSTRACT FROM AUTHOR]