Search

Frequency control is one of the most important tasks in electric power systems. At the same time, in modern power systems with inertia-free converter-interfaced generation, this task has become more complex. Such an issue is especially relevant for microgrids, which are characterized by a significant increase in the rate of change of frequency and its nadir or zenith. An effective way is through the use of energy storage systems (ESSs) with a grid-forming control in microgrids. For this purpose, this paper proposes a novel structure of the control algorithm based on a current-control virtual synchronous generator (CC-VSG), in which the damping is performed using a feedforward controller. In addition, a simple proportional–integral controller is added to the CC-VSG structure to control the state of charge of the ESS. The performed frequency analysis proves the independence of the different control loop operations within the developed CC-VSG. At the same time, a methodology based on the bandwidth separation of different control loops is proposed for the CC-VSG tuning, which allows for the achievement of the desired quality of frequency regulation in the microgrid, taking into account both the energy recovery and the permissible frequency variation. Finally, the time-domain simulation using PSCAD/EMTDC is performed to confirm the obtained results.

The process of building microgrids on top of existing passive distribution networks warrants a multi-criteria analysis. Besides the calculation of the investment outlays needed for the modernization of distribution networks, such an analysis covers an assessment of the technological and economic effects of building microgrids. The resulting effects depend on the topology and configuration of distribution networks, specific microgrid features, the choice of the current type for the entire microgrid or its individual parts, the methods of connecting distributed energy resources (DERs), the availability and maturity of information and communications technology (ICT) infrastructure, and other factors. Comprehensive input data allow for designing an optimal microgrid configuration, but the main technological and economic effects are determined by the algorithms of operation and the parameter settings of the automatic control system (ACS) and the protection system. The known approaches to designing microgrids focus on addressing basic tasks while minimizing the investment required for their implementation. The above is fully justified when constructing new microgrids, but building microgrids on top of existing distribution networks, given the uniqueness of their topology and configuration, does not allow the use of standardized solutions. The development of approaches to the design of microgrids under such constraints, with minimized investment in the modernization of existing distribution networks, is an urgent task. The use of different types of current for individual microgrid segments determines the choice of the particular ACS and protection system, which depends on the availability of information and communications technology infrastructure. This article contributes a review of approaches to designing AC and AC–DC microgrids so as to maximize their technological and economic effects. We review techniques for analyzing the existing distribution networks aimed at choosing the type of current for the entire microgrid or its individual parts, the optimal points for the connection of microgrids to distribution networks, and the mix and capacity of DERs, with such choices informed by the conditions of the switching devices and information and communications technology infrastructure. This article presents the results of the analysis of approaches to choosing the optimal configuration of microgrids, microgrid ACS, and protection system, with an evaluation of the technological and economic effects subject to the minimization of investment in the modernization of the existing distribution networks.

The development of AC distribution systems provides for the seamless integration of low-voltage microgrids with distributed energy resources (DERs). This poses new challenges for the control of normal, emergency, and post-emergency states of microgrids, calling for the creation and development of information and communications technology infrastructure. Power converters/inverters that are used to integrate renewable DERs lack inertia. Along with them, fossil fuel-fired generation units are also being integrated into microgrids. These include gas generator sets, diesel generator sets, and microturbines, having small (up to 1–2 s) values of mechanical inertia constants—Tj. This leads to an increase in the rate of transients by a factor of 5–10. Under these conditions, the technical requirements for the speed of automatic power flow control systems, as well as the methods they rely on, have to be reconsidered. Microgrids include DC microgrids, AC microgrids, and hybrid (AC-DC) microgrids. In the case of hybrid microgrids, DERs are connected to the DC grid and are integrated into the AC grid through a common inverter. The complexity of the task of microgrid control is due to the need to choose properly the type and extent of control actions so as to prevent the emergence and development of accidents. The employed control methods must ensure the reliable power supply to consumers and the quality of power in microgrids, as well as the reliable operation of the external distribution systems into which they are integrated. The article gives an overview of control methods for low-voltage AC and AC-DC microgrids, which allow one to tackle effectively solve the tasks.

Energy performance contracts are a very promising area for attracting private investment in the renewable energy sector. The concept of energy performance contracting is a well-established mechanism aimed at increasing the energy efficiency of a facility and reducing annual maintenance costs. This paper presents a hierarchical model of a decentralized energy system with renewable energy sources and a battery energy storage system under an energy service agreement. This model reflects the interaction between the client and the performance company. The model includes the main parameters characterizing the energy service contract, such as net present value, contract duration and levelized cost of energy. As an example, a real decentralized power system is considered, which currently only uses diesel generation. In the case of building a photovoltaic system, the optimal equipment composition consists of a 100 kW solar station and storage batteries with a capacity of 240 kW·h. The optimal contract term is 5 years, and diesel fuel savings are 69%.

With the large-scale integration of distributed energy resources (DER) into passive distribution networks with voltages of up to 1 kV, these networks are being converted into microgrids. When the topology and operating conditions change, several challenging issues arise related to the functioning of the protection devices (PD) that are in operation. Most DERs, including renewable generators, are integrated into microgrids by means of inverters. In the event of short circuits (SC) in microgrids, these DERs provide a fault current contribution of no more than 1.2–2.0 Irated at the fault location. This makes it difficult to identify the fault location and to carry out the selective disconnection of the faulty element by means of conventional PDs. This article provides an overview of engineering solutions for improving conventional protection schemes that have been historically used in passive distribution networks, as well as for creating modern protection schemes based on innovative principles and new methods. The use of adaptive protections built on decentralized and centralized principles in most cases ensures the reliable protection of microgrids. Modern intelligent electronic devices (IEDs), where protection functions are implemented, rank higher with respect to their technical perfection in terms of reliability, sensitivity, selectivity, and speed performance. The use of multi-agent systems in the implementation of modern protection schemes requires the availability of broadband communication channels, which hinders their use because of the high cost. The combined use of fault current limiters (FCL) and energy storage systems (ESS) allows for the reliable operation of microgrid protections. The use of modern PDs ensures the reliable operation of DERs and power supply to consumers in microgrids, both in the case of grid-connected and islanded operation modes. Since there is no unified concept of designing protection schemes for microgrids with DERs, the choice of specific approaches to the design of protection schemes should be based on the results of a comparative technical and economic analysis of different options.

The modeling of battery energy storage systems (BESS) remains poorly researched, especially in the case of taking into account the power loss due to degradation that occurs during operation in the power system with a large penetration of generation from renewables and stochastic load from electric vehicles (EV). Meanwhile, the lifetime varies considerably from the manufacturer’s claim due to different operating conditions, and also depends on the level of renewable energy sources (RES) penetration, cyclic operation, temperature, discharge/charge rate, and depth of discharge. Choosing a simplistic approach to the degradation model can lead to unreliable conclusions in choosing the best management strategy and significant investment and operating costs. Most existing BESS models in stationary applications either assume zero degradation costs for storage or simplify battery life to a linear function of depth of discharge (DOD), which can lead to additional error in estimating the cost of BESS degradation. The complexity of constructing a lifetime model of BESS is due to the presence of nonlinear degradation of BESS at the beginning and at the end of the lifetime, as well as the difficulty in obtaining a large amount of experimental data that are close to the real-world operating conditions for the construction of most models. This article analyzes the features of BESS that are specific to their operation in microgrids in terms of the influence of the main stress factors on the degree of BESS degradation. This study also provides a review of existing models for assessing battery degradation.