Search

Identifying nonhormonal contraceptives will have profound impacts on avoiding side effects of hormonal birth control methods, minimizing pregnancy complications and infant mortality rates, and promoting family planning. However, phenotypic screening of contraceptives is challenging due to the diverse procedures associated with oocyte culture, biochemical assays, and molecular imaging. This study reports a multifunctional microfluidic platform comprising reconfigurable building blocks and interfaces to implement various cell-based drug screening protocols. This versatile platform has three major layers. The top layer consists of interchangeable 3D microfluidic building blocks ( e.g. , branching microchannels, chemical gradient generators, pumpless flow controllers, and emulsion generators) or an open interface. The middle layer incorporates a multiwell array with embedded membrane filters for live cell culture, medium exchange, enzymatic cumulus cell removal, washing, and fluorescence staining. The bottom layer is also reconfigurable for waste collection, oocyte culture, plate reader measurement, and high-resolution microscopy. We demonstrate an 8 by 16 (128 wells) system for performing the cumulus-oocyte complex (COC) expansion and oocyte maturation assays for screening nonhormonal contraceptives. The microfluidic building block platform is scalable and can be reconfigured for a variety of drug screening applications in the future.

Birth control and family planning play pivotal roles in the economic growth and reduction of maternal, infant, and child mortality. Current contraceptives, such as hormonal agents and intrauterine devices, target only a small subset of reproductive processes and can have serious side effects on the health of women. To develop novel contraceptive agents, a scalable microfluidic device is established for analyzing and screening the effects of potential contraceptive agents on the maturation of the cumulus-oocyte complex. The microfluidic device performs on-chip incubation for studying oocyte maturation and cumulus expansion and isolates the microwells by oil-water interfaces to avoid crosstalk between the wells. A filter membrane is incorporated in the device to simplify incubation, medium exchange, washing, and fluorescence staining of oocytes. Cumulus expansion can be monitored directly in the device and oocyte maturation can be examined after enzymatic removal of cumulus cells and on-chip fluorescence staining. The performance of the device is evaluated by studying the influence of three drugs known to block oocyte maturation and/or cumulus expansion., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Infectious diseases caused by bacterial pathogens remain one of the most common causes of morbidity and mortality worldwide. Rapid microbiological analysis is required for prompt treatment of bacterial infections and to facilitate antibiotic stewardship. This study reports an adaptable microfluidic system for rapid pathogen classification and antimicrobial susceptibility testing (AST) at the single-cell level. By incorporating tunable microfluidic valves along with real-time optical detection, bacteria can be trapped and classified according to their physical shape and size for pathogen classification. By monitoring their growth in the presence of antibiotics at the single-cell level, antimicrobial susceptibility of the bacteria can be determined in as little as 30 minutes compared with days required for standard procedures. The microfluidic system is able to detect bacterial pathogens in urine, blood cultures, and whole blood and can analyze polymicrobial samples. We pilot a study of 25 clinical urine samples to demonstrate the clinical applicability of the microfluidic system. The platform demonstrated a sensitivity of 100% and specificity of 83.33% for pathogen classification and achieved 100% concordance for AST., Competing Interests: The authors declare no conflict of interest.

Precision Medicine in Oncology requires tailoring of therapeutic strategies to individual cancer patients. Due to the limited quantity of tumor samples, this proves to be difficult, especially for early stage cancer patients whose tumors are small. In this study, we exploited a 2.4 × 2.4 centimeters polydimethylsiloxane (PDMS) based microfluidic chip which employed droplet microfluidics to conduct drug screens against suspended and adherent cancer cell lines, as well as cells dissociated from primary tumor of human patients. Single cells were dispersed in aqueous droplets and imaged within 24 hours of drug treatment to assess cell viability by ethidium homodimer 1 staining. Our results showed that 5 conditions could be screened for every 80,000 cells in one channel on our chip under current circumstances. Additionally, screening conditions have been adapted to both suspended and adherent cancer cells, giving versatility to potentially all types of cancers. Hence, this study provides a powerful tool for rapid, low-input drug screening of primary cancers within 24 hours after tumor resection from cancer patients. This paves the way for further technological advancement to cutting down sample size and increasing drug screening throughput in advent to personalized cancer therapy.

Schistosomiasis is a parasitic disease affecting over 200 million people worldwide. This study reports the design and development of a microfiltration device for isolating schistosome eggs in urine for rapid diagnostics of urogenital schistosomiasis. The design of the device comprises a linear array of microfluidic traps to immobilize and separate schistosome eggs. Sequential loading of individual eggs is achieved autonomously by flow resistance, which facilitates observation and enumeration of samples with low-abundance targets. Computational fluid dynamics modeling and experimental characterization are performed to optimize the trapping performance. By optimizing the capture strategy, the trapping efficiency could be achieved at 100% with 300 μl/min and 83% with 3000 μl/min, and the filtration procedure could be finished within 10 min. The trapped eggs can be either recovered for downstream analysis or preserved in situ for whole-mount staining. On-chip phenotyping using confocal laser fluorescence microscopy identifies the microstructure of the trapped schistosome eggs. The device provides a novel microfluidic approach for trapping, counting and on-chip fluorescence characterization of urinal Schistosoma haematobium eggs for clinical and investigative application.

Amperometric biosensors are widely applied for rapid biomarker detection in physiological and environmental samples. The dynamics and linearity of the current signal, however, are only partially understood. This study investigates the diffusion–reaction kinetics of amperometric biosensing using a self-assembled monolayer (SAM) based biosensor for bacterial 16S rRNA. A numerical model is developed to optimize the chamber dimensions and elucidate the concentration dependences of the biosensor. The results revealed that depletion of substrates associated with the chamber dimension can limit the current signal in a target concentration dependent manner. This study provides practical guidelines in the design and interpretation of microfluidic amperometric biosensors for biochemical applications. [ABSTRACT FROM AUTHOR]

Alternating current (AC) electrokinetics is a collection of processes for manipulating bulk fluid mass and embedded objects with AC electric fields. The ability of AC electrokinetics to implement the major microfluidic operations, such as pumping, mixing, concentration, and separation, makes it possible to develop integrated systems for clinical diagnostics in nontraditional health care settings. The high conductivity of physiological fluids presents new challenges and opportunities for AC electrokinetics–based diagnostic systems. In this review, AC electrokinetic phenomena in conductive physiological fluids are described followed by a review of the basic microfluidic operations and the recent biomedical applications of AC electrokinetics. The future prospects of AC electrokinetics for clinical diagnostics are presented. [ABSTRACT FROM AUTHOR]

This study reports the development of a portable whole cell biosensor system for environmental monitoring applications, such as air quality control, water pollution monitoring, and radiation leakage detection. The system consists of a lightweight mechanical housing, a temperature regulating system, and a microfluidic bacterial inoculation channel. The overall system, which is less than 200 g, serves as a portable incubator for cell inoculation and can be mounted on an unmanned aerial vehicle for monitoring remote and unreachable locations. The feedback control system maintains the inoculation temperature within 0.05 ^\circC. The large surface-to-volume ratio of the polydimethylsiloxane microchannel facilitates effective gas exchange for rapid bacterial growth. Molecular dynamic simulation shows effective diffusion of major gas pollutants in PDMS toward gas sensing applications. By optimizing the design, we demonstrate the operation of the system in ambient temperatures from 5 ^\circC to 32 ^\circC and rapid bacterial growth in microchannels compared to standard bacterial culture techniques. [ABSTRACT FROM PUBLISHER]

Rapid diagnosis of infectious diseases and timely initiation of appropriate treatment are critical determinants that promote optimal clinical outcomes and general public health. Conventional in vitro diagnostics for infectious diseases are time-consuming and require centralized laboratories, experienced personnel and bulky equipment. Recent advances in biosensor technologies have potential to deliver point-of-care diagnostics that match or surpass conventional standards in regards to time, accuracy and cost. Broadly classified as either label-free or labeled, modern biosensors exploit micro- and nanofabrication technologies and diverse sensing strategies including optical, electrical and mechanical transducers. Despite clinical need, translation of biosensors from research laboratories to clinical applications has remained limited to a few notable examples, such as the glucose sensor. Challenges to be overcome include sample preparation, matrix effects and system integration. We review the advances of biosensors for infectious disease diagnostics and discuss the critical challenges that need to be overcome in order to implement integrated diagnostic biosensors in real world settings. [ABSTRACT FROM AUTHOR]

Electrothermal flow is a promising technique in microfluidic manipulation toward laboratory automation applications, such as clinical diagnostics and high-throughput drug screening. Despite the potential of electrothermal flow in biomedical applications, relatively little is known about electrothermal manipulation of highly conductive samples, such as physiological fluids and buffer solutions. In this study, the characteristics and challenges of electrothermal manipulation of fluid samples with different conductivities were investigated systematically. Electrothermal flow was shown to create fluid motion for samples with a wide range of conductivity when the driving frequency was greater than 100kHz. For samples with low conductivities (below 1S/m), the characteristics of the electrothermal fluid motions were in quantitative agreement with the theory. For samples with high conductivities (greater than 1S/m), the fluid motion appeared to deviate from the model as a result of potential electrochemical reactions and other electrothermal effects. These effects should be taken into consideration for electrothermal manipulation of biological samples with high conductivities. This study will provide insights in designing microfluidic devices for electrokinetic manipulation of biological samples toward laboratory automation applications in the future. [Copyright &y& Elsevier]

Many components in biological matrices influence the result of an analysis, affecting assay sensitivity and reproducibility. Improved matrix management becomes critical as requirements for higher assay sensitivity and increased process throughput become more demanding. There are several robotic laboratory automation systems that are commercially available, which serve to minimize matrix interference by performing purification and extraction protocols. However, there is an unmet need of inline matrix effect reduction solutions to reduce the processing time and cost for automated sample preparation. In microfluidics, effective matrix management is essential for developing fully integrated systems capable of meeting these requirements. This review surveys current biological matrix management techniques for liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods and binding assays with a view toward building automatable processes. For some systems, simple sample-preparation methods, such as dilution and protein precipitation (PPT), are sufficient, whereas other systems require labor-intensive methods, such as liquid-liquid extraction (LLE) and solid-phase extraction (SPE). To achieve high throughput, PPT, LLE, and SPE have been adopted to 96-well-plate format. Online SPE has also been coupled with LC-MS/MS to automate sample preparation and analysis of urine, plasma, and serum matrices. However, offline processing of whole blood is still required to obtain plasma and serum. The ultimate goal of implementing sample preparation to reduce matrix effects within untreated sample is to achieve reproducibility and sensitivity required by the application; therefore, inline sample preparation integrated with molecular analysis will be highly significant for laboratory automation. Electrokinetic methods have the potential of handling whole-blood, urine, and saliva samples and can be incorporated into microfluidic systems for full automation. Optimization of analysis conditions and the use of appropriate standards have likewise assisted in reducing or correcting matrix effects and will also be discussed. [Copyright &y& Elsevier]

Cartridge-based microfluidics is a promising technology for clinical diagnostics. By miniaturizing the fluid-handling processes required for genomic and proteomic analyses, reagent and specimen volume is minimized along with the size of the system. We demonstrate an automated microfluidic system capable of performing six multiplexed genomic and proteomic analyses simultaneously, by means of an integrated electrochemical sensor and embedded controls. [Copyright &y& Elsevier]

Bloodstream infections are a significant cause of morbidity and mortality worldwide. The rapid initiation of effective antibiotic treatment is critical for patients with bloodstream infections. However, the diagnosis of bloodborne pathogens is largely complicated by the matrix effect of blood and the lengthy blood tube culture procedure. Here we report a culture-free workflow for the rapid isolation and enrichment of bacterial pathogens from whole blood for single-cell antimicrobial susceptibility testing (AST). A dextran sedimentation step reduces the concentration of blood cells by 4 orders of magnitude in 20–30 min while maintaining the effective concentration of bacteria in the sample. Red blood cell depletion facilitates the downstream centrifugation-based enrichment step at a sepsis-relevant bacteria concentration. The workflow is compatible with common antibiotic-resistant bacteria and does not influence the minimum inhibitory concentrations. By applying a microfluidic single-cell trapping device, we demonstrate the workflow for the rapid determination of bacterial infection and antimicrobial susceptibility testing at the single-cell level. The entire workflow from blood to categorical AST result can be completed in less than two hours. [ABSTRACT FROM AUTHOR]

AC electrothermal flow (ACEF) is the fluid motion created as a result of Joule heating induced temperature gradients. ACEF is capable of performing major microfluidic operations, such as pumping, mixing, concentration, separation and assay enhancement, and is effective in biological samples with a wide range of electrical conductivity. Here, we report long-range fluid motion induced by ACEF, which creates centimeter-scale vortices. The long-range fluid motion displays a strong voltage dependence and is suppressed in microchannels with a characteristic length below ∼300 μm. An extended computational model of ACEF, which considers the effects of the density gradient and temperature-dependent parameters, is developed and compared experimentally by particle image velocimetry. The model captures the essence of ACEF in a wide range of channel dimensions and operating conditions. The combined experimental and computational study reveals the essential roles of buoyancy, temperature rise, and associated changes in material properties in the formation of the long-range fluid motion. Our results provide critical information for the design and modeling of ACEF based microfluidic systems toward various bioanalytical applications. [ABSTRACT FROM AUTHOR]