Search

Microscale cell-based assays have demonstrated unique capabilities in reproducing important cellular behaviors for diagnostics and basic biological research. As these assays move beyond the prototyping stage and into biological and clinical research environments, there is a need to produce microscale culture platforms more rapidly, cost-effectively, and reproducibly. ‘Rapid’ injection molding is poised to meet this need as it enables some of the benefits of traditional high volume injection molding at a fraction of the cost. However, rapid injection molding has limitations due to the material and methods used for mold fabrication. Here, we characterize advantages and limitations of rapid injection molding for microfluidic device fabrication through measurement of key features for cell culture applications including channel geometry, feature consistency, floor thickness, and surface polishing. We demonstrate phase contrast and fluorescence imaging of cells grown in rapid injection molded devices and provide design recommendations to successfully utilize rapid injection molding methods for microscale cell-based assay development in academic laboratory settings. [ABSTRACT FROM AUTHOR]

This tutorial review offers protocols, tips, insight, and considerations for practitioners interested in using micromilling to create microfluidic devices. The objective is to provide a potential user with information to guide them on whether micromilling would fill a specific need within their overall fabrication strategy. Comparisons are made between micromilling and other common fabrication methods for plastics in terms of technical capabilities and cost. The main discussion focuses on “how-to” aspects of micromilling, to enable a user to select proper equipment and tools, and obtain usable microfluidic parts with minimal start-up time and effort. The supplementary information provides more extensive discussion on CNC mill setup, alignment, and programming. We aim to reach an audience with minimal prior experience in milling, but with strong interests in fabrication of microfluidic devices. [ABSTRACT FROM AUTHOR]

We present a simple method, called fluorescence-based assessment of plasma-induced hydrophilicity (FAPH), that enables spatial mapping of the local hydrophilicity of surfaces normally inaccessible by traditional contact angle measurement techniques. The method leverages the change in fluorescence of a dye, Nile Red, which is adsorbed on an oxygen plasma-treated surface, and its correlation with the contact angle of water. Using FAPH, we explored the effect of microchannel geometries on the penetration distance of oxygen plasma into a microchannel and found that entrance effects prevent uniform treatment. We showed that these variations have a significant impact on cell culture, and thus the design of cell-based microfluidic assays must consider this phenomenon to obtain repeatable and homogeneous results. [ABSTRACT FROM AUTHOR]

Microfluidic cell-based systems have enabled the study of cellular phenomena with improved spatiotemporal Control of the microenvironment and at increased throughput. While poly(dimethylsiloxane) (PDMS) has emerged as the most popular material in microfluidics research, it has specific limitations that prevent microfluidic platforms from achieving their full potential. We present here a complete process, ranging from mold design to embossing and bonding, that describes the fabrication of polystyrene (PS) microfluidic devices with similar cost and time expenditures as PDMS-based devices. Emphasis was placed on creating methods that can compete with PDMS fabrication methods in terms of robustness, complexity, and time requirements. To achieve this goal, several improvements were made to remove critical bottlenecks in existing PS embossing methods. First, traditional lithographic techniques were adapted to fabricate bulk epoxy molds capable of resisting high temperatures and pressures. Second, a method was developed to emboss through-holes in a PS layer, enabling creation of large arrays of independent microfluidic systems on a single device without need to manually create access ports. Third, thermal bonding of PS layers was optimized in order to achieve quality bonding over large arrays of microsystems. The choice of materials and methods was validated for biological function in two different cell-based applications to demonstrate the versatility of our streamlined fabrication process. [ABSTRACT FROM AUTHOR]