Search

Microfluidic paper-based analytical devices (μPADs) for detection of hydrogen peroxide and glucose have been developed. The analytical performance of colorimetric detection using the conventional starch-iodine color reaction has been significantly improved by using gelatin as the surface modifier which retains the enzyme activity in the dry filter paper strip, improves antioxidability, as well as decreases the strong background signal. Under optimal conditions, the color intensities show a good linear relationship with glucose concentration ranging from 0.5 to 5 mM and hydrogen peroxide concentration from 0.5 to 6 mM, with the detection limit of 0.05 mM and 0.1 mM, respectively. In addition, the accuracy of colorimetric sensor has been successfully assessed in detecting glucose from real human serum samples and recovery value ranges from 95.7% to 97%, which are approaching to the glucose oxidase endpoint. The new colorimetric assay exhibits high sensitivity, good selectivity, acceptable stability and reproducibility. The present approach is promising for monitoring glucose for point of care diagnostic applications, especially in regions with resource-limited settings., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Micro-/nanofluidics has received considerable attention over the past two decades, which allows efficient biomolecule trapping and preconcentration due to ion concentration polarization (ICP) within nanostructures. The rich scientific content related to ICP has been widely exploited in different applications including protein concentration, biomolecules sensing and detection, cell analysis, and water purification. Compared to pure microfluidic devices, micro-/nanofluidic devices show a highly efficient sample enrichment capacity and nonlinear electrokinetic flow feature. These two unique characterizations make the micro-/nanofluidic systems promising in high-performance bioanalysis. This review provides a comprehensive description of the ICP phenomenon and its applications in bioanalysis. Perspectives are also provided for future developments and directions of this research field.

We propose an in situ and label-free method for detection of biomolecular recognition events by use of a nanochannel-ion channel hybrid device integrated with an electrochemical detector. The aptamer is first immobilized on the outer surface of the nanochannel-ion channel hybrid. Its binding with target thrombin in solution considerably regulates the mass-transfer behavior of the device owing to the varied surface charge density and effective channel size. Via the electrochemical detector, the changed mass-transport property can be monitored in real time, which enables in situ and label-free detection of thrombin-aptamer recognition. The solution pH has a significant influence on detection sensitivity. Under optimal pH conditions, a detection limit as low as 0.22 fM thrombin can be achieved, which is much lower than most reported work. The present nanofluidic device provides a simple, ultrasensitive, and label-free platform for monitoring biomolecular recognition events, which would hold great potential in exploring the functions and reaction mechanisms of biomolecules in living systems.

A micro/nanofluidic enrichment device combined with the Förster resonance energy transfer (FRET) technique has been developed for sensitive detection of trace quantities of protein. In this approach, sample protein is first adsorbed on gold nanoparticles (AuNPs) to occupy part of the AuNP surface. Then, dye-labeled protein is added, which adsorbs to the residual active sites of the AuNP surface, saturating the AuNP surface with protein molecules. The unadsorbed dye-labeled protein remains in a free state in the system. Keeping a fixed amount of dye-labeled protein, a high concentration of sample protein leads to more free dye-labeled protein molecules remaining in the system, and thus a larger photoluminescence signal. Under the action of an electric field, the free dye-labeled protein molecules can be efficiently enriched in front of the nanochannel of a micro/nanofluidic chip, which greatly amplifies the magnitude of the photoluminescence and improves the detection sensitivity. As a demonstration, bovine serum albumin (BSA) and fluorescein isothiocyanate-labeled dog serum albumin (FITC-DSA) are used as sample and fluorescent proteins, respectively. Using the proposed strategy, a detection limit of BSA as low as 2.5 pg/mL can be achieved, which is more than 10(3) times lower than the reported minimums in most sensitive commercial protein quantification methods.

We propose a novel method to obtain versatile droplets arrays on a regional hydrophilic chip that is fabricated by PDMS soft lithography and regional plasma treatment. It enables rapid liquid dispensation and droplets array formation just making the chip surface in contact with solution. By combining this chip with a special Christmas Tree structure, the droplets array with concentrations in gradient is generated. It possesses the greatly improved performance of convenience and versatility in bioscreening and biosensing. For example, high throughput condition screening of toxic tests of CdSe quantum dots on HL-60 cells are conducted and cell death rates are successfully counted quickly and efficiently. Furthermore, a rapid biosensing approach for cancer biomarkers carcinoma embryonic antigen (CEA) is developed via magnetic beads (MBs)-based sandwich immunoassay methods.

We present a facilely prepared graphene oxide (GO)/ poly(dimethylsiloxane) (PDMS) composite by dispersing nanosized GO in PDMS. On the basis of the combination of photothermal effects of GO and grafted thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAAm), an optical-driving approach for remote control of localized wettability is realized. And this method has been successfully applied in the spatially controlled reversible protein adsorption in microfluidic devices.

Hydroxyl radicals (˙OH) play an important role in human diseases. Traditional detection methods are time consuming and require expensive instruments. Here, we present a simple and sensitive method for the detection of hydroxyl radicals on a microfluidic chip using an electrochemical technique. Aniline monomer is electrochemically polymerized on the surface of a pencil graphite electrode and carbonized at 800 °C. The resulting N-doped porous carbon nanofiber-modified pencil graphite electrode is embedded into a microfluidic chip directly as a working electrode. 4-Hydroxybenzoic acid (4-HBA) is selected as the trapping agent owing to its unique 3,4-DHBA product and high trapping efficiency. A low detection limit of 1.0 × 10(-6) M is achieved on the microfluidic chip. As a demonstration, the microfluidic chip is successfully utilized for the detection of ˙OH in cigarette smoke. The strong π-π stacking and hydrophobic interactions between the nitrogen-doped carbon materials and the pencil graphite make the modified electrode well-suited for the microfluidic chip.

A sensitive approach to the determination of reactive oxygen species (ROS) in puffs of cigarette smoke (CS) has been developed. The experimental system consists of a microfluidic chip electrophoresis and a laser induced fluorescence (LIF) device enhanced by localized surface plasmon resonance. Core-shell Ag@SiO2 nanoparticles were prepared and then immobilized on the surface of the microchannel to increase the fluorescence intensity based on localized surface plasmon resonance-enhanced fluorescence (LSPREF) effect. The ROS in puffs of CS were trapped via the oxidation of 2',7'-dichlorodihydrofluorescein (DCHF) that had been loaded on polyacrylonitrile (PAN) nanofibers in a micro-column. Determination of ROS was based on the amount of 2',7'-dichlorofluorescein (DCF), which is the sole product from DCHF oxidation. With the optimization of the trapping efficiency, we detected about 8.0 pmol of ROS per puff in the mainstream CS. This microchip electrophoresis-SPREF system enables sensitive quantitation of ROS in CS with low consumption of reagent, material, and analysis time.

The rapid recognition of cancer cells and detection of tumor biomarker survivin mRNA plays a critical role in the early diagnosis of many cancers. Based on the integration of specific cancer cell capture and intracellular survivin mRNA detection, this work presents a novel and sensitive on-chip approach for the bioanalysis of survivin mRNA in a single living cell. The microchannel surface was firstly modified with a prostate stem cell antigen (PSCA) monoclonal antibody as the recognition element for prostate cancer cells (PC-3). As a result of the antigen-antibody specific affinity interactions, PC-3 cells could be selectively captured on the microchannel surface. After cell capture, nano-sized graphene oxide-poly(ethylene glycol) bis(amine) (NGO-PEG) was employed as a quencher and carrier of a signal tag, fluorescein isothiocyanate (FITC)-labeled antisense oligonucleotide (F-S1), which is complementary to part of survivin mRNA (target survivin mRNA), to transfect into the captured PC-3 cells. Upon the selective binding of S1 to intracellular survivin mRNA, F-S1 will be released from the NGO-PEG, inducing the fluorescence recovery of FITC. This antibody-based microfluidic device enables simple and inexpensive monitoring of the amount of survivin mRNA in single captured cell without the need for sample pretreatment. The survivin mRNA content in each PC-3 cell was estimated to be (4.8 ± 1.8) × 10(6) copies. This strategy opens a different perspective for ultrasensitive survivin mRNA detection, which may facilitate the early screening for malignancy.

The investigation of enzyme reaction kinetics in nanoconfined spaces mimicking the conditions in living systems is of great significance. Here, a nanofluidics chip integrated with an electrochemical detector has been designed for studying "free state" enzyme reaction kinetics in nanoconfinement. The nanofluidics chip is fabricated using the UV-ablation technique developed in our group. The enzyme and substrate solutions are simultaneously supplied from two single streams into a nanochannel through a Y-shaped junction. The laminar flow forms in the front of the nanochannel, then the two liquids fully mix at their downstream where a homogeneous enzyme reaction occurs. The "free state" enzyme reaction kinetics in nanoconfinement can thus be investigated in this laminar flow based nanofluidics device. For demonstration, glucose oxidase (GOx) is chosen as the model enzyme, which catalyzes the oxidation of beta-d-glucose. The reaction product hydrogen peroxide (H2O2) can be electrochemically detected by a microelectrode aligning to the end of nanochannel. The steady-state electrochemical current responding to various glucose concentrations is used to evaluate the activity of the "free state" GOx under nanoconfinement conditions. The effect of liquid flow rate, enzyme concentration, and nanoconfinement on reaction kinetics has been studied in detail. Results show that the "free state" GOx activity increases significantly compared to the immobilized enzyme and bath system, and the GOx reaction rate in the nanochannel is two-fold faster than that in bulk solution, demonstrating the importance of "free state" and spatial confinement for the enzyme reaction kinetics. The present approach provides an effective method for exploiting the "free state" enzyme activity in nanospatial confinement.

Fluorescence analysis has proved to be a powerful detection technique for achieving single molecule analysis. However, it usually requires the labeling of targets with bright fluorescent tags since most chemicals and biomolecules lack fluorescence. Conventional fluorescence labeling methods require a considerable quantity of biomolecule samples, long reaction times and extensive chromatographic purification procedures. Herein, a micro/nanofluidics device integrating a nanochannel in a microfluidics chip has been designed and fabricated, which achieves rapid protein concentration, fluorescence labeling, and efficient purification of product in a miniaturized and continuous manner. As a demonstration, labeling of the proteins bovine serum albumin (BSA) and IgG with fluorescein isothiocyanate (FITC) is presented. Compared to conventional methods, the present micro/nanofluidics device performs about 10(4)-10(6) times faster BSA labeling with 1.6 times higher yields due to the efficient nanoconfinement effect, improved mass, and heat transfer in the chip device. The results demonstrate that the present micro/nanofluidics device promises rapid and facile fluorescence labeling of small amount of reagents such as proteins, nucleic acids and other biomolecules with high efficiency.

Continuous plasma separation will be greatly helpful for dynamic metabolite monitoring in kinetics research and drug development. In this work, we proposed a continuous on-chip plasma separation method based on the natural aggregating and sedimentation behavior of red blood cells at low shear rate. In this approach, a glass capillary was first used to realize quick and obvious delamination of blood cells from plasma. A novel "dual-elbow" connector was designed to change the direction of delamination. The blood was finally separated by laminar flow and bifurcation on the microchip. Results demonstrated that the present device can efficiently and stably separate plasma from blood in a continuous means, e.g., in a 4 h separation we did not observe clogging or a trend of clogging. In addition, the present approach can avoid the damage to cells which usually occurs in separation with high shear rate in a microchannel and possible contaminants to plasma. The proposed microchip device is robust, simple, and inexpensive for long time plasma separation with high plasma recovery and less sample consumption. The present work provides an effective tool for metabolite monitoring in pharmacokinetics research and drug development.

Size-tunable nanofluidic devices coupled to an electrochemical detector have been designed and then used to study glucose oxidase (GOx) reaction kinetics confined in nanospaces. The devices are fabricated via a photochemical decomposition reaction, which forms nanochannels covered with carboxyl groups. The generated carboxyl groups enable us to chemically pattern biological molecules on the polymer surfaces via covalent bonding. With this approach, the activity of the immobilized biological molecules confined in nanospaces with different sizes has been investigated. GOx species are chemically immobilized on the surface of the nanochannels, catalyzing the oxidation of substrate glucose as it flows through the channels. The enzyme reaction product, hydrogen peroxide, passing through the nanochannels, reaches an electrochemical detector, giving rise to an increase in anodic current. This steady-state electrochemical current, which responds to various glucose concentrations, can be used to evaluate the GOx activity under confinement conditions. The results show significant nanoconfinement effects that are dependent on the channel size where the reaction occurs, demonstrating the importance of spatial confinement on the GOx reaction kinetics. The present approach provides an effective method for the study of enzyme activity and other bioassay systems, such as cell assays, drug discovery, and clinical diagnosis., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report a controllable method to fabricate silica colloidal crystals at defined position in microchannel of microuidic devices using simple surface modification. The formed PCs (photonic crystals) in microfluidic channels were stabilized by chemical cross-linking of Si-O-Si bond between neighboring silica beads. The voids among colloids in PCs integrated on microfluidic devices form interconnected nanoporous networks, which show special electroosmotic properties. Due to the "surface-charge induced ion depletion effect" mechanism, FITC-labeled proteins can be efficiently and selectively concentrated in the anodic boundary of the ion depletion zone. Using this device, about 10(3) - to 10(5)-fold protein concentration was achieved within 10 min. The present simple on chip protein concentration device could be a potential sample preparation component in microfluidic systems for practical biochemical assays., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

As a label-free alternative of conventional flow cytometry, chip-based impedance measurement for single cell analysis has attracted increasing attentions in recent years. In this paper, we designed a T-shape microchannel and fabricated a pair of gold electrodes located horizontally on each side of the microchannel using a transfer printing method. Instant electric signals of flowing-through single cells were then detected by connecting the electrodes to a Keithley resistance and capacitance measurement system. Experimental results based on the simultaneous measurement of resistance and capacitance demonstrated that HL-60 and SMMC-7721 cells could be differentiated effectively. Moreover, SMMC-7721 cells at normal, apoptotic and necrotic status can also be discriminated in the flow. We discussed the possible mechanism for the discrimination of cell size and cell status by electrical analysis, and it is believed that the improvement of detection with our design results from more uniform distribution of the electric field. This microfluidic design may potentially become a promising approach for the label-free cell sorting and screening., (Copyright © 2011 Elsevier B.V. All rights reserved.)

This paper presents a simple and cost-effective UV-ablation technique for fabrication of size-tunable nanofluidics devices via photochemical decomposition reaction. UV-irradiation through a PET photomask results in continuous decomposition of poly(carbonate) (PC), forming nanochannel and carboxyl groups on the surface of the etched PC. This photochemical decomposition process occurs at molecular scale, therefore, the depth of nanochannels can be controlled at nanometer level. The etching rate is estimated to be ca. 0.015 nms(-1). To demonstrate the potential application of the present UV-ablation technique, a nanochannel was fabricated and integrated with microchannels to form a micro/nanofluidics chip for protein concentration. Using this device, about 10(3)-10(5) fold protein concentration can be achieved within 10 min. The present approach offers a simple and practical solution to fabricate nanofluidics devices at low-cost, and the resulting device could provide ideal platforms for μTAS towards various applications in biology and chemistry., (Copyright © 2011 Elsevier B.V. All rights reserved.)

In this paper, a micro/nanofluidic preconcentration device integrated with an electrochemical detector has been used to study the enrichment of enzymes and homogeneous enzyme reaction kinetics. The enzymes are first concentrated in front of a nanochannel via an exclusion-enrichment effect (EEE) mechanism of the nanochannel integrated in a microfluidics device. If a substrate is electrokinetically transported to the concentrated enzymes, homogeneous enzymatic reaction occurs. The enzymatic reaction product can penetrate through the nanochannel to be detected electrochemically. In this device, the enriched enzymes can be well retained and repeatedly used, thus, the enzymatic reaction occurs in a continuous-flow mode. For demonstration, Glucose oxidase (GOx) was chosen as the model enzyme to study the influence of enzyme concentration on its reaction kinetics. The different concentration of GOx in front of the nanochannel was simply achieved by using different enrichment time. When substrate glucose was introduced electrokinetically, a rapid electrochemical steady-state response could be obtained. It was found that the electrochemical response to a constant glucose concentration increased with the increase of enzyme enrichment time, which is expected for homogeneous enzymatic reactions. Under proper conditions, the electrochemical responds linearly to the glucose concentration ranging from 0 to 15 mM, and the Michaelis constants (K(m)) are relatively low, which indicates a more efficient complex formation between enzyme and substrate. These results suggest that the present micro/nanofluidics device is promising for the study of enzymatic reaction kinetics and other bioassays such as cell assays, drug discovery, and clinical diagnosis.

A facile and disposable microfluidic device for rapid protein concentration was fabricated by using a direct printing process. Two printed V-shaped microchannels in mirror image orientation were separated by a 100 mum wide toner gap. When a high electric field was applied across the two channels, nanofissures were formed by electric breakdown at the junction toner gap. This microfluidic device with nanofissures was used as a concentrator for protein. Negatively charged proteins were observed to concentrate at the anode side of the nanofissures upon application of an electric field across this junction. Using this device, about 10(3)-10(5)-fold protein concentration was achieved within 10 min. Systematic investigation showed that the concentration mechanism could be explained by the ion exclusion-enrichment effect of the nanofissures. In addition, the present microchip device integrated both functions of concentration and purification were confirmed. This simple on chip protein preconcentration and purification device could be a disposable sample preparation component in printed microfluidic systems used for practical biochemical assays.

We firstly transformed the traditional Michaelis-Menten equation into an off-line form which can be used for evaluating the Michaelis-Menten constant after the enzymatic reaction. For experimental estimation of the kinetics of enzymatic reactions, we have developed a facile and effective method by integrating an enzyme microreactor into direct-printing polymer microchips. Strong nonspecific adsorption of proteins was utilized to effectively immobilize enzymes onto the microchannel wall, forming the integrated on-column enzyme microreactor in a microchip. The properties of the integrated enzyme microreactor were evaluated by using the enzymatic reaction of glucose oxidase (GOx) with its substrate glucose as a model system. The reaction product, hydrogen peroxide, was electrochemically (EC) analyzed using a Pt microelectrode. The data for enzyme kinetics using our off-line form of the Michaelis-Menten equation was obtained (K(m) = 2.64 mM), which is much smaller than that reported in solution (K(m) = 6.0 mM). Due to the hydrophobic property and the native mesoscopic structure of the poly(ethylene terephthalate) film, the immobilized enzyme in the microreactor shows good stability and bioactivity under the flowing conditions.

We developed a facile and rapid one-step technique for design and fabrication of passive micromixers in microfluidic devices using a direct-printing process. A laser printing mechanism was dexterously adopted to pattern the microchannels with different gray levels using vector graphic software. With the present method, periodically ordered specific bas-relief microstructures can be easily fabricated on transparencies by a simple printing process. The size and shape of the resultant microstructures are determined by the gray level of the graphic software and the resolution of the laser printer. Patterns of specific bas-relief microstructures on the floor of a channel act as obstacles in the flow path for advection mixing, which can be used as efficient mixing elements. The mixing effect of the resultant micromixer in microfluidic devices was evaluated using CCD fluorescence spectroscopy. We found that the mixing performance depends strongly on the gray level values. Under optimal conditions, fast passive mixing with our periodic ordered patterns in microfluidic devices has been achieved at the very early stages of the laminar flow. In addition, fabrication of micromixers using the present versatile technique requires less than an hour. The present method is promising for fabrication of micromixers in microfluidic devices at low cost and without complicated devices and environment, providing a simple solution to mixing problems in the micro-total-analysis-systems field.