Search

Establishing rapid, simple, and in situ detection of microcystin-LR (MC-LR) in drinking water sources is of significant importance for human health. To ease the situation that current methods cannot address, an open surface droplet microfluidic magnetosensor was designed and validated to quantify MC-LR in reservoir water, which is capable of (1) MC-LR isolation via MC-LR antibody-conjugated magnetic beads, (2) parallel and multistep analytical procedures in 15-array power-free and reusable active droplet microfluidic chips, (3) immunoassay incubation and fluorescence excitation within a miniaturized multifunctional 3D-printing optosensing accessory, and (4) signal read-out and data analysis by a user-friendly Android app. The proposed smartphone-based fluorimetric magnetosensor exhibited a low limit of detection of 1.2 × 10 -5 μg/L in the range of 10 -4 μg/L to 100 μg/L. This integrated and high throughput platform was utilized to draw an MC-LR contamination map for six reservoirs distributed in the Pearl River delta, Guangdong Province. It promises to be a simple and successful quantification method for MC-LR field detection, bringing many benefits to rapid on-site screening.

We introduce a novel and versatile microfluidic technology that allows parallel and multi-step bioanalytical procedures to be simply implemented by switching reagent-containing droplet arrays among alternative interaction zones for intended mass or energy transport in a programmable manner. This enables multiplexed complex bioassays for point-of-care testing.

Screening for potential drug combinations presents significant challenges to the current microfluidic cell culture systems, due to the requirement of flexibility in liquid handling. To overcome this limitation, we present here an open-access microfluidic tissue array system specifically designed for drug combination screening. The microfluidic chip features a key structure in which a nanoporous membrane is sandwiched by a cell culture chamber array layer and a corresponding media reservoir array layer. The microfluidic approach takes advantage of the characteristics of the nanoporous membrane: on one side, this membrane permits the flow of air but not liquid, thus acting as a flow-stop valve to enable automatic cell distribution; on the other side, it allows diffusion-based media exchange and thus mimics the endothelial layer. In synergy with a liquid-transferring platform, the open-access microfluidic system enables complex multistep operations involving long-term cell culture, medium exchange, multistep drug treatment, and cell-viability testing. By using the microfluidic protocol, a 10 × 10 tissue array was constructed in 90 s, followed by schedule-dependent drug testing. Morphological and immunohistochemical assays indicated that the resultant tumor tissue was faithful to that in vivo. Drug-testing assays showed that the incorporation of the nanoporous membrane further decreased killing efficacy of the anticancer agents, indicating its function as an endothelial layer. Robustness of the microfluidic system was demonstrated by implementing a three-factor, three-level orthogonal screening of anticancer drug combinations, with which 67% of the testing (9 vs. 27) was saved. Experimental results demonstrated that the microfluidic tissue system presented herein is flexible and easy-to-use, thus providing an ideal tool for performing complex multistep cell assays with high efficiencies.

A microfluidic chip was developed for one-step identification and antimicrobial susceptibility testing (AST) of multiple uropathogens. The polydimethylsiloxane (PDMS) microchip used had features of cell culture chamber arrays connected through a sample introduction channel. At the bottom of each chamber, a paper substrate preloaded with chromogenic media and antimicrobial agents was embedded. By integrating a hydrophobic membrane valve on the microchip, the urine sample can be equally distributed into and confined in individual chambers. The identification and AST assays on multiple uropathogens were performed by combining the spatial resolution of the cell culture arrays and the color resolution from the chromogenic reaction. The composite microbial testing assay was based on dynamic changes in color in a serial of chambers. The bacterial antimicrobial susceptibility was determined by the lowest concentration of an antimicrobial agent that is capable of inhibiting the chromogenic reaction. Using three common uropathogenic bacteria as test models, the developed microfluidic approach was demonstrated to be able to complete the multiple colorimetric assays in 15 h. The accuracy of the microchip method, in comparison with that of the conventional approach, showed a coincidence of 94.1%. Our data suggest this microfluidic approach will be a promising tool for simple and fast uropathogen testing in resource-limited settings.

A handheld flow genetic analysis system (FGAS) is proposed for rapid, sensitive, multiplex and real-time quantification of nucleic acids at the point-of-care (POC) level. The FGAS includes a helical thermal-gradient microreactor and a microflow actuator, as well as control circuitry for temperature, fluid and power management, and smartphone fluorescence imaging. All of these features are integrated into a field-portable and easy-to-use molecular diagnostic platform powered by lithium batteries. Due to the unique design of the microreactor, not only steady temperatures for denaturation and annealing/extension but also a linear thermal gradient for spatial high-resolution melting can be achieved through simply maintaining a single heater at constant temperature. The smartphone fluorescence imaging system has a wide field of view that captures all PCR channels of the microreactor in a single snapshot without the need for any mechanical scanning. By these designs, the FGAS enables real-time monitoring of the temporal and spatial fluorescence signatures of amplicons during continuous-flow amplification. On the current FGAS, visual detection of as little as 10 copies per μL of genomic DNA of Salmonella enterica was achieved in 15 min, with real-time quantitative detection of the DNA over 6 orders of magnitude concentration from 10(6) to 10(1) copies per μL also completed in 7.5-15 min. In addition, multiple pathogenic DNA targets could be simultaneously discriminated with direct bar-chart readout or multiplex spatial melting in serial flow. We anticipate that the FGAS has great potential to become a next-generation gene analyzer for POC molecular diagnostics.