Search

Heterojunctioned architectures were facilely fabricated using hydrothermally treated electrospun TiO 2 nanofibers in an alkaline Sr(NO 3 ) 2 precursor solution in an electronic oven. TiO 2 on the fiber surface was partially dissolved into Ti 4+ to react with Sr 2+ in favor of the nucleation of SrTiO 3 on TiO 2 nanofibers, and thus a heterojunction was formed between SrTiO 3 and TiO 2 , which will benefit the improvement of photocatalytic activity. And then a multifunctional membrane was created by functionalizing the surface of commercial cellulose acetate (CA) membrane with heterojunctioned SrTiO 3 /TiO 2 nanofibers. This newly structured membrane exhibited excellent water purification performances in a concurrent photocatalytic membrane filtration system under the irradiation of UV light, because it is able to integrate the advantages of photocatalysis and membrane filtration while minimizes their disadvantages. The high water purification performances in terms of high photodegradation ability and high permeate flux are attributed to the high photocatalytic activity of heterojunctioned SrTiO 3 /TiO 2 nanofibers architectures and their structured porous functional layer favorable for fast water pass through. [ABSTRACT FROM AUTHOR]

Abstract: Here, hierarchically meso/nanoporous TiO2 was successfully fabricated by a facile and efficient hydrolysis and calcination method using Ti(OC4H9)4 and K2S2O8 as precursors. The hydrosol was firstly prepared by drop-wise adding ethanol dissolved Ti(OC4H9)4 solution into acetone dissolved K2S2O8 solution under a vigorous stirring and heating condition. After being sufficiently hydrolyzed, the hydrosol was calcined to promote the crystallization of TiO2 and successfully dope S and C on TiO2. The calcination temperature significantly affects the doping of S and C on TiO2, crystallization of TiO2, formation of hierarchically meso/nanoporous structure of TiO2 and its light absorption capability. The S- and C-codoped TiO2 exhibits high photocatalytic H2 generation efficiency in a water/methanol sacrificial reagent system under the irradiation of UV light. The high photocatalytic efficiency is dependent on the comprehensively competing effects of the codoping of S and C, crystallization, specific surface area and light absorption capability. The S- and C-codoped TiO2 calcined at 600°C demonstrates the highest photocatalytic H2 generation efficiency, which is ascribed to the balanced synergy of the abovementioned factors. [Copyright &y& Elsevier]

Abstract: The effect of fabrication method on the properties of hierarchical 3D TiO2 nanostructures was investigated by employing and developing both hydrothermal method and calcination method to synthesize hierarchical 3D TiO2 nanorod spheres in this study. A comprehensive comparison in terms of morphologies, crystallization, specific surface areas, light absorption capabilities, and photoluminescence spectrum was conducted between 3D TiO2 nanorod spheres synthesized via hydrothermal method and that synthesized via calcination method. A better photocatalytic activity was demonstrated over the TiO2 nanorod spheres synthesized through calcination method. This was ascribed to the better crystallization and monodispersion of the hierarchical 3D TiO2 nanorod spheres resulted from the calcination method; thus rendering it with more superior characteristics such as larger specific surface area, enhanced light absorption capability and faster transfer of electrons which suppress the recombination of photogenerated electrons and holes. This study is thus significant not only in promoting the development of hierarchical 3D TiO2 nanorod spheres via different methods, but also in revealing the effect of fabrication method on the photocatalytic activity of hierarchical 3D TiO2 nanorod spheres. The calcination method is proposed to be a facile and promising method for scale-up production of the hierarchical 3D TiO2 nanorod spheres with high photocatalytic activity for efficient pollutants degradation. [Copyright &y& Elsevier]

Abstract: One-dimensional mesoporous TiO2 nanotube (TNT) with large specific surface area was successfully fabricated, and employed in removal of Acid Orange 7 (AO7) via adsorption and heterogeneous photocatalysis. As compared to its precursor, P25 (Degussa), TNT exhibited superior adsorption ability and photocatalytic activity. It was found that the amount of adsorbed dye over TNT surface was critical to the photodegradation efficiency of AO7, and adsorption was further controlled by solution pH and co-existing ions. With an increase in pH, adsorption of AO7 decreased rapidly, and adsorption behavior transformed from monolayer adsorption to asymmetric physisorption. Under low pH conditions, multivalent anions in high concentrations severely limited AO7 adsorption on TNT; whereas the increase of pH led to a less severe inhibition of the adsorption. On the other hand, multivalent cations seem to facilitate adsorption, regardless of pH conditions. Adsorption mechanism and photodegradation kinetics of AO7 on TNT were also discussed in the paper in view of paving the way for efficient dye wastewater treatment with the application of TNT photocatalyst. [Copyright &y& Elsevier]