Search

Microalgae have been reported to be excellent producers of bioactive molecules. Lutein is a pigment reported to have various beneficial effects for humans, and especially for eye well-being. In the current review, we summarize various methods that have been developed to optimize its extraction and bioactivities reported for human health. Several protective effects have been reported for lutein, including antioxidant, anticancer, anti-inflammatory, and cardioprotective activity. This review also reports attempts to increase lutein production by microalgae by changing culturing parameters or by using pilot-scale systems. Genetic engineering lutein production is also discussed. Considering the increasing aging of the worldwide population will create an increased need for lutein, a viable economic and eco-sustainable method to produce lutein is needed to face this market demand.

As the periodic emission of light pulses by light emitting diodes (LEDs) is known to stimulate growth or induce high value biocompounds in microalgae, this flashing light regime was tested on growth and biochemical composition of the microalgae Nannochloropsis gaditana, Koliella antarctica and Tetraselmis chui. At low flashing light frequencies (e.g., 5 and 50 Hz, Duty cycle = 0.05), a strain-dependent growth inhibition and an accumulation of protein, polyunsaturated fatty acids, chlorophyll or carotenoids (lutein, β-carotene, violaxanthin and neoxanthin) was observed. In addition, a 4-day application of low-frequency flashing light to concentrated cultures increased productivities of eicosapentaenoic acid (EPA) and specific carotenoids up to three-fold compared to continuous or high frequency flashing light (500 Hz, Duty cycle = 0.05). Therefore, applying low-frequency flashing light as finishing step in industrial production can increase protein, polyunsaturated fatty acids or pigment contents in biomass, leading to high-value algal products., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Microalgae are photosynthetic microorganisms which may be employed in several fields. Amongst them, an emerging but promising sector of application is their usage for the remediation of wastewaters. They result particularly effective in treating municipal wastewaters, often resulting in nitrate concentrations exceeding the requirements for discharging treated wastewater into the sea. Furthermore, another advantage of using microalgae in civil wastewater treatment is the cooperation with heterotrophic bacteria which may naturally occur in the water or be introduced through sewage sludge in wastewater treatment plants (WTPs). Microalgae, in fact, produce oxygen which may be used by these bacteria reducing the overall operational costs of the WTP. The assessment of nitrogen compound concentrations in wastewater involves various techniques, with ionic chromatography (IC) and spectrometric methods being commonly used in laboratory settings. However, these methods have drawbacks such as the need for skilled personnel, time-consuming processes, and impracticality for in situ and real-time analysis. To address these issues, electrochemical sensors present a viable alternative. These sensors require portable instruments with low power requirements and can be miniaturized using nanotechnology. Electrochemical sensors operate by reducing/oxidizing the target analyte on the working electrode surface. The choice of electrode material is crucial for sensor sensitivity, and copper is found to exhibit excellent electrocatalytic properties for reducing nitrate ions in acidic media. In this study, a cost-effective electrochemical sensor made of copper was developed for quantifying nitrate in wastewater. The entire electrochemical cell was constructed from a common substrate used in Printed Circuit Boards (PCB). The whole fabrication procedure was optimized in order to obtain a reproducible fabrication procedure. The reference and counter electrodes were modified with graphite and Ag/AgCl paste, respectively. The results demonstrated that the sensor can effectively quantify nitrate ions in wastewater. Moreover, it can be employed during microalgal treatment to assess the in vivo reduction of nitrate, offering a practical and efficient solution for real-time monitoring of nitrogen compounds in wastewater treatment processes. [ABSTRACT FROM AUTHOR]

As known, microalgae are an appealing source of chemicals and high-value compounds which find application in nutraceuticals, cosmetics and pharmaceutics. Fatty acids (FA), in particular, have drawn attention to the possibility of employing them as a source of biodiesel alternatively to fossil fuels. In addition, several lipid derivatives have been found in microalgae and may be employed in several biotechnological applications. Hydroxy fatty acids can be substrates for several industrial applications thanks to their functionalization, which increases their reactivity and, for this reason, can be used as functional building blocks to produce a multitude of bio-based materials. Recently, a promising method for the chemical modification of unsaturated-FAs (U-FA) has appeared. In fact, U-FA may be modified by members of the hydratase enzyme family to produce saturated and unsaturated hydroxy fatty acids with high stereo- and regio-selectivity. These enzymes are able to introduce a water molecule to the double bond present in the free fatty acids (FFA) Oleic Acid (OA), Linoleic Acid (LA), producing 10-hydroxy fatty acids (10-hydroxy-FAs). Furthermore, the carbohydrate component of the microalgal biomass may be converted into furfuryl compounds and, in particular in 5-hydroxyl methyl furfural (5-HMF). This is one of the chemical bio-compound different from petroleum-derived ones with the highest added value and may be obtained through lignocellulosic biomasses or hexoses sugars through acid catalysis. It is defined platform molecule because it is the precursor of several compounds for the chemical industry. In this work, we aimed to optimize a circular bioprocess by performing, starting from the same biomass, two different processes: the biotransformation of microalgal FFAs through the employment of a genetically modified E. coli on one side, and the conversion of the remaining biomass in furfuryl products. The first process allowed the production of very interesting lipid derivatives with biotechnological applications, including 10 hydroxy-stearic acid and 10-hydroxy-octadecenoic acid. The second process was obtained through heterogeneous catalysis based on niobium phosphate. This procedure represents a high-innovative application of microalgal biomass and allows the simultaneous exploitation of FAs and carbohydrates. This may result in an increase in the commercial value of microalgal biomass. [ABSTRACT FROM AUTHOR]

As well known, microalgae are eukaryotic or procaryotic microorganisms able to photosynthesize, namely transforming inorganic substrates and sun light into organic compounds and chemical energy. They result very promising in treating civil wastewaters thanks to their ability to employ nitrates and phosphates as nutrients (Lima et al., 2019). Autotrophic microalgae are, anyway, not useful in decreasing the organic carbon content of wastewaters, and for this reason, they cooperate with heterotrophic bacteria. The usefulness of microalgae- bacteria consortia in treating wastewaters and the ratio of their inoculum was investigated in a previous work (Lima, 2022a). Contrarily to autotrophic microalgae, mixotrophic microalgae are able to decrease the organic content of the matrix in which they are grown. In this work, we preliminarily investigated the capability of the autochthonous microalga Chlorella sp. CW2 to grow in mixotrophy and decrease the organic content of the artificial wastewater in which they are grown. Several batch cultivations were performed with glucose in different concentrations. Kinetic parameters were obtained and employed to determine the dilution rate (D) ideal for the abatement of glucose from the artificial wastewater. [ABSTRACT FROM AUTHOR]

Microalgae are photosynthetic microorganisms that can employ some inorganic pollutant compounds as nutrients, for example nitrates and phosphates. Traditional wastewater treatment comprises oxidation ponds in which the Activated Sludge performs the oxidation of the organic matter. Microalgae may be well applied in these processes. In this work, we tested the potential of remediation of a mixture of a local microalga, Chlorella sp. Pozzillo, and activated sludge and compared it to controls of only microalga and only activated sludge. We found that the mixture of bacteria and microalgae leads to an improvement in nitrogen removal up to the 83,68%, while phosphorous removal is improved when the autochthonous microalgae are used alone. The abatement of the Chemical Oxygen Demand was of 59,17% when using the microalgae and activated sludge consortium, while it was higher (-76,67%±0) when using the only activated sludge. The biomass was also analysed for its content in lipids and carbohydrates. This information may be useful to assess the best industrial application for the biomass obtained from civil wastewaters remediation process, in accordance with principles of circular economy and waste-to-resources view. [ABSTRACT FROM AUTHOR]

Microalgae are unicellular and photosynthetic microorganisms which grow thanks to inorganic salts, CO2 and light, and find applications in several fields thanks to their variety. The industrial application of microalgae has not often been fully exploited because of a lack of information about how microalgae respond to inputs and to different growth environments. In the present work a model able to predict the microalgae growth in reactors with different geometries was developed. We combined a Monod-like model for the specific growth rate with the Lambert-Beer law of homogeneous light distribution in thick photobioreactors. Kinetic parameters related to the cultivation of the microalga Nannochloropsis gaditana were obtained, for the first time through batch cultivation under different photon flux densities inside a quasi-isoactinic photobioreactor, in order to obtain a practically homogeneous light distribution. The maximum specific growth rate and saturation constant resulted, respectively as µmax = 0.0256 h−1 and Ik = 15.28 µE s−1m−2. These parameters were applied to the model to obtain data on microalgae growth in different geometries. Model simulation results are presented and discussed. Furthermore, biochemical analysis was performed on the biomass obtained at the end of each batch cultivation, grown both under different light intensities and in reactors with different configurations. Results indicated that lipid content increases with increasing average photon flux density. The fatty acid and carotenoids profiles markedly shift when the average light intensity varies: the PUFA content decreases and the SFA content increases when the average light intensity rises, and an accumulation of carotenoids at lower photon flux densities is observed. In conclusion, the model resulted in a useful tool, able to predict the growth of the microalga Nannochloropsis gaditana in reactors with different configurations. [ABSTRACT FROM AUTHOR]

The green microalga Haematococcus pluvialis accumulates astaxanthin, a potent antioxidant pigment, as a defense mechanism against environmental stresses. In this study, we investigated the technical feasibility of a stress-based method for inducing astaxanthin biosynthesis in H. pluvialis using electric stimulation in a two-chamber bioelectrochemical system. When a cathodic (reduction) current of 3 mA (voltage: 2 V) was applied to H. pluvialis cells for two days, considerable lysis and breakage of algal cells were observed, possibly owing to the formation of excess reactive oxygen species at the cathode. Conversely, in the absence of cell breakage, the application of anodic (oxidation) current effectively stimulated astaxanthin biosynthesis at a voltage range of 2–6 V, whereas the same could not be induced in the untreated control. At an optimal voltage of 4 V (anodic current: 30 mA), the astaxanthin content in the cells electro-treated for 2 h was 36.9% higher than that in untreated cells. Our findings suggest that electric treatment can be used to improve astaxanthin production in H. pluvialis culture if bioelectrochemical parameters, such as electric strength and duration, are regulated properly. [ABSTRACT FROM AUTHOR]

Increasing energy needs have led to soaring fossil fuel consumption, which has caused several environmental problems. These environmental aspects along with the energy demand have motivated the search for new energy systems. In this context, biofuels such as biodiesel have been developing into a substitute for conventional fuels. Microalgae are considered a promising option for biodiesel production due to their high lipid content. Therefore, it is important to analyze the technical aspects of the biodiesel production system. In this work, the inherent safety analysis of three emerging topologies for biodiesel production from microalgae was performed using the inherent safety index (ISI) methodology. Selected topologies include biodiesel production via lipid extraction and transesterification, in-situ transesterification, and hydrothermal liquefaction (HTL). The results revealed that the processes are inherently unsafe achieving total inherent safety index scores of 30, 29, and 36. The main risks in the cases were associated with the chemical safety index. Operating conditions represented no risk for topologies 1 and 2, while for topology 3 pressure and temperature were identified as critical variables. In general, topology 2 showed better performance from a safety perspective. [ABSTRACT FROM AUTHOR]

The need to reduce the costs associated with microalgae cultivation encouraged scientific research into coupling this process with wastewater treatment. Thus, the aim of this work was to assess the growth of Chlorella vulgaris (Chlorophyta) in different effluents from a municipal wastewater treatment plant (WWTP), namely secondary effluent (SE) and sludge run-off (SR). Assays were performed, under the same conditions, in triplicate with 4 dilution ratios of the wastewaters (25%, 50%, 75% and 100%) with the standard culture medium bold basal medium double nitrated (BBM2N) as a control. The capability of C. vulgaris for biomass production, chlorophyll synthesis and nutrients removal in the SE and SR was evaluated. The 25% SE and 25% SR showed increased specific growth rates (0.47 and 0.55 day−1, respectively) and higher biomass yields (8.64 × 107 and 1.95 × 107 cells/mL, respectively). Regarding the chlorophyll content, the 100% SR promoted the highest concentration of this pigment (2378 µg/L). This green microalga was also able to remove 94.8% of total phosphorus of SE, while in 50% SR, 31.2% was removed. Removal of 73.9% and 65.9% of total nitrogen in 50% and 100% SR, respectively, was also observed. C. vulgaris growth can, therefore, be maximized with the addition of municipal effluents, to optimize biomass production, while cleansing the effluents. [ABSTRACT FROM AUTHOR]

Microalgae are microorganisms able to photosynthesize, namely transforming inorganic substrates and sun light into organic compounds and chemical energy. The industry of microalgae has expanded in the last decades and several applications are now developed, making their biomass interesting under an economic perspective. Nannochlopsis gaditana is one of the most interesting species already employed in industry because of its high content in lipids that could be employed as source for biodiesel synthesis but also in other fields such as cosmetic and pharmaceutic. One of the most promising application is the exploitation of microalgal grow for bioremediating wastewaters polluted with inorganic nutrients such as nitrates and phosphates that microalgae are able to employ as nutrients. Bio-treatment of wastewaters by using microalgae has the advantage to reclassify the water and preserve it from wasting while producing a valuable biomass. In this work, a microalgal strain, Nannochloropsis gaditana, was employed for testing its performance in the bioremediation of municipal sewages. The wastewater was taken from a municipal plant, after the primary treatment, and the algae processing was aimed at replacing the secondary treatment. Algal growth in its growth medium and in the sewage was compared and algal biomass was characterized. Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD), total nitrogen and total phosphorous levels of the sewage before and after algae treatment were also determined in order to evaluate the efficiency of this microalgal strain on wastewater bioremediation. Our results showed that N. gaditana grows better in wastewater than in the control growth medium and it is able to efficiently remove nutrients from the sewage. However, COD and BOD values did not decrease after algal treatment. These results suggest that the use of selected bacteria and/or yeast strains (together with microalgae) could improve the efficiency of wastewater treatments decreasing BOD and COD values. [ABSTRACT FROM AUTHOR]

[Display omitted] • Valorisation of recalcitrant Chlorella biomass in 5-HMF was performed in two steps. • The conversion of hexoses was optimised in the presence of niobium-based catalysts. • Process optimisation occurred through DoE and reactive extraction. • An overall yield to 5-HMF of 29% on total sugars was obtained. The valorisation of recalcitrant Chlorella sp. microalgal biomass by the extraction of the sugar content and its conversion into 5-hydroxymethyl furfural (5-HMF) has been carried out in two-steps. In the first step, a pre-treatment of the biomass was optimized to obtain, by sonication and hydrothermal treatments also in the presence of acetic acid and SiO 2 pellets, the maximum release of carbohydrate and their hydrolysis to monosaccharides. The second step, carried out under hydrothermal conditions, was devoted to the heterogeneous catalytic isomerisation/dehydration of the monosaccharides (essentially glucose and fructose) released from algae in the first reaction step to yield 5-HMF in presence of two commercial samples of niobium-based catalysts that were characterized with several techniques like specific surface area and superficial acidity measurements, SEM, HRTEM, EDX, FTIR and Raman. Other important features of the two catalysts are largely present in the literature due to the fact that they are commercial materials. The isomerisation/dehydration reactions of the monosaccharides proceed through a tandem pathway involving the Lewis and Brønsted acid sites provided by the surface of the acidic solids giving rise to the isomerization of glucose to fructose, followed by dehydration of fructose to 5-HMF. The optimisation of the reaction conditions was carried out in the presence of Nb 2 O 5 by using a Design of Experiment (DoE) approach. The optimised parameters were identified as temperature 210 °C and 4.45 h of reaction time, providing a yield to 5-HMF of about 18% on the total sugars contained in the algae. A further optimisation has been achieved in the presence of NbOPO 4 instead of Nb 2 O 5, which still led to 21% yield to 5-HMF on the total sugars. Moreover, using an H 2 O/MIBK system, a reactive extraction was performed, obtaining the very good value of yield to 5-HMF of 29% on total sugars. In this way, a multi-approach process optimisation was performed, in line with the principles of process intensification, with the aim of improving the energy-efficiency of the entire process. [ABSTRACT FROM AUTHOR]

The supercritical water gasification of Nannochloropsis gaditana microalgae has been studied in term of process development at 24 MPa and 663 °C. Gasification has been investigated using a 200 cm 3 down flow reactor working continuously. The effect of microalgae slurry concentration, with or without alkali catalysts, was studied. Moreover, the role played by different constituents of microalgae on gasification was investigated. Particularly, gasification of amino acids, carbohydrates and model mixtures among them was studied. Nannochloropsis gaditana was successfully gasified up to 97.4 wt% as gasification efficiency and 86.0 wt% as carbon efficiency. The product gas is mainly composed of hydrogen (52.0%), methane (17.9%) and CO 2 (23.0%). Gasification of pure amino acids, which are the main components of microalgae, showed a very different resistance to gasification depending on the molecular structure of the molecules. Among the amino acid that have been studied in this work, gasification resistance is in the order glycine > leucine > glutamic acid, whereas CH 4 concentration increases in order leucine > glutamic acid > glycine due to the number of methyl groups that are present in the molecules. From this work it can be concluded that gasification of microalgae is feasible in a continuous mode and that, depending on their molecular structure, amino acids offer a different resistance to gasification. These results can be of help in evaluating the feasibility of gasification of defatted microalgae after extraction of the oil. [ABSTRACT FROM AUTHOR]