Search

This study aims to propose a biological system that allows for direct utilization of flue gas for carbon dioxide capture and utilization by microalgae. The strain Chlorella sp. ABC-001 is employed for its high growth rate as well as lipid and carbohydrate content. Toxicity tests showed that cell growth was unaffected by NO, but the presence of SO 2 showed critical damage on cell growth. Hence, an extremophile alga, Galdieria sulphuraria 5587.1 was applied to build a dual-strain cultivation system to mitigate the effect of SO 2 toxicity and increase CO 2 capture efficiency. All SO 2 was removed by Galdieria culture and the system exhibited stable growth from a simulated flue gas stream containing CO 2 , NO and SO 2 . Combined CO 2 biofixation rate of 793 mg/L/d and lipid productivity of 113 mg/L/d was achieved. The results showed that this new cultivation system is a promising alternative for reducing CO 2 emissions from power plants., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Microalgae have been studied and tested for over 70 years. However, biodiesel, the prime target of the algal industry, has suffered from low competitiveness and current steps toward banning the internal combustion engine all over the world. Meanwhile, interest in reducing CO 2 emissions has grown as the world has witnessed disasters caused by global warming. In this situation, in order to maximize the benefits of the microalgal industry and surmount current limitations, new breakthroughs are being sought. First, drop-in fuel, mandatory for the aviation and maritime industries, has been discussed as a new product. Second, methods to secure stable and feasible outdoor cultivation focusing on CO 2 sequestration were investigated. Lastly, the need for an integrated refinery process to simultaneously produce multiple products has been discussed. While the merits of microalgae industry remain valid, further investigations into these new frontiers would put algal industry at the core of future bio-based economy., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Microalgae accumulate abundant lipids and are a promising source for biodiesel. However, carbohydrates account for 40% of microalgal biomass, an important consideration when using them for the economically feasible production of biodiesel. In this study, different acid hydrolysis and post-treatment processing of Chlorella sp. ABC-001 was performed, and the effect of these different hydrolysates on bioethanol yield by Saccharomyces cerevisiae KL17 was evaluated. For hydrolysis using H 2 SO 4 , the neutralization using Ca(OH) 2 led to a higher yield (0.43 g ethanol/g sugars) than NaOH (0.27 g ethanol/g sugars). Application of electrodialysis to the H 2 SO 4  + NaOH hydrolysate increased the yield to 0.35 g ethanol/g sugars, and K + supplementation further enhanced the yield to 0.41 g ethanol/g sugars. Hydrolysis using HNO 3 led to the generation of reactive species. Neutralization using only NaOH yielded 0.02 g ethanol/g sugars, and electrodialysis provided only a slight enhancement (0.06 g ethanol/g sugars). However, lowering the levels of reactive species further increased the yield to 0.25 g ethanol/g sugars, and K + supplementation increased the yield to 0.35 g ethanol/g sugars. Overall, hydrolysis using H 2 SO 4  + Ca(OH) 2 provided the highest ethanol yield, and the yield was almost same as from conventional medium. This research emphasizes the importance of post-treatment processing that is modified for the species or strains used for bioethanol fermentation.

The use of microalgal biomass as feedstock for biofuels has been discussed for decades as it provides a sustainable approach to producing fuels for the future. Nonetheless, its feasibility has not been established yet and various aspects of biomass applications such as CO 2 biofixation should also be explored. Therefore, in this study, the CO 2 biofixation and lipid/carbohydrate production potential of Chlorella sp. ABC-001 were examined under various nitrogen concentrations. The highest biomass productivity and CO 2 biofixation rate of 0.422 g/l/d and 0.683 g/l/d, respectively, were achieved under a nitrogen-rich condition (15 mM nitrate). Carbohydrate content was generally proportional to initial nitrate concentration and showed the highest value of 41.5% with 15 mM. However, lipid content showed an inverse relationship with nitrogen supplementation and showed the highest value of 47.4% with 2.5 mM. In consideration as feedstock for biofuels (bioethanol, biodiesel, and biogas), the sum of carbohydrate and lipid contents were examined and the highest value of 79.6% was achieved under low nitrogen condition (2.5 mM). For lipid-based biofuel production, low nitrogen supplementation should be pursued. However, considering the lower feasibility of biodiesel, pursuing CO 2 biofixation and the production of carbohydrate-based fuels under nitrogenrich condition might be more rational. Thus, nitrogen status as a cultivation strategy must be optimized according to the objective, and this was confirmed with the promising alga Chlorella sp. ABC-001.

The heterotrophic cultivation of microalgae has a number of notable advantages, which include allowing high culture density levels as well as enabling the production of biomass in consistent and predictable quantities. In this study, the full potential of Chlorella sp. HS2 is explored through optimization of the parameters for its heterotrophic cultivation. First, carbon and nitrogen sources were screened in PhotobioBox. Initial screening using the Plackett-Burman design (PBD) was then adopted and the concentrations of the major nutrients (glucose, sodium nitrate, and dipotassium phosphate) were optimized via response surface methodology (RSM) with a central composite design (CCD). Upon validation of the model via flask-scale cultivation, the optimized BG11 medium was found to result in a three-fold improvement in biomass amounts, from 5.85 to 18.13 g/L, in comparison to a non-optimized BG11 medium containing 72 g/L glucose. Scaling up the cultivation to a 5-L fermenter resulted in a greatly improved biomass concentration of 35.3 g/L owing to more efficient oxygenation of the culture. In addition, phosphorus feeding fermentation was employed in an effort to address early depletion of phosphate, and a maximum biomass concentration of 42.95 g/L was achieved, with biomass productivity of 5.37 g/L/D.

Ecological studies of microalgae have revealed their potential to co-exist in the natural environment. It provides an evidence of the symbiotic relationship of microalgae with other microorganisms. The symbiosis potential of microalgae is inherited with distinct advantages, providing a venue for their scale-up applications. The deployment of large-scale microalgae applications is limited due to the technical challenges such as slow growth rate, low metabolites yield, and high risk of biomass contamination by unwanted bacteria. However, these challenges can be overcome by exploring symbiotic potential of microalgae. In a symbiotic system, photosynthetic microalgae co-exist with bacteria, fungi, as well as heterotrophic microalgae. In this consortium, they can exchange nutrients and metabolites, transfer gene, and interact with each other through complex metabolic mechanism. Microalgae in this system, termed as a binary culture, are reported to exhibit high growth rate, enhanced bio-flocculation, and biochemical productivity without experiencing contamination. Binary culture also offers interesting applications in other biotechnological processes including bioremediation, wastewater treatment, and production of high-value metabolites. The focus of the study is to provide a perspective to enhance the understanding about microalgae binary culture. In this review, the mechanism of binary culture, its potential, and limitations are briefly discussed. A number of queries are evolved through this study, which needs to be answered by executing future research to assess the real potential of binary culture., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Cultivation is the most expensive step in the production of biodiesel from microalgae, and substantial research has been devoted to developing more cost-effective cultivation methods. Plant hormones (phytohormones) are chemical messengers that regulate various aspects of growth and development and are typically active at very low concentrations. In this study, we investigated the effect of different phytohormones on microalgal growth and biodiesel production in Chlamydomonas reinhardtii and their potential to lower the overall cost of commercial biofuel production. The results indicated that all five of the tested phytohormones (indole-3-acetic acid, gibberellic acid, kinetin, 1-triacontanol, and abscisic acid) promoted microalgal growth. In particular, hormone treatment increased biomass production by 54 to 69 % relative to the control growth medium (Tris-acetate-phosphate, TAP). Phytohormone treatments also affected microalgal cell morphology but had no effect on the yields of fatty acid methyl esters (FAMEs) as a percent of biomass. We also tested the effect of these phytohormones on microalgal growth in nitrogen-limited media by supplementation in the early stationary phase. Maximum cell densities after addition of phytohormones were higher than in TAP medium, even when the nitrogen source was reduced to 40 % of that in TAP medium. Taken together, our results indicate that phytohormones significantly increased microalgal growth, particularly in nitrogen-limited media, and have potential for use in the development of efficient microalgal cultivation for biofuel production.

As energy and environment have become urgent issues, there has been increasing needs to develop alternative energy source, such as microalgal bio-fuel. In this study, we investigated the growth and lipid contents of microalgae Nannochloris oculata under various environmental conditions for biodiesel production. Our results indicated that biomass productivities of N. oculata were correlated with increasing nitrogen concentrations up to 37.5 ppm. High irradiance using 230-250 μmol/m(2) led to higher biomass yields than low irradiance of 160-180 μmol/m(2). Biomass productivities increased further by manipulating surface to volume ratio (S/V), which in turn enhanced light penetration. Finally, optimal biomass productivities (1.04 g/l day) could be achieved by the supplementation of yeast extract. Lipid contents and fatty acid profiles of N. oculata were affected by the different growth conditions. Lipid contents of N. oculata decreased as nitrogen concentration increased. Lower temperature (15 °C) resulted in higher lipid content than higher temperature (25 °C). Fatty acid profiles of N. oculata indicated that palmitic acid (C16:0) and linoleic acid (C18:2) were the two most abundant fatty acids, but the supplementation of yeast extract increased linolenic acid (C18:3) content. Our results suggested the feasibility of N. oculata for the biodiesel production.

Sugar refinery washing water (SRWW) contains abundant levels of carbon sources and lower levels of contaminants than other types of wastewater, which makes it ideal for heterotrophic cultivation of microalgae. Here, carbon sources in SRWW were utilized for conversion into the form of value-added docosahexaenoic acid (DHA) using Aurantiochytrium sp. KRS101. Since SRWW is not a defined medium, serial optimizations were performed to maximize the biomass, lipid, and DHA yields by adjusting the nutrient (carbon, nitrogen, and phosphorus) concentrations as well as the application of salt stress. Optimum growth performance was achieved with 30% dilution of SRWW containing a total organic carbon of 95,488 mg L−1. Increasing the nutrient level in the medium by supplementation of 9 g L−1 KH2PO4 and 20 g L−1 yeast extract further improved the biomass yield by an additional 14%, albeit at the expense of a decrease in the lipid content. Maximum biomass, lipid, and DHA yields (22.9, 6.33, and 2.03 g L−1, respectively) were achieved when 35 g L−1 sea salt was applied on a stationary phase for osmotic stress. These results demonstrate the potential of carbon-rich sugar refinery washing water for DHA production using Aurantiochytrium sp. KRS101 and proper cultivation strategy. [ABSTRACT FROM AUTHOR]

Abstract: We measured the growth of and lipid production by the model microalga Chlamydomonas reinhardtii under different phototrophic, heterotrophic, and mixotrophic conditions to determine the optimal conditions for growth and biodiesel production. In particular, we examined cell growth and yield of fatty acid methyl esters (FAMEs) when C. reinhardtii was cultured in the presence of different organic carbon sources (acetate, glucose, glycerol, and sucrose). C. reinhardtii grew under various conditions, but mixotrophic cultivation was best. The greatest biomass production (2.15gL−1 in 5days) and FAME yield (16.41% of biomass) were observed under mixotrophic cultivation with acetate (10gL−1). As an alternative to acetate, we additionally tested the use of volatile fatty acids (VFAs; acetic, propionic, and butyric acids), which can be inexpensively produced through fermentation of food waste. The highest FAME yield (19.02% of biomass) and biomass production (2.05gL−1 in 5days) were obtained with 5gL−1 of VFAs. This result indicates that VFAs can serve as an inexpensive alternative carbon source for maximizing lipid production in mixotrophic cultivation of C. reinhardtii. [Copyright &y& Elsevier]

Abstract: High-cost downstream process is a major bottleneck for producing microalgal biodiesel at reasonable price. Conventional lipid extraction process necessitates biomass drying process, which requires substantial amount of energy. In this regard, lipid extraction from wet biomass must be an attractive solution. However, it is almost impossible to recover lipid directly from wet microalgae with current technology. In this study, we conceived osmotic shock treatment as a novel method to extract lipid efficiently. Osmotic shock treatment was applied directly to wet Chlamydomonas reinhardtii biomass with water content >99%, along with both polar and non-polar organic solvents. Our results demonstrated that osmotic shock could increase lipid recovery approximately 2 times. We also investigated whether the presence of cell wall or different cell stages could have any impact on lipid recovery. Cell wall-less mutant stains and senescent cell phase could display significantly increased lipid recovery. Taken together, our results suggested that osmotic shock is a promising technique for wet lipid extraction from microalgal biomass and successfully determined that specific manipulation of biomass in certain cell phase could enhance lipid recovery further. [Copyright &y& Elsevier]

Superior carbon fixation rate of microalgae compared to terrestrial biomass offers a significant opportunity to build a reliable carbon supply chain for carbon source. Extremophilic microalgae, Galdieria sulphuraria (G. sulphuraria), is further underscored by its exceptional adaptability to harsh environments such as wastewater. This study proposed a strategy to efficiently utilize carbon in G. sulphuraria and to valorise metallic industrial waste, particularly red mud (RM), through co-pyrolysis. To improve the eco-friendliness, CO 2 was used as a reactive gas medium in pyrolysis system. Use of CO 2 in single-stage pyrolysis of G. sulphuraria leads to the enhanced formation of CO through gas-phase reactions (GPRs) of it with volatile matter (VM). Specifically, CO 2 partially oxidize VM while reduce into CO. From single-stage co-pyrolysis of G. sulphuraria with RM, RM accelerated the reaction kinetics for GPRs between CO 2 and VM, leading to the increased formation of syngas from 27.5 to 37.6 mmol compared to N 2 environment. From multi-stage co-pyrolysis, an additional heat source (700 °C) facilitated the GPRs induced by CO 2 , increasing evolution syngas from 37.6 to 73.8 mmol compared to single-stage co-pyrolysis under CO 2 environment. RM‑carbon composites (RMCs) from co-pyrolysis of G. sulphuraria with RM under N 2 /CO 2 environments was utilized as a catalyst in thermally induced transesterification. Both RMCs exhibited superior performance over commercial silica. In specific, both RMCs resulted in higher biodiesel yields of >95.0 wt% at 300 °C, compared to commercial silica (biodiesel yield of 16.6 wt% at corresponding reaction temperature). Such performance of RMCs in thermally induced transesterification could be improved by the modification of their surface properties but its related study was not conducted in this stage. A series of experimental findings propose that co-pyrolysis of G. sulphuraria and RM creates opportunities to maximise syngas production and fabricate red mud‑carbon composites to enhance biodiesel conversion efficiency. [Display omitted] • Tolerance to harsh conditions makes Galdieria sulphuraria a reliable carbon source. • Co-pyrolysis of microalgae and red mud waste produces iron-carbon composite. • CO 2 -assisted pyrolysis improves CO formation, promoting syngas production. • Iron-carbon composite catalyzes in thermally induced transesterification reaction. [ABSTRACT FROM AUTHOR]