Search

In this paper, a dual-polarized Huygens unit is proposed, which has a double-layer metallic pattern etched on both sides of one dielectric substrate. Induced magnetism enables the structure to support Huygens' resonance, thus obtaining nearly complete available transmission phase coverage. By optimizing the structural parameters, a better transmission performance can be achieved. When the Huygens metasurface was used for the design of a meta-lens, good radiation performance was exhibited, with a maximum gain of 31.15 dBi at 28 GHz, an aperture efficiency of 42.7% and a 3 dB gain bandwidth of 26.4 GHz to 30 GHz (12.86%). Due to its excellent radiation performance and very simple fabrication, this Huygens meta-lens has important applications in millimeter-wave communication systems. [ABSTRACT FROM AUTHOR]

In this paper, a polarization-independent chain Huygens' metasurface is proposed. It is polarization multiplexing of two chain structures. Owing to the polarization-independent property, it can be conveniently applied to design double-layer dual-polarized transmitarray antennas (TAAs) with low profile. The measured results show that, for the designed low-profile dual-polarized TAA, its peak gain is 29.7 dBi at 28 GHz with aperture efficiency of 48.9 %, and the 3-dB gain bandwidths is 8.8 %. With the F/D ratio of only 0.36, the proposed low-profile dual-polarized TAA based on the chain Huygens' metasurface has critical applications in antenna engineering. [ABSTRACT FROM AUTHOR]

A Huygens’ metasurface with unit cells of glide symmetric I-shape metal strips is proposed for a high-efficiency metalens antenna. The proposed unit cell achieves more than 98.6% transmission amplitude with 360° phase shift coverage for dual polarization. The mechanism is presented by analyzing a unit cell with two dislocated I-shape metal strips, where the electric dipole and magnetic dipole resonances are tuned by the dislocation. The analysis implies that glide symmetric I-shape metal strips are preferable for high transmittance Huygens’ unit cell design. With the proposed Huygens’ unit cell, a high-efficiency metalens antenna is realized. The simulated and measured results show that the proposed metalens antenna of a 14-wavelength diameter achieves a maximum gain of 30.7 dBi at 27.2 GHz, which is only 1.1 dB lower than its theoretical limit. The maximum antenna efficiency is 61.5%. The 3-dB bandwidth of achieved gain ranges from 25.9 to 29 GHz, covering the fifth generation (5G) millimeter-wave bands. The proposed metalens remarkably enhances the radiation performance of the metalens antennas. [ABSTRACT FROM AUTHOR]

A double-layered Huygens’ unit cell is proposed to design a broadband metasurface lens (meta-lens) for 5G millimeter-wave antennas. The Huygens’ unit cell consists of a pair of antisymmetric conducting semicircle arc elements on both surfaces of a thin dielectric substrate. The surface currents flowing at the opposite directions on both conducting elements form an electric current loop to induce the orthogonal magnetic current, and then the Huygens’ resonances are stimulated. The Huygens’ unit cell provides the transmission phase coverage of over 400° with transmission amplitude better than −2.3 dB. This breaks through the phase shift limitation of a conventional double-layer frequency-selective surface (FSS) element. It shows that induced magnetism makes such a Huygens-based meta-lens very compact with only one printed circuit board. As an example, a double-layered meta-lens on a 1.5 mm-thick dielectric substrate is designed and experimentally verified. The meta-lens antenna achieves the measured peak gain of 30.7 dBi at 26.2 GHz with an aperture efficiency of 42.25% over the 3 dB bandwidth of 15.7% from 24.1 to 28.2 GHz, fully covering the proposed 5G spectrum from 24.25 to 27.5 GHz. This proposed method greatly helps in the application of promoting planar lightweight low-cost broadband lens antennas in the coming 5G systems. [ABSTRACT FROM AUTHOR]