Search

A widespread usage of aluminum alloys for the fabrication of car-body parts is conditional on the employment of appropriate welding methods, especially if dissimilar welding must be performed with automotive steel grades. Dissimilar welding of aluminum alloys and steel grades poses some issues concerning the formation of brittle intermetallic compounds, difference in physical and chemical properties of the parent metals, and poor wetting behavior of aluminum. Friction stir welding is considered to be a reasonable solution to obtain sound aluminum/steel joints. A study on the join quality of dissimilar lap joints of steel and aluminum alloy sheets after friction stir welding is proposed here. A low carbon steel is joined with AA6016 aluminum alloy to study preliminarily the feasibility to assembly car-body parts. The joints, welded with tool rotation and feed rate varying in a wide range, have been studied from a visual examination and microstructural point of view. Optical microscopy has been used to characterize the microstructure of the examined sheets in as-received and welded conditions. Micro-hardness measurements have been carried out to quantitatively analyze the local hardness of the welded joints. Set welding process parameters are identified to assemble without the presence of macroscopic defects the examined steel and aluminum welded parts.

Ultrafine grained (UFG) materials are of great potential in industry due to their enhanced mechanical strength and other promising features, such as ability to superplastic deformation or excellent corrosion resistance. Nevertheless, one of the main limitations lies in their low thermal stability, which leads to excessive grain growth at elevated temperature. It influences mainly further processes performed at high temperature, such as joining. It causes detrimental problems during conventional fusion welding, as significant grain growth is observed and therefore the advantages as a result of small average grain size disappear. Therefore, the idea of applying solid state joining process seems to be suitable for UFG materials. Among the group of solid state welding processes there are methods based on friction. One of these methods, which is suitable for samples in the form of rectangular bars, is linear friction welding (LFW). Present study is the first comprehensive work describing the results of UFG aluminium welded using LFW method with additional emphasis put on a position of shear planes of welded samples. The results have shown, that UFG regime has not been preserved in a weld zone. Welding of UFG sample with an average grain size of 1 μm resulted in a grain growth in weld zone to 1.6−2 μm. Chosen parameters allowed to weld samples only locally, nevertheless, results from tensile tests performed on mini samples showed a great potential of the LFW method for joining UFG samples. The tensile strength of welds was in the range of 83–90 % of initial material.

In the last decades, new flexible manufacturing processes have been developed to face the demands, by many industrial fields, for highly customized complex functional parts. The peculiar design of these components often overcomes conventional sheet metal and bulk metal forming processes capabilities. In order to face this issue, new hybrid techniques, capable of exploit key advantages of different processes, have to be developed. In this study, a method to obtain sheet-bulk joints, based on the Linear Friction Welding process, is proposed. The feasibility of the technique was investigated through an experimental campaign carried out with varying pressure and oscillation frequency using AA6082-T6 aluminum alloy. The main mechanical and metallurgical properties of the produced joints, including typical material flow defects, were highlighted. It was found that sound hybrid sheet-bulk joints can be produced by the proposed approach. Finally, it was highlighted how the height of the weld center zone plays a key role on the mechanical properties of the produced joints.

Conventional metal chips recycling processes are energy-intensive with low efficiency and permanent material losses during re-melting. Solid state recycling allows direct recycling of metal scraps into semi-finished products. It is expected that this process category would lower the environmental performance of metals recycling. Friction Stir Consolidation is a new solid-state technique taking advantage of friction heat generation and severe plastic deformation to consolidate chips into billets. In this research, the feasibility of Friction Stir Consolidation as aluminum chips recycling process is analyzed. Specifically, an experimental campaign has been carried out with varying main process parameters. Three main aspects have been evaluated in order to highlight products quality and environmental impact of the process: (i) metallurgical and mechanical properties of the consolidated products; (ii) primary energy demand, as compared to conventional processes; (iii) forgeability of the consolidated products, as compared to parent material. Results revealed that a proper process parameters selection results in fully consolidated aluminum disk with satisfactory mechanical properties. Also, the new recycling strategy allows substantial energy savings with respect the conventional (remelting based) route.

Friction Stir Processing (FSP) has been demonstrated feasible to create local Metal Matrix Composites (MMCs) in light alloys matrix. In this research, local MMCs were produced contextually to the weld using Friction Stir Welding (FSW). SiC particles were added to AA7075 lap joints by creating a proper groove on the top surface of the bottom sheet. Different welds were produced with increasing number of tool passes. The effect of the multiple passes was investigated through shear tests, macro and micro observations, average grain size and microhardness measurements. The welded joints were compared to a reference weld produced with no reinforcements. It was found that poor mixing between matrix and reinforcement phase is obtained with one tool pass. On the contrary, proper mixing is obtained with three tool passes, resulting in an increase in the maximum load in shear tests of 50% with respect to the reference conditions.

In the last decades, several direct-recycling techniques have been developed and investigated in order to avoid material remelting, typical of the conventional aluminum alloys recycling processes. Moreover, the remelting step for aluminum recycling is affected by permanent material losses. Solid-state recycling processes have proven to be a suitable strategy to face such issues. Friction Consolidation is an innovative solid state-recycling technology developed for metal chips. During the process, a rotating die is plunged into a hollow chamber containing the material to be processed. The work of friction forces decaying into heat soften the material and, together with the stirring action of the die, enable solid bonding phenomena producing a consolidated metal disc. This technology has been successively applied to metal chips; in this paper, the feasibility of the process to recycle sheet metal scrap is investigated. The quality of the obtained billets is evaluated through morphological observation and hardness measurements.

This paper presents the results of an experimental and numerical campaign on Linear Friction Welding of dissimilar AA2011-T8 and AA6082-T6 aluminum alloys. Experimental tests were carried out with constant oscillation amplitude and process time. Varying oscillation frequency, interface pressure, specimen geometry and mutual position were used. Grain size measurements, HV tests and EDX analysis were considered to characterize the microstructure of the joints as a function of the input process parameters. A thermal numerical model was utilized to predict the temperature profiles in the joints during the process. The obtained results allowed the identification of four weld categories: sound joints, “bonding limit” condition and two different unwelded joints. The investigation of the causes of the different joint behavior permitted to obtain a few design guidelines on the LFW of dissimilar alloys with different geometry.

Two different in-process control strategies were developed and compared with the aim to produce AZ31 magnesium alloy joints by friction stir welding on sheet blanks with a non-uniform thickness. To this purpose, sheets with dip or hump zones were welded by either changing the rotational speed or the tool plunging in order to keep constant the value of the vertical force occurring during the welding stage of the process. The influence of the main process parameters on the tool force, the micro- and macromechanical properties, and the joints microstructures in the dip and hump zones were analyzed. The results showed that using the rotational speed change-based approach, the hump zones are subjected to increased heat input with consequent increase of the heat-affected zone extension and average grain size (up to 11 μm). On the contrary, using the tool plunge change-based approach, the weld seam thickness in the dip zones is reduced, resulting in a decreased joint strength, with respect to tool rotation approach, equal to about 18%.

In the present study, a combined experimental and numerical investigation on Linear Friction Welding (LFW) of AA2011-T3 aluminum alloy was carried out in order to find the temperature dependent shear coefficient to be used in a 3D numerical model of the process. Torque, oscillation frequency and pressure were acquired in order to calculate the shear stress at the interface. A numerical thermal model was used to calculate the temperature at the interface between the specimens starting from experimental temperatures acquired through a thermocouple embedded in the LFW specimens. Finally, the calculated shear coefficient was used to model the contact between the two specimens in a dedicated 3D, Lagrangian, thermo-mechanically coupled rigid-viscoplastic numerical model of the LFW process. A narrow range of variation of the shear factor vs temperature curve was found with varying LFW process parameters and good agreement was obtained for the temperature prediction of the 3D model of the process. Keywords: Linear friction welding, Shear coefficient, FEM model, Aluminum alloys

Friction Stir Extrusion is a novel technique for direct recycling of metal scrap. In the process, a dedicated tool produces both the heat and the pressure to compact and extrude the original raw material, i.e., machining chip, as a consolidated component. A proper fixture was used to carry out an experimental campaign on Friction Stir Extrusion of AZ31 magnesium alloy. Variable tool rotation and extrusion ratio were considered. Appearance of defects and fractures was related to either too high or too low power input. The extruded rods were investigated both from the metallurgical and mechanical points of view. Tensile strength up to 80 % of the parent material was found for the best combination of process parameters. A peculiar 3D helical material flow was highlighted through metallurgical observation of the specimens.

Linear Friction Welding (LFW) is a solid state welding process used to joint bulk components. In the paper, an experimental and numerical study on LFW of Ti6Al4V titanium alloy is presented. A laboratory designed LFW machine has been used to weld the specimens with different contact pressure and oscillation frequency. The joint microstructure has been experimentally observed with SEM and EDS. A dedicated numerical model, able to predict temperature, strain and strain rate distribution as well as the phase volume fraction evolution, has been utilized to predict the final microstructure in the welded parts. It was found that complete transformation of the alpha phase into beta phase occurs during the process. After cool down, martensitic structure is obtained at the core of the weld due to high temperatures reached during the process and high cooling rates occurring at the end of the reciprocating motion. Microhardness measurements confirmed increased hardness in the Weld Zone with respect to the parent material

In the present work, friction stir welding experiments on AZ31 magnesium alloy sheets, characterized by a variable thickness along the welding line, were carried out. The approach adapted during welding consisted in maintaining constant the heat input to the joint. To this purpose, the rotational speed of the pin tool was increased with decreasing thickness and decreased with increasing thickness in order to obtain the same temperatures during welding. The amount by which the rotational speed was changed as a function of the sheet thickness was defined on the basis of the results given by FEM simulations of the FSW process. Finally, the effect of the in-process variation of the tool rotational speed on the mechanical and microstructural properties of FSWed joints was analysed by comparing both the nominal stress vs. nominal strain curves and microstructure of FSWed joints obtained in different process conditions. It was observed that FSW performed by keeping constant the heat input to the joint leads to almost coincident results both in terms of the curve shape, ultimate tensile strength and ultimate elongation values, and microstructure.

The production of most mechanical component requires machining operation, thus usually implying the cut material to be wasted as scrap. Traditional recycling techniques are not able to efficiently recycle metal chips because of some critical aspects that characterize such kind of scraps (shape, oxide layers, contaminating residues, etc). Friction Stir Extrusion is an innovative solid state direct-recycling technique for metal machining chips. During the process, a rotating tool is plunged into a hollows matrix to compact, stir and finally, back extrudes the chips to be recycled in a full dense rod. This process results to be particularly relevant since no preliminary treatment of the scrap is required. Experimental campaigns have been carried out in order to investigate the effects on process mechanics of the introduction of silicon carbide micro powders.

In this study, two bonding criteria, previously used for porthole die extrusion, are applied to FSW starting from the local value of the main field variables calculated through a specifically developed 3D numerical model of the process. Their applicability and effectiveness have been assessed through an experimental and numerical campaign carried out with the main process parameters varying in a wide range. The pressure–time–flow criterion was demonstrated to be better suited for FSW processes when large welding speed is used.

Solid-state bonding occurs in several manufacturing processes, as Friction Stir Welding, Porthole Die Extrusion and Roll Bonding. Proper conditions of pressure, temperature, strain and strain rate are needed in order to get effective bonding in the final component. In the paper, a neural network is set up, trained and used to predict the bonding occurrence starting from the results of specific numerical models developed for each process. The Plata-Piwnik criterion was used in order to define a quantitative parameter taking into account the effectiveness of the bonding. Excellent predictive capability of the network is obtained for each process.

Lap joints of Ti–6Al–4V were produced and the effect of the main process parameters was studied through macro and micro investigations highlighting mechanical resistance, microhardness profiles, grain size and phase distributions. A dedicated numerical model was used to link the input process parameters to temperature and strain distributions and to the final microstructure in the welded joint. It is found that the strain produced in the stir zone by proper combination of process parameters plays a fundamental role in the final microstructure and mechanical properties of the joints.

A microstructural and mechanical investigation on lap joints welded by friction stir welding and made out of a 7075-T6 stringer and a 2024-T4 skin is presented. In particular, the metallurgical and mechanical properties of joints have been studied at different tool feed rates (V = 35, 50, 100 mm/min) and constant rotation speed (R = 500 r/min). Temperature distributions have been monitored during the process. It is found that in the welded area, the recrystallized zone (nugget) has an average grain size of about 3 µm and exhibits coarsened MgZn2 particles on grain boundaries. The maximum values of microhardness in the welded skin increase with the process temperature, while they just slightly vary with process temperature in the stringer. From the mechanical point of view, the joint welded at R = 500 r/min and V = 50 mm/min exhibits both the highest strength and average microhardness value in the welded area.

Friction Stir Welding (FSW) is a solid state welding process patented in 1991 by TWI; initially adopted to weld aluminum alloys, it is now being successfully used also for high resistant materials. Welding of titanium alloys by traditional fusion welding techniques presents several difficulties due to high material reactivity with oxygen, hydrogen, and nitrogen with consequent embrittlement of the joint. In this way FSW represents a cost effective and high quality solution. The final mechanical properties of the joints are strictly connected to the microstructural evolutions, in terms of phase change, occurring during the process. In the paper a 3D FEM model of the FSW welding process, based on a thermo-mechanical fully coupled analysis, is presented. The model, tuned both for the thermo-mechanical analysis and the phase transformation through experimental data, is able to predict the phase volume fraction in the typical zones of the joints at the varying of the main process parameters. The obtained results permit to assess that the tuned FEM model of the FSW process can be utilized as an effective design tool.

In the paper solid state bonding conditions obtained in friction stir welding (FSW) of AA5754-H111 butt joints are analysed, considering the so called zigzag line in the transverse section of the joints. A wide experimental campaign was carried out varying both tool advancing speed and tool rotational one. The effects of the process on the mechanical properties of the joint were highlighted and micro- and macro-observations were used in order to explain the reasons of the enhanced mechanical properties found for the welded material. Numerical results derived from a FEM model previously developed by the authors were utilised to point out the different mechanical and metallurgical behavior of the obtained joints.

Two different in-process control strategies, developed in order to produce sound joints in AZ31 magnesium alloy by Friction Stir Welding on sheet blanks with a non-uniform thickness, are presented and compared. To this purpose, sheets with dip or hump were machined and welded by either changing the rotational speed or the tool plunging in order to keep constant the vertical force occurring during welding. The mechanical strength of the joints was measured in the zones where the sheets before welding were characterised by different thicknesses. The sheets welded by the two different strategies are characterized by very similar ultimate tensile strength values. Finally, the results showed that the two approaches permit to successfully weld sheets with non-uniform thickness with a reduced loss in the mechanical strength.

FSW of titanium alloys is nowadays one of the most challenging welding operations, even with a solid state process, due to the thermo-mechanical and thermo-chemical characteristics of such materials. Due to the relevant application of titanium alloys in the aeronautic and aerospace industries, in the recent years few attempts were carried out to develop FSW processes aimed to maximize the mechanical performances of the welded parts. In the paper a new fixture is presented allowing obtaining effective FSW joints of titanium blanks, which were investigated through mechanical and metallurgical tests highlighting the peculiarities of FSW of titanium alloys.

Spot welding can be considered a very common joining technique in automotive and transportation industries as it permits to obtain effective lap-joints with short process times and what is more it is easily developed through robots and automated systems. Recently the Friction Stir Spot Welding (FSSW) process has been proposed as a natural evolution of the already known Friction Stir Welding (FSW) process, allowing to obtain sound spot joints that do not suffer from the insurgence of typical welding defects due to the fusion of the base material. In the paper, a modified Friction Stir Spot Welding (FSSW) process, with a spiral circular movement given to the tool after the sinking stage, is proposed. A continuum based numerical model for Friction Stir Spot Welding process is developed, that is 2D Lagrangian implicit, coupled, rigid-viscoplastic. This model is used to investigate the distribution of the main field variables, namely temperature, strain and strain rate, as well as the Zener-Hollomon parameter which, in turn, strongly affects the Continuous Dynamic Recrystallization (CDRX) process that takes place in the weld nugget. Numerical and experimental results are presented showing the effects of the process parameters on the joint performances and the mechanical effectiveness of the modified process.

In this paper, the authors present the results of a wide experimental campaign on aeronautical T-shaped parts of industrial interest characterized by dissimilar materials for the skin and stringer. The friction stir welding process engineering was developed with the aim to determine the specific process parameters determining the soundness on the obtained T-parts both from the metallurgical and mechanical point of view. Furthermore, the performance of the obtained T-joints was investigated.

Aluminum alloys are widely used in the aircraft industries even if such materials present lower ductility with respect to steels, anisotropy phenomena and, more important, they are often “difficult” to be welded or even “non-weldable”. In the last years the friction stir welding process (FSW) was proposed and applied in order to get good mechanical and technological performances of the joints. In this paper, an experimental and numerical investigation on the lap joining of AA2198-T4 aluminum alloy blanks by FSW is presented. In particular the joints strength and metallurgical properties are investigated by varying the joint configuration and the tool geometry and rotational speed. It is found that the use of cylindrical–conical pin tools and the correct choice of the relative sheet positioning increase the welded nugget extension and integrity improving the mechanical performances of the obtained joints.

Friction stir welding (FSW) is an energy efficient and environmentally "friendly" (no fumes, noise, or sparks) welding process, during which the workpieces are welded together in a solid-state joining process at a temperature below the melting point of the workpiece material under a combination of extruding and forging. Since its invention in 1991 by TWI, such process has been reaching a continuously increasing popularity among aerospace, automotive and shipbuilding industries due its capability to weld unweldable or difficult-to-weld light alloys in different joint morphologies. In this paper a wide experimental campaign is carried out in order to obtain T and lap joints characterized by dimensions of industrial interest from two sheets, the stringer and the skin, of different materials. In particular a peculiar clamping fixture has been designed in order to assure a perfect contact between the stringer and the skin and to develop the “transparency” welding; a proper welding tool has been utilized allowing to obtain at the same time a sound joint and the designed final component fillet radii. Finally T-pull tests together with macro and micro observations have been developed at the varying of the main process parameters.

Friction stir spot welding (FSSW) has been proposed as an effective technology to spot weld the so-called “difficult to be welded” metal alloys. In the paper, a variation of the FSSW process has been considered. A tool path is given after the sinking phase nearby the initial penetration site; in this way a larger welding spot is obtained and more material is involved in the bonding process. The process mechanics of such modified FSSW process is highlighted and the joint strength undergoing tensile tests is considered at the varying both of the assigned tool path and of a few process parameters. Macro- and micro-analyses are made in order to analyze the local material microstructure evolution. It is found that improved performances, with respect to the “traditional” FSSW process, are obtained for all the considered case studies.

Friction-stir welding (FSW) is a relatively new but already well known solid-state welding process whose main advantage with respect to fusion welding processes is the possibility to successfully weld light alloys, traditionally considered difficult to weld or unweldable. Despite the good mechanical performances that can be obtained, there exists the possibility to further improve the joints' effectiveness through post-welding heat treatments that are however time and cost-expensive and, therefore, not best suited for industrial applications. In the present paper, the authors report the results of an experimental campaign, developed on FSW of AA7075-T6 aluminum alloy, aimed to investigate the possibility to enhance the joint performances through in process heat treatments. Welded joints were developed under three different conditions, namely, free air, forced air, and with water flowing on the surface of the joint itself. The influence of the external refrigerants was investigated at the varying of the specific thermal contribution conferred to the joint. Both mechanical and metallurgical investigations were developed on the welded joints highlighting both improvements of mechanical performances of the joints and reductions in the softening of the material when external refrigerants are used. © 2008 Springer-Verlag London Limited.

Titanium alloys are considered desirable materials when both good mechanical properties and weight reduction are required at the same time. This class of materials is widely used in those fields (aeronautics, aerospace) in which common steels and light-weight materials, e.g., aluminum alloys, are not able to satisfy all operative service conditions. During the last decade, forging of titanium alloys has attracted greater attention from both industrial and scientific/academic researchers because of their potential in providing a near net shaped part with minimal need for machining. In this paper, a numerical model of the forging sequences for a Ti-6Al-4V titanium alloy aerospace component is presented. The model was tested and validated against experimental forgings. The model is then applied to predict loads final microstructure and defects of an aeronautical component. In addition to metal flow and die stresses, microstructural transformations (α and β phases) are considered for the determination of proper process parameters. It is found that transformation from α/β to β phase during forging and reverse transformations in post-forge cooling needs to be considered in the computational model for reasonable prediction of forging loads and product properties.

Friction stir welding (FSW) is a solid state welding process used to weld difficult to be welded or unweldable materials as aluminium alloys. In the last years, other materials have been successfully tested as magnesium, titanium and nickel based alloys. Dissimilar joints can be obtained by FSW, but issues arise concerning the correct choice of the process parameters. In the paper, the results of an experimental and numerical campaign aimed to produce dissimilar AZ31-AA6016-T6 butt joints are presented. The effect of sheet mutual position and main process parameters was investigated. It was found that intermetallics are the main cause of the poor quality of the joints. Sound joints can be produced only if the magnesium alloy is in the advancing side.

Modern aeronautical and aerospace industries must face the demanding challenge of reducing operational consumption and production costs coming from materials and labor. Current trend of engineering is oriented to meet both requirements increasing the use of materials characterized by high specific resistance as titanium alloys. Hot forging can be used to reduce the production costs of titanium components: forging in closed dies of billets or semi-finished forms, at different temperatures above or below the β-transus temperature, allows the production of complex shapes with limited amount of edge trim removal and machining rework after forging. Unfortunately, as far as Ti–6Al–4V titanium alloy is regarded, several material peculiarities have to be properly taken into account in order to produce defect free Ti–6Al–4V alloy components. In the paper, an experimental and numerical campaign, focused on a typical case study for aeronautical engines, is carried out. The aim of this research is to investigate the process mechanics and the causes for the final microstructure observed through micrographic analysis. Once set-up and tested against experimental loads, the model was used to predict phases distributions after both forging and cool down.

The results of experimental activity on friction stir welding (FSW) of aluminum alloys are reported. Butt joints of two different materials, namely AA2024-T4 and AA7075-T6, were investigated from a metallurgical point of view. Grain dimensions and insoluble particle densities were investigated both in the parent materials and in the joints. Furthermore, the effect of post-welding heat treatments on the joint strength was studied.

In this paper the results of an experimental investigation into the local mechanical and morphological characterization of AA6082-T6 friction stir-welded (FSW) butt joints are illustrated. The softening effects of the welding process are highlighted through the use of micro-indentation tests on the top surface of the specimens. The effect of post-welding heat treatments was investigated, also.

Although friction stir welding (FSW) has been successfully used to join materials that are difficult-to-weld or unweldeable by fusion welding methods, it is still in its early development stage and, therefore, a scientific knowledge based predictive model is of significant help for thorough understanding of FSW process. In this paper, a continuum based FEM model for friction stir welding process is proposed, that is 3D Lagrangian implicit, coupled, rigid-viscoplastic. This model is calibrated by comparing with experimental results of force and temperature distribution, then is used to investigate the distribution of temperature and strain in heat affect zone and the weld nugget. The model correctly predicts the non-symmetric nature of FSW process, and the relationships between the tool forces and the variation in the process parameters. It is found that the effective strain distribution is non-symmetric about the weld line while the temperature profile is almost symmetric in the weld zone.

Titanium alloys are considered desirable materials when both mechanical properties and weight reduction are requested at the same time. This class of materials is widely used in application fields, like aeronautical, in which common steels and light-weight materials, like aluminum alloys, are not able to satisfy all operative service conditions. Most of manufacturing processes of titanium alloy components are based on machining operations, which allow obtaining very accurate final shapes but, at the same time, are affected by several disadvantage like material waste and general production costs. During the last decade, the forging processes for titanium alloys have attracted greater attention from both industrial and scientific/academic researchers because of their potential in providing a net shaped part with minimal need for machining. In this paper, a numerical analysis of the forging process design for an Ti-6Al-4V titanium alloy aerospace component is presented that focuses on the role of material evolution during thermomechanical processing. This component geometry is characterized by thin webs and ribs, and sharp corner and fillet radii. The numerical model was tested and validated by means of comparison with real experimental forgings in order to verify the quality in the prediction of material flow and microstructure evolution. Moreover, the analysis of forgeability of the same component with more critical geometrical ratios is considered in order to test the capability of code to support the forging sequence design in the case of a complex shape component.

New research trends for Friction Stir Welding include the use of highly resistant materials as steels and titanium alloys. In the paper a continuum based FEM model for Friction Stir Welding of lap joint made out of thin stainless steel sheets is proposed, that is 3D Lagrangian implicit, coupled, rigid-viscoplastic. The model, whose potential has been analyzed though temperature distribution comparisons, is able to predict temperature, strain and strain rate distributions, with varying process variables. In this way the FEM model can be applied for effective process and tool design.

Linear friction welding is a solid-state joining process for non-axisymmetric components in which joining of materials is obtained through the relative motion of two components under pressure. In the process the heat source is given by the frictional forces work decaying into heat determining a local softening of the material and eventually bonding conditions. A dedicated fixture was equipped with sensors for the in-process acquisition of variables regarding kinematics, dynamics and temperature levels. The results of an experimental campaign aimed to weld AA6082-T6 aluminum alloy parts are presented and a process window is identified for the used alloy.

The prediction of residual stresses is a relevant and, under many points of view, still open issue for a proper welding process design. In the present paper a 3D FE model, with general validity for different joint configurations, was used to simulate the Friction Stir Welding (FSW) process of butt joints through a single block approach. The model is able to predict the residual stresses by considering thermal actions only, thanks to a new time efficient approach. A good agreement between calculated and experimentally measured data was found; the effectiveness of the presented numerical procedure was evaluated by comparing the calculation times of the proposed method with the ones of already known FE approaches.

This paper presents the results of a combined experimental and numerical investigation focused on the effects of an in process water cooling treatment aimed at improving the final quality of friction stir welded butt joints in terms of mechanical resistance and metallurgy of the processed material. Micro and macro observations, together with the evolution of an already developed finite element tool, have been used to analyze specimens obtained under different process conditions. Water cooling was found to enhance joint strength, reducing the material softening usually observed in the thermo-mechanically affected zone area, with no detrimental effect on nugget integrity.

In the paper the microstructural phenomena in terms of average grain size occurring in friction stir welding (FSW) processes are focused. A neural network was linked to a finite element model (FEM) of the process to predict the average grain size values. The utilized net was trained starting from experimental data and numerical results of butt joints and then tested on further butt, lap and T-joints. The obtained results show the capability of the AI technique in conjunction with the FE tool to predict the final microstructure in the FSW joints.

Friction stir welding (FSW) is an energy efficient and environmentally “friendly” (no fumes, noise, or sparks) welding process, during which the workpiece are welded together in a solid-state joining process at a temperature below the melting point of the workpiece material under a combination of extruding and forging. Significant microstructural evolution takes place during FSW: in particular continuous dynamic recrystallization (CDRX) phenomena result in a highly refined grain structure in the weld nugget and strongly affect the final joint resistance. In the paper two different analytical models aimed to the determination of the average grain size due to continuous dynamic recrystallization phenomena in FSW processes of AA7075-T6 aluminum alloys have been implemented in a 3D FEM model and numerical analyses of the welding processes have been performed to verify their effectiveness.

The results of an experimental study on friction stir spot welding (FSSW) of AA6082-T6 are reported. In particular, process mechanics is highlighted and joint strength is considered in relation to varying the most relevant process parameters. Furthermore, the results obtained are compared with those derived from the application of traditional mechanical fastening techniques such as clinching and riveting. In this way the effectiveness of FSSW is highlighted.

Tailor welded blanks (TWBs) are conventionally produced by laser or traditional welding processes. In either case, the joints are created by solid-liquid-solid phase transformations that result in undesirable microstructures and tensile residual stresses detrimental to joint performance. This study investigates feasibility of an alternate joining process, friction stir welding (FSW). The joining of AA7075-T6 blanks of different thickness is investigated through FE analyses and controlled experiments. It is found that for a successful joint, the welding parameters have to be carefully designed so that the resulting metal flow and the temperature history during FSW are consistent for the two thicknesses.

The increasing use of structural light alloys in the aeronautical, automotive and transportation industry is pushing researchers to find new solutions for the production of innovative components. Mixed joints made out dissimilar alloys represent a challenge for engineers to the difficulties arising in welding materials characterized by significantly different mechanical, thermal and chemical properties. In the paper, an overview of the most used process to produce dissimilar joints of aluminum, magnesium and titanium is given. Both fusion based and solid state welding processes can be used. Although the joining of these materials is possible, particular attention must be taken to the choice of process parameters in order to avoid the formation of intermetallics, often resulting in brittle behavior and poor mechanical properties of the joints.