Search

In oxidation reactions catalysed by supported metal nanoparticles with oxygen as the terminal oxidant, the rate of the oxygen reduction can be a limiting factor. This is exemplified by the oxidative dehydrogenation of alcohols, an important class of reactions with modern commercial applications 1-3 . Supported gold nanoparticles are highly active for the dehydrogenation of the alcohol to an aldehyde 4 but are less effective for oxygen reduction 5,6 . By contrast, supported palladium nanoparticles offer high efficacy for oxygen reduction 5,6 . This imbalance can be overcome by alloying gold with palladium, which gives enhanced activity to both reactions 7,8,9 ; however, the electrochemical potential of the alloy is a compromise between that of the two metals, meaning that although the oxygen reduction can be improved in the alloy, the dehydrogenation activity is often limited. Here we show that by separating the gold and palladium components in bimetallic carbon-supported catalysts, we can almost double the reaction rate compared with that achieved with the corresponding alloy catalyst. We demonstrate this using physical mixtures of carbon-supported monometallic gold and palladium catalysts and a bimetallic catalyst comprising separated gold and palladium regions. Furthermore, we demonstrate electrochemically that this enhancement is attributable to the coupling of separate redox processes occurring at isolated gold and palladium sites. The discovery of this catalytic effect-a cooperative redox enhancement-offers an approach to the design of multicomponent heterogeneous catalysts., (© 2022. The Author(s), under exclusive licence to Springer Nature Limited.)

The base-free selective catalytic oxidation of n-butanol by O2 in an aqueous phase has been studied using Au-Pd bimetallic nanoparticles supported on titania. Au-Pd/TiO2 catalysts were prepared by different methods: wet impregnation, physical mixing, deposition-precipitation and sol immobilisation. The sol immobilisation technique, which used polyvinyl alcohol (PVA) as the stabilizing agent, gave the catalyst with the smallest average particle size and the highest stable activity and selectivity towards butyric acid. Increasing the amount of PVA resulted in a decrease in the size of the nanoparticles. However, it also reduced activity by limiting the accessibility of reactants to the active sites. Heating the catalyst to reflux with water at 90 °C for 1 h was the best method to enhance the surface exposure of the nanoparticles without affecting their size, as determined by TEM, X-ray photoelectron spectroscopy and CO chemisorption analysis. This catalyst was not only active and selective towards butyric acid but was also stable under the operating conditions., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The selectivity of photocatalytic phenol production from the direct oxidation of benzene can be enhanced by fine adjustment of the morphology and composition of Au-Pd metal nanoparticles supported on titanium dioxide thereby suppressing the decomposition of benzene and evolution of phenolic compounds.

The oxidation of 1,4-butanediol and butyrolactone have been investigated by using supported gold, palladium and gold-palladium nanoparticles. The products of such reactions are valuable chemical intermediates and, for example, can present a viable pathway for the sustainable production of polymers. If both gold and palladium were present, a significant synergistic effect on the selective formation of dimethyl succinate was observed. The support played a significant role in the reaction, with magnesium hydroxide leading to the highest yield of dimethyl succinate. Based on structural characterisation of the fresh and used catalysts, it was determined that small gold-palladium nanoalloys supported on a basic Mg(OH)2 support provided the best catalysts for this reaction., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report a convenient excess anion modification and post-reduction step to the impregnation method which permits the reproducible preparation of supported bimetallic AuPd nanoparticles having a tight particle size distribution comparable to that found for sol-immobilization materials but without the complication of ligands adsorbed on the particle surface. The advantageous features of the modified impregnation materials compared to those made by conventional impregnation include a smaller average particle size, an optimized random alloy composition, and improved compositional uniformity from particle-to-particle resulting in higher activity and stability compared to the catalysts prepared using both conventional impregnation and sol immobilization methods. Detailed STEM combined with EDX analyses of individual particles have revealed that an increase in anion concentration increases the gold content of individual particles in the resultant catalyst, thus providing a method to control/tune the composition of the nanoalloy particles. The improved activity and stability characteristics of these new catalysts are demonstrated using (i) the direct synthesis of hydrogen peroxide and (ii) the solvent-free aerobic oxidation of benzyl alcohol as case studies.

The efficacy of using cerium oxide foams as a support for Au nanoparticles and subsequent use as oxidation catalysts have been investigated. These were synthesized using L-asparagine to produce a cerium coordination polymer foam, which was calcined to give the oxide foam. Au nanoparticles were supported on the CeO(2) foams using a sol-immobilization method. The activity of the Au/foamCeO(2) for solvent-free benzyl alcohol oxidation was superior to standard Au/CeO(2) catalysts, and the activity was found to be dependent on the crystallization time of the precursor foam. A crystallization time of 4 h was found to produce the most active catalyst, which retained activity and a high selectivity to benzaldehyde (ca. 96 %) when re-used and this is related to the structure of the material. The high activity is attributed to the greater lability of surface oxygen in the support compared with commercial CeO(2) materials., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Metal nanoparticles that comprise a few hundred to several thousand atoms have many applications in areas such as photonics, sensing, medicine and catalysis. Colloidal methods have proven particularly suitable for producing small nanoparticles with controlled morphologies and excellent catalytic properties. Ligands are necessary to stabilize nanoparticles during synthesis, but once the particles have been deposited on a substrate the presence of the ligands is detrimental for catalytic activity. Previous methods for ligand removal have typically involved thermal and oxidative treatments, which can affect the size or morphology of the particles, in turn altering their catalytic activity. Here, we report a procedure to effectively remove the ligands without affecting particle morphology, which enhances the surface exposure of the nanoparticles and their catalytic activity over a range of reactions. This may lead to developments of nanoparticles prepared by colloidal methods for applications in fields such as environmental protection and energy production.

The oxidation of CO by Au/Fe(2)O(3) and Au/ZnO catalysts is compared in the very early stages of the reaction using a temporal analysis of products (TAP) reactor. For Au/Fe(2)O(3) pre-dosing the catalyst with (18)O labelled water gives an unexpected evolution order for the labelled CO(2) product with the C(18)O(2) emerging first, whereas no temporal differentiation is found for Au/ZnO. High pressure XPS experiments are then used to show that CO bond cleavage does occur for model catalysts consisting of Au particles deposited on iron oxide films but not when deposited on ZnO films. DFT calculations, show that this observation requires carbon monoxide to dissociate in such a way that cleavage of the CO bond occurs along with dynamically co-adsorbed oxygen so that the overall process of Au oxidation and CO dissociation is energetically favourable. Our results show that for Au/Fe(2)O(3) there is a pathway for CO oxidation that involves atomic C and O surface species which operates along side the bicarbonate mechanism that is widely discussed in the literature. However, this minor pathway is absent for Au/ZnO.

Catalytic surfactant stabilized gold-containing nanoparticles have been recovered by a new isothermal low-energy approach, by controlled and reversible changes in colloid stability based on fine-tuning of solvent quality. Once recovered, the nanoparticles can be re-dispersed in the solvent, or indeed dispersed into a different solvent. The morphology of the nanoparticles is not significantly affected by the recovery process and they can be used and reused as oxidation catalysts., (Copyright 2010 Elsevier Inc. All rights reserved.)

Glycolic acid is an important chemical that has uses as a cleaning agent as well as a chemical intermediate. At present glycolic acid is manufactured from either chloroacetic acid or from formaldehyde hydrocyanation, both routes being nongreen and using nonsustainable resources. We investigate the possibility of producing glycolate from the oxidation of glycerol, a sustainable raw material. We show that by using 1 % wt Au/carbon catalysts prepared using a sol-immobilization method glycolate yields of ca. 60 % can be achieved, using hydrogen peroxide as oxidant in an autoclave reactor. We describe and discuss the reaction mechanism and consider the reaction conditions that maximize the formation of glycolate.

Gold nanocrystals absorbed on metal oxides have exceptional properties in oxidation catalysis, including the oxidation of carbon monoxide at ambient temperatures, but the identification of the active catalytic gold species among the many present on real catalysts is challenging. We have used aberration-corrected scanning transmission electron microscopy to analyze several iron oxide-supported catalyst samples, ranging from those with little or no activity to others with high activities. High catalytic activity for carbon monoxide oxidation is correlated with the presence of bilayer clusters that are approximately 0.5 nanometer in diameter and contain only approximately 10 gold atoms. The activity of these bilayer clusters is consistent with that demonstrated previously with the use of model catalyst systems.