Search

The reduction of biomass-derived compounds gives access to valuable chemicals from renewable sources, circumventing the use of fossil feedstocks. Herein, we describe the use of iron-nickel magnetic nanoparticles for the reduction of biomass model compounds in aqueous media under magnetic induction. Nanoparticles with a hydrophobic ligand (FeNi 3 -PA, PA=palmitic acid) have been employed successfully, and their catalytic performance is intended to improve by ligand exchange with lysine (FeNi 3 -Lys and FeNi 3 @Ni-Lys NPs) to enhance water dispersibility. All three catalysts have been used to hydrogenate 5-hydroxymethylfurfural into 2,5-bis(hydroxymethyl)furan with complete selectivity and almost quantitative yields, using 3 bar of H 2 and a magnetic field of 65 mT in water. These catalysts have been recycled up to 10 times maintaining high conversions. Under the same conditions, levulinic acid has been hydrogenated to γ-valerolactone, and 4'-hydroxyacetophenone hydrodeoxygenated to 4-ethylphenol, with conversions up to 70 % using FeNi 3 -Lys, and selectivities above 85 % in both cases. This promising catalytic system improves biomass reduction sustainability by avoiding noble metals and expensive ligands, increasing energy efficiency via magnetic induction heating, using low H 2 pressure, and proving good reusability while working in an aqueous medium., (© 2023 The Authors. ChemSusChem published by Wiley-VCH GmbH.)

Magnetic nanoparticles (NPs) are attractive both for their fundamental properties and for their potential in a variety of applications ranging from nanomedicine and biology to micro/nanoelectronics and catalysis. While these fields are dominated by the use of iron oxides, reduced metal NPs are of interest since they display high magnetization and adjustable anisotropy according to their size, shape and composition. The use of organometallic precursors makes it possible to adjust the size, shape (sphere, cube, rod, wire, urchin, …) and composition (alloys, core-shell, composition gradient, dumbbell, …) of the resulting NPs and hence their magnetic properties. We discuss here the synthesis of magnetic metal NPs from organometallic precursors carried out in Toulouse, as well as their associated properties and their potential in applications., (© 2022 Wiley-VCH GmbH.)

A key challenge for designing hybrid materials is the development of chemical tools to control the organization of inorganic nanoobjects at low scales, from mesoscopic (~µm) to nanometric (~nm). So far, the most efficient strategy to align assemblies of nanoparticles consists in a bottom-up approach by decorating block copolymer lamellae with nanoobjects. This well accomplished procedure is nonetheless limited by the thermodynamic constraints that govern copolymer assembly, the entropy of mixing as described by the Flory-Huggins solution theory supplemented by the critical influence of the volume fraction of the block components. Here we show that a completely different approach can lead to tunable 2D lamellar organization of nanoparticles with homopolymers only, on condition that few elementary rules are respected: 1) the polymer spontaneously allows a structural preorganization, 2) the polymer owns functional groups that interact with the nanoparticle surface, 3) the nanoparticles show a surface accessible for coordination.

We report a tunable organometallic synthesis of monodisperse iron carbide and core/shell iron/iron carbide nanoparticles displaying a high magnetization and good air-stability. This process based on the decomposition of Fe(CO)(5) on Fe(0) seeds allows the control of the amount of carbon diffused and therefore the tuning of nanoparticles magnetic anisotropy. This results in unprecedented hyperthermia properties at moderate magnetic fields, in the range of medical treatments.

The morphology of platinum nanoparticles synthesized using an organometallic approach from PtMe(2) (C(8) H(12) ) is influenced by the nature of the ligands used as stabilizing agents. The use of long alkyl chain amines leads to the formation of multipodal nanoparticles that transform into compact nano-objects, adopting cubic, truncated cubic, or cuboctahedral shapes. In contrast, the use of diamine ligands allows the growth of compact (111) arrowlike faces, forming polycrystalline nanoparticles of an overall desert-rose aspect. Different reaction parameters are studied ([ligand]/[metal] ratio, temperature, solvent identity) in order to optimize the various shapes., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The (2)H quadrupolar interaction is a sensitive tool for the characterization of deuterium-metal binding states. In the present study, experimental solid-state (2)H MAS NMR techniques are used in the investigations of two ruthenium clusters, D(4)Ru(4)(CO)(12) (1) and D(2)Ru(6)(CO)(18) (2), which serve as model compounds for typical two-fold, three-fold, and octahedral coordination sites on metal surfaces. By line-shape analysis of the (2)H MAS NMR measurements of sample 1, a quadrupolar coupling constant of 67 +/- 1 kHz, an asymmetry parameter of 0.67 +/- 0.1, and an isotropic chemical shift of -17.4 ppm are obtained. In addition to the neutral complex, sample 2 includes two ionic clusters, identified as anionic [DRu(6)(CO)(18)](-) (2(-)) and cationic [D(3)Ru(6)(CO)(18)](+) (2(+)). By virtue of the very weak quadrupolar interaction (<2 kHz) and the strong low-field shift (+16.8 ppm) of 2(-), it is shown that the deuteron is located in the symmetry center of the octahedron spanned by the six ruthenium atoms. For the cationic 2(+), the quadrupolar interaction is similar to that of the neutral 2. Quantum chemical DFT calculations at different model structures for these ruthenium clusters were arranged in order to help in the interpretation of the experimental results. It is shown that the (2)H nuclear quadrupolar interaction is a sensitive tool for distinguishing the binding state of the deuterons to the transition metal. Combining the data from the polynuclear complexes with the data from mononuclear complexes, a molecular ruler for quadrupolar interactions is created. This ruler now permits the solid-state NMR spectroscopic characterization of deuterium adsorbed on the surfaces of catalytically active metal nanoparticles.

The reduction of [Pt(COD)(CH3)2] with CO in the presence of hexadecylamine (HDA) and oleic acid (OlAc) leads to amine carbonylation and formation of an air-stable colloidal solution of N,N'-bis(hexadecyl)urea-stabilized Pt(0) nanoparticles. These air-stable colloidal solutions can be used to form thin films of Pt nanoparticles on a silicon substrate.

Metallic Ru, Rh, and Ir nanoparticles were prepared by the decomposition of organometallic precursors under H(2) pressure in the presence of 1,3-diphosphite ligands, derived from carbohydrates, as stabilizing agents. Structural modifications to the diphosphite backbone were found to influence the nanoparticles' size, dispersion, and catalytic activity. In the hydrogenation of o- and m-methylanisole, the Rh nanoparticles showed higher catalytic activity than the corresponding Ru nanoparticles. The Ir nanoparticles presented the lowest catalytic activity of the series. In all cases, the hydrogenation of o-methylanisole gave total selectivity for the cis-product, however, the ee of the product was always less than 6 %. A maximum of 81 % cis-selectivity was obtained for the hydrogenation of m-methylanisole, however, no asymmetric induction was observed. These results show that the catalytic activity is affected by a combination of influences from the substrate, the diphosphite ligands, and the metallic nanoparticles.

Maghemite (gamma-Fe(2)O(3)) nanoparticles stabilized by long-alkyl-chain amines are synthesized by using an organometallic approach. This method consists of the hydrolysis and oxidation of an organometallic precursor, Fe[N(SiMe(3))(2)](2), in the presence of amine ligands as stabilizing agent in an organic solvent, namely tetrahydrofuran or toluene. Whatever the experimental conditions, particles with a diameter of 2.8 nm are obtained. The use of high-resolution transmission electron microscopy and wide-angle X-ray scattering, together with Mössbauer spectroscopy and SQuId magnetometry, allows a complete characterization of these particles. Herein, we show that their structure is composed of a well-ordered core surrounded by a more disordered shell. The size of the latter varies from 0.65 to 0.50 nm depending on the experimental conditions and is of prime importance for the understanding of the magnetic properties. We demonstrate that the shorter the alkyl chain length of the amine 1) the better the crystallinity of the particle's core and 2) the stronger the interparticle interactions.

We report in this paper the stabilization of ruthenium nanoparticles using a very simple ligand (4-(3-phenylpropyl)pyridine), through strong pi-coordination of the phenyl moiety.

The reactivity of ruthenium nanoparticles stabilized by 4-(3-phenylpropyl)pyridine in hydrogen transfer and hydrogenation processes was monitored by NMR spectroscopy. Unsaturated substrates such as styrene, 4-vinylpyridine and 4-phenyl-but-3-en-2-one were used as model molecules to investigate the surface properties of nanoparticles by a combination of NMR studies. Interestingly, the hydrides present at the metallic surface after nanoparticles synthesis are selectively transferred to vinylic groups without reducing the aromatic rings, under dihydrogen-free atmosphere. DOSY and NOE NMR experiments permitted to propose a way of interaction of the organic compounds at the metallic surface. In particular, the coordination of the substrate could be evidenced for 4-vinylpyridine and 4-ethylpyridine but not for styrene derivatives. Graphical Abstract: Curved double arrows represent magnetization exchanges. Straight arrows represent adsorption/desorption phenomena. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]