Search

S-impregnation of biochar through elemental S streaming is known to increase its sorption performance against Hg and methyl mercury (MeHg). However, the effects of %S-loading on biochar's mechanism and sorption capacities for MeHg, and its consequent impact when used as an amendment material for Hg-contaminated sediments, are poorly understood, and thus, were investigated in this work. Our results showed that a minimum sulfur loading of 1% was the most effective in reducing MeHg levels in sediments. At higher %S-loading (3-20%), the reduction in surface area, pore blockage due to unreacted sulfur particles, and presence of poorly bound sulfur species resulted in lowered effectiveness for MeHg control. Increasing S-functionalization during impregnation shifted the sorption process of MeHg from Hg-O to Hg-S in S-impregnated biochar (BCS). Our 60-day slurry experiment showed a significant reduction in pore water THg (40-70%) and MeHg (30-55%), as well as sediment MeHg (50-60%) in biochar-amended sediments. The reduction in the bioavailable Hg resulted in lowered Hg methylation, as supported by the suppression of both the Fe- and SO 4 2- -reduction activities in the amended sediments. The microbial community structure in BCS-amended sediments showed a shift towards sulfur-consuming, iron-reducing, thiosulfate-oxidizing, and sulfate-reducing bacterial populations. At the genus level, the overall relative abundance of principal Hg methylators was also lower in the BCS treatment than in the unamended sediments. This study highlights the application of BCS as a promising strategy for remediation of Hg-contaminated sediments., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Activated carbon (AC) amendment is considered as one of the alternatives for managing and remediating mercury (Hg) contaminated sediments because of its high sorptive capacity and potential to immobilize the contaminant. For this study, the underlying mechanisms that control the reduction of Hg bioavailability in AC-amended estuarine sediments were investigated in box microcosm set-ups with 28-day Asian clam bioassay experiments. The application of diffusive gradients in thin film technique (DGT) revealed that the total mercury and methylmercury levels in sediment pore water decreased by 60%-75% in 1%-3% AC-amended sediments. This decrease subsequently led to a linear reduction in the Hg body burden in Asian clams, even at 1% sorbent mixing. These observations implied that AC amendment reduced the net flux of Hg into the pore water and overlying water, resulting in reduced Hg bioaccumulation in benthic organisms. The addition of AC to sediment also led to reduced dissolved organic carbon and several biogeochemical indicators (HS - , Mn, and Fe) in the pore water. Furthermore, the 16 S rRNA gene amplicon sequencing analysis revealed noticeable alterations in the microbial communities after AC amendment. The predominant phylum was Firmicutes in control sediment, Bacteroidetes in 1% AC-amended sediment, and Proteobacteria in both 2% and 3% AC-amended sediment samples. The genera-level analysis showed that the relative abundance of the Hg-methylators decreased as the level of AC amendment increased. These observations suggested that AC amendment decreased Hg bioavailability not only by physicochemical sorption but also by changing geochemical species and shifting the microbial community composition., (Copyright © 2021. Published by Elsevier Ltd.)

The potential of diffusive gradient in thin film (DGT) as a long-term monitoring tool to assess trace level mercury (Hg) in surface waters was evaluated. A piston type DGT sampler and a plate-type device that could hold 15 DGTs were designed. The device contained piston type DGT samplers with varying diffusive gel thicknesses, that is, 0.5, 0.75, and 1.0 mm, respectively. Three DGT devices were deployed in a lake for 5 weeks, and two were deployed in a stream for 3 weeks. In the lake, the total Hg (THg) mass accumulated in the DGT varied between 0.05 and 0.15 ng, which increased with an increase in deployment time and decreased with an increase in agarose diffusion gel thickness. The DGT concentration in the lake water for a 2 week period was estimated to be about 0.8-1.0 ng/L, which was close to the measured value of 1.1 (± 0.13) ng/L, using the grab sampling technique. However, the DGT estimated at 4 and 6 weeks showed a concentration of about 0.5-0.7 ng/L, which is about twice as small as that measured by grab sampling. This underestimation of the THg levels in water appear to be caused by additional thicknesses of the physical diffusive boundary layer (0.15, 0.5, 1.29 mm) and biofilm, outside the DGT filter. The predicted DGT concentration in the upper stream of the Nakdong River was estimated to be about 0.8-1.4 ng/L, which is similar to the value of 1.22 (± 0.29) ng/L measured in the field by grab sampling. The concentration of THg was estimated to be about 1.0-1.2 ng/L, which is similar to the values measured by grab sampling. The additional diffusion thickness formed outside the DGT filter was 0.018 mm and 0.093 mm at 1 and 3 weeks, respectively, which is not larger than the diffusion gel thickness (0.5-1.0 mm). This was because DGT was installed in a region where the flow velocity is high, and the thickness of the diffusion boundary layer outside the filter is negligible.

Heavy metal contamination in aquatic systems is a big problem in many areas around the world. In 2016, high mercury concentrations were reported in bivalves (Corbicula leana) and sediments near the confluence of the Hyeongsan River and Chilseong Creek located in Pohang, a steel industrial city in the south-east coast of the Korean peninsula. Given that both the Chilseong and Gumu creeks run through the Pohang industrial complex and ultimately flow to the Hyeongsan River, it is imperative to determine if the industrial effluents have any impact on the mercury contamination in these two streams and the Hyeongsan River. In this work, we investigated the concentration levels of different heavy metals using cold vapor atomic fluorescence spectroscopy and inductively coupled plasma-mass spectroscopy. The metal concentration in the water samples from the Hyeongsan River, Gumu Creek, and Chilseong Creek did not exceed the limits for drinking water quality set by the US EPA and World Health Organization. However, the sediment samples were found to be heavily contaminated by Hg with levels exceeding the toxic effect threshold. Gumu Creek was found to be heavily contaminated. The concentrations of the different heavy metals increased downstream, and the samples collected from the sites in the Hyeongsan River near the Gumu Creek, an open channel for wastewater discharge of companies in the Pohang Industrial Complex, showed higher contamination levels, indicating that the effluents from the industrial complex are a possible source of contamination in the river.

The potential of diffusive gradient in thin film (DGT) as a long-term monitoring tool to assess trace level mercury (Hg) in surface waters was evaluated. A piston type DGT sampler and a plate-type device that could hold 15 DGTs were designed. The device contained piston type DGT samplers with varying diffusive gel thicknesses, that is, 0.5, 0.75, and 1.0 mm, respectively. Three DGT devices were deployed in a lake for 5 weeks, and two were deployed in a stream for 3 weeks. In the lake, the total Hg (THg) mass accumulated in the DGT varied between 0.05 and 0.15 ng, which increased with an increase in deployment time and decreased with an increase in agarose diffusion gel thickness. The DGT concentration in the lake water for a 2 week period was estimated to be about 0.8–1.0 ng/L, which was close to the measured value of 1.1 (± 0.13) ng/L, using the grab sampling technique. However, the DGT estimated at 4 and 6 weeks showed a concentration of about 0.5–0.7 ng/L, which is about twice as small as that measured by grab sampling. This underestimation of the THg levels in water appear to be caused by additional thicknesses of the physical diffusive boundary layer (0.15, 0.5, 1.29 mm) and biofilm, outside the DGT filter. The predicted DGT concentration in the upper stream of the Nakdong River was estimated to be about 0.8–1.4 ng/L, which is similar to the value of 1.22 (± 0.29) ng/L measured in the field by grab sampling. The concentration of THg was estimated to be about 1.0–1.2 ng/L, which is similar to the values measured by grab sampling. The additional diffusion thickness formed outside the DGT filter was 0.018 mm and 0.093 mm at 1 and 3 weeks, respectively, which is not larger than the diffusion gel thickness (0.5–1.0 mm). This was because DGT was installed in a region where the flow velocity is high, and the thickness of the diffusion boundary layer outside the filter is negligible. [ABSTRACT FROM AUTHOR]