Search

Abstract: Membrane separation for gas purification is an energy‐efficient and environment‐friendly technology. However, the development of high performance membranes is still a great challenge. In principle, mixed matrix membranes (MMMs) have the potential to overcome current materials limitations, but in practice there is no straightforward method to match the properties of fillers and polymers (the main components of MMMs) in such a way that the final membrane performance reflects the high performance of the microporous filler and the processability of the continuous polymer phase. This issue is especially important when high flux polymers are utilized. In this work, we demonstrate that the use of small amounts of a glassy polymer in combination with high performance PIM‐1 allow for the preparation of metal–organic framework (MOF)‐based MMMs with superior separation properties and low aging rates under humid conditions, meeting the commercial target for post‐combustion CO2 capture. [ABSTRACT FROM AUTHOR]

Abstract: To gain insight into the influence of metal–organic framework (MOF) fillers and polymers on membrane performance, eight different composites were studied by combining four MOFs and two polymers. MOF materials (NH2‐MIL‐53(Al), MIL‐69(Al), MIL‐96(Al) and ZIF‐94) with various chemical functionalities, topologies, and dimensionalities of porosity were employed as fillers, and two typical polymers with different permeability‐selectivity properties (6FDA‐DAM and Pebax) were selected as matrices. The best‐performing MOF–polymer composites were prepared by loading 25 wt % of MIL‐96(Al) as filler, which improved the permeability and selectivity of 6FDA‐DAM to 32 and 10 %, while for Pebax they were enhanced to 25 and 18 %, respectively. The observed differences in membrane performance in the separation of CO2 from N2 are explained on the basis of gas solubility, diffusivity properties, and compatibility between the filler and polymer phases. [ABSTRACT FROM AUTHOR]