Search

The bacterial flagellar protein export machinery consists of a transmembrane export gate complex and a cytoplasmic ATPase complex. The gate complex has two intrinsic and distinct H + -driven and Na + -driven engines to drive the export of flagellar structural proteins. Salmonella wild-type cells preferentially use the H + -driven engine under a variety of environmental conditions. To address how the Na + -driven engine is activated, we analyzed the fliJ(Δ13-24) fliH(Δ96-97) mutant and found that the interaction of the FlgN chaperone with FlhA activates the Na + -driven engine when the ATPase complex becomes non-functional. A similar activation can be observed with either of two single-residue substitutions in FlhA. Thus, it is likely that the FlgN-FlhA interaction generates a conformational change in FlhA that allows it to function as a Na + channel. We propose that this type of activation would be useful for flagellar construction under conditions in which the proton motive force is severely restricted.

The flagellar motor can spin in both counterclockwise (CCW) and clockwise (CW) directions. The flagellar motor consists of a rotor and multiple stator units, which act as a proton channel. The rotor is composed of the transmembrane MS ring made of FliF and the cytoplasmic C ring consisting of FliG, FliM, and FliN. The C ring is directly involved in rotation and directional switching. The Salmonella FliF-FliG deletion fusion motor missing 56 residues from the C terminus of FliF and 94 residues from the N terminus of FliG keeps a domain responsible for the interaction with the stator intact, but its motor function is reduced significantly. Here, we report the structure and function of the FliF-FliG deletion fusion motor. The FliF-FliG deletion fusion not only resulted in a strong CW switch bias but also affected rotor-stator interactions coupled with proton translocation through the proton channel of the stator unit. The energy coupling efficiency of the deletion fusion motor was the same as that of the wild-type motor. Extragenic suppressor mutations in FliG, FliM, or FliN not only relieved the strong CW switch bias but also increased the motor speed at low load. The FliF-FliG deletion fusion made intersubunit interactions between C ring proteins tighter compared to the wild-type motor, whereas the suppressor mutations affect such tighter intersubunit interactions. We propose that a change of intersubunit interactions between the C ring proteins may be required for high-speed motor rotation as well as direction switching. IMPORTANCE The bacterial flagellar motor is a bidirectional rotary motor for motility and chemotaxis, which often plays an important role in infection. The motor is a large transmembrane protein complex composed of a rotor and multiple stator units, which also act as a proton channel. Motor torque is generated through their cyclic association and dissociation coupled with proton translocation through the proton channel. A large cytoplasmic ring of the motor, called C ring, is responsible for rotation and switching by interacting with the stator, but the mechanism remains unknown. By analyzing the structure and function of the wild-type motor and a mutant motor missing part of the C ring connecting itself with the transmembrane rotor ring while keeping a stator-interacting domain for bidirectional torque generation intact, we found interesting clues to the change in the C ring conformation for the switching and rotation involving loose and tight intersubunit interactions., (Copyright © 2019 Sakai et al.)

The bacterial flagellum is a supramolecular motility machine. Flagellar assembly begins with the basal body, followed by the hook and finally the filament. A carboxyl-terminal cytoplasmic domain of FlhA (FlhA C ) forms a nonameric ring structure in the flagellar type III protein export apparatus and coordinates flagellar protein export with assembly. However, the mechanism of this process remains unknown. We report that a flexible linker of FlhA C (FlhA L ) is required not only for FlhA C ring formation but also for substrate specificity switching of the protein export apparatus from the hook protein to the filament protein upon completion of the hook structure. FlhA L was required for cooperative ring formation of FlhA C . Alanine substitutions of residues involved in FlhA C ring formation interfered with the substrate specificity switching, thereby inhibiting filament assembly at the hook tip. These observations lead us to propose a mechanistic model for export switching involving structural remodeling of FlhA C .

The bacterial flagellar export apparatus is required for the construction of the bacterial flagella beyond the cytoplasmic membrane. The membrane-embedded part of the export apparatus, which consists of FlhA, FlhB, FliO, FliP, FliQ and FliR, is located in the central pore of the MS ring formed by 26 copies of FliF. The C-terminal cytoplasmic domain of FlhA is located in the centre of the cavity within the C ring made of FliG, FliM and FliN. FlhA interacts with FliF, but its assembly mechanism remains unclear. Here, we fused yellow fluorescent protein (YFP) and cyan fluorescent protein (CFP) to the C-termini of FliF and FlhA and investigated their subcellular localization by fluorescence microscopy. The punctate pattern of FliF-YFP localization required FliG but neither FliM, FliN, FlhA, FlhB, FliO, FliP, FliQ nor FliR. In contrast, FlhA-CFP localization required FliF, FliG, FliO, FliP, FliQ and FliR. The number of FlhA-YFP molecules associated with the MS ring was estimated to be about nine. We suggest that FlhA assembles into the export gate along with other membrane components during the MS ring complex formation in a co-ordinated manner., (© 2014 John Wiley & Sons Ltd.)

The flagellar type III protein export apparatus plays an essential role in the formation of the bacterial flagellum. FliH forms a complex along with FliI ATPase and is postulated to provide a link between FliI ring formation and flagellar protein export. Two tryptophan residues of FliH, Trp7 and Trp10, are required for the effective docking of the FliH-FliI complex to the export gate made of six membrane proteins. However, it remains unknown which export gate component interacts with these two tryptophan residues. Here, we performed targeted photo-cross-linking of the extreme N-terminal region of FliH (FliH(EN)) with its binding partners. We replaced Trp7 and Trp10 of FliH with p-benzoyl-phenylalanine (pBPA), a photo-cross-linkable unnatural amino acid, to produce FliH(W7pBPA) and FliH(W10pBPA). They were both functional and were photo-cross-linked with one of the export gate proteins, FlhA, but not with the other gate proteins, indicating that these two tryptophan residues are in close proximity to FlhA. Mutant FlhA proteins that are functional in the presence of FliH and FliI but not in their absence showed a significantly reduced function also by N-terminal FliH mutations even in the presence of FliI. We suggest that the interaction of FliH(EN) with FlhA is required for anchoring the FliI hexamer ring to the export gate for efficient flagellar protein export.

The bacterial flagellar protein export machinery consists of a transmembrane export gate complex and a cytoplasmic ATPase complex. The gate complex has two intrinsic and distinct H+-driven and Na+-driven engines to drive the export of flagellar structural proteins. Salmonella wild-type cells preferentially use the H+-driven engine under a variety of environmental conditions. To address how the Na+-driven engine is activated, we analyzed the fliJ(Δ13–24) fliH(Δ96–97) mutant and found that the interaction of the FlgN chaperone with FlhA activates the Na+-driven engine when the ATPase complex becomes non-functional. A similar activation can be observed with either of two single-residue substitutions in FlhA. Thus, it is likely that the FlgN-FlhA interaction generates a conformational change in FlhA that allows it to function as a Na+ channel. We propose that this type of activation would be useful for flagellar construction under conditions in which the proton motive force is severely restricted. Minamino et al. report that the bacterial FlgN chaperone acts as a switch to activate a backup mechanism for H+-coupled flagellar protein export by interacting with FlhAC to activate the Na+-driven export engine. The proposed mechanism helps to explain how bacteria can maintain flagellar protein export when the ATPase complex export machinery becomes non-functional. [ABSTRACT FROM AUTHOR]

Most bacterial flagellar proteins are exported by the flagellar type III protein export apparatus for their self-assembly. FliI ATPase forms a complex with its regulator FliH and facilitates initial entry of export substrates to the export gate composed of six integral membrane proteins. The FliH–FliI complex also binds to the C ring of the basal body through a FliH–FliN interaction for efficient export. However, it remains unclear how these reactions proceed within the cell. Here, we analysed subcellular localization of FliI–YFP by fluorescence microscopy. FliI–YFP was localized to the flagellar base, and its localization required both FliH and the C ring. The ATPase activity of FliI was not required for its localization. FliI–YFP formed a complex with FliHΔ1 (missing residues 2–10) but the complex did not show any localization. FliHΔ1 did not interact with FliN, and alanine-scanning mutagenesis revealed that only Trp-7 and Trp-10 of FliH are essential for the interaction with FliN. Overproduction of the FliH–FliI complex improved the export activity of the fliN mutant whereas neither of the FliH(W7A)-FliI nor FliH(W10A)-FliI complexes did, suggesting that Trp-7 and Trp-10 of FliH are also required for efficient localization of the FliH–FliI complex to the export gate. [ABSTRACT FROM AUTHOR]

For self-assembly of the bacterial flagellum, a specific protein export apparatus utilizes ATP and proton motive force (PMF) as the energy source to transport component proteins to the distal growing end. The export apparatus consists of a transmembrane PMF-driven export gate and a cytoplasmic ATPase complex composed of FliH, FliI and FliJ. The FliI6FliJ complex is structurally similar to the α3β3γ complex of FOF1-ATPase. FliJ allows the gate to efficiently utilize PMF to drive flagellar protein export but it remains unknown how. Here, we report the role of ATP hydrolysis by the FliI6FliJ complex. The export apparatus processively transported flagellar proteins to grow flagella even with extremely infrequent or no ATP hydrolysis by FliI mutation (E211D and E211Q, respectively). This indicates that the rate of ATP hydrolysis is not at all coupled with the export rate. Deletion of FliI residues 401 to 410 resulted in no flagellar formation although this FliI deletion mutant retained 40% of the ATPase activity, suggesting uncoupling between ATP hydrolysis and activation of the gate. We propose that infrequent ATP hydrolysis by the FliI6FliJ ring is sufficient for gate activation, allowing processive translocation of export substrates for efficient flagellar assembly. [ABSTRACT FROM AUTHOR]