Search

Breast cancer is the most common cancer type among women. Approximately 40,000 women are expected to die from breast cancer every year. While digital mammography has a central role in the early diagnosis of breast cancer, many cancers are not visible in mammography, for example in women with dense breast tissue. Contrast enhanced magnetic resonance imaging (CE-MRI) of the breast is often used to detect lesions not visible in mammography. Lesions with suspicious characteristics on CE-MRI need to be further assessed with MRI-guided biopsy. However, MRI-guided biopsy is expensive, time consuming, and not widely available. In this paper, a novel method for a matching tool between MRI and spot mammograms is proposed. Our aim is to transfer information that is only visible in MRI onto mammographic spot projections, to enable X-ray guided biopsy even if the lesion is only visible in MRI. Two methods of registration in combination are used; a biomechanical model based registration between MRI and full view X-ray mammograms and a subsequent image based registration between full mammograms and spot mammograms. Preliminary results assessed for one patient from the Medical University of Vienna are presented. The target registration error (TRE) of biomechanical model based registration is 2.4 mm and the TRE of the image based registration is 9.5 mm. The total TRE of the two steps is 7.3 mm.

Focused ultrasound (FUS) is a promising method to open the blood brain barrier (BBB) for treatment of neurodegenerative diseases. Accurate targeting is essential for a successful BBB opening (BBBo). We aim to develop a robust therapy planning for BBBo in mice, which is challenging due to the size of the brain and the influence of the skull on the ultrasound pressure distribution. For enabling mouse individual therapy planning, a simulation tool is proposed, developed and validated. We used the k-Wave toolbox to enable 3D acoustic simulations of the commercial FUS system from Image Guided Therapy (IGT). Micro-CT scans were used to model the geometry of skulls. Simulations using a mouse skull showed an attenuation of approx. 20–24% depending on the position of penetration, which was validated by hydrophone measurements in the same range. Based on these validations we planned BBBo in m ice by placing the transducer at different positions over the mouse brain and varying the excitation amplitude. With different transducer positions, the peak pressure in the brain varied between 0.54 MPa and 0.62 MPa at 11% output level, which is expected to enable safe BBBo. Subsequently, in vivo experiments were conducted using the aforementioned simulation parameters. BBBo was confirmed by contrast enhanced T1 weighted magnetic resonance images immediately after sonication.

A 3D ultrasound computer tomography (USCT) device with a nearly isotropic and spatially invariant 3D point spread function has been constructed at Institute for Data Processing and Electronic (IPE), Karlsruhe Institute of Technology (KIT). This device is currently applied in clinical studies for breast cancer screening. In this paper, a new method to develop an automated segmentation algorithm for USCT acquired images is proposed. The method employs distance regularized level set evolutionary (DRLSE) active contours along with surface fitting extrapolation and 3D binary mask generation for fully automatic segmentation outcome. In the first stage of the proposed algorithm, DRLSE is applied to those 3D USCT slice images which contain breast and are less affected by noise and ring artifacts named as Cat2. The DRLSE segmentation results are employed to extrapolate the rest of slice images known as Cat1. To overcome defectively segmented slice images, a 3D binary mask is generated out of USCT attenuation images. The 3D binary mask is multiplied by the DRLSE-based segmentation results to form finally segmented 3D USCT images. The method was tested on 12 clinical dataset images. According to F-measure criterion, the proposed method shows higher performance than the previously proposed semiautomatic segmentation one.

A promising candidate for improved imaging of breast cancer is ultrasound computer tomography (USCT). Current experimental USCT systems are still focused in elevation dimension resulting in a large slice thickness, limited depth of field, loss of out-of-plane reflections, and a large number of movement steps to acquire a stack of images. 3D USCT emitting and receiving spherical wave fronts overcomes these limitations. We built an optimized 3D USCT, realizing for the first time the full benefits of a 3D system. The point spread function could be shown to be nearly isotropic in 3D, to have very low spatial variability and fit the predicted values. The contrast of the phantom images is very satisfactory in spite of imaging with a sparse aperture. The resolution and imaged details of the reflectivity reconstruction are comparable to a 3 T MRI volume. Important for the obtained resolution are the simultaneously obtained results of the transmission tomography. The KIT 3D USCT was then tested in a pilot study on ten patients. The primary goals of the pilot study were to test the USCT device, the data acquisition protocols, the image reconstruction methods and the image fusion techniques in a clinical environment. The study was conducted successfully; the data acquisition could be carried out for all patients with an average imaging time of six minutes per breast. The reconstructions provide promising images. Overlaid volumes of the modalities show qualitative and quantitative information at a glance. This paper gives a summary of the involved techniques, methods, and first results.

Increasing interest in multimodal breast cancer diagnosis has led to the development of methods for MRI to X-ray mammography registration. The severe breast deformation in X-ray mammography is often tackled by biomechanical models, yet there is no common consensus in literature about the required complexity of the deformation model and the simulation strategy. We present for the first time an automated patient-specific biomechanical model based image registration of MRI to digital breast tomosynthesis (DBT). DBT provides three-dimensional information of the compressed breast and as such drives the registration by a volume similarity metric. We compare different simulation strategies and propose a patient-specific optimization of simulation and model parameters. The average three-dimensional breast overlap measured by Dice coefficient of DBT and registered MRI improves for four analyzed subjects by including the estimation of unloaded state, simulation of gravity, and a concentrated pull force that mimics manual positioning of the breast on the plates from 88.1% for a mere compression simulation to 93.1% when including all our proposed simulation steps, whereas additional parameter optimization further increased the value to 94.4%.

Increasing interest in multimodal breast cancer diagnosis has led to the development of methods for MRI to X-ray mammography registration to provide direct correlation of modalities. The severe breast deformation in X-ray mammography is often tackled by biomechanical models, which however have not yet brought the registration accuracy to a clinically applicable level. We present a novel registration approach of MRI to X-ray tomosynthesis. Tomosynthesis provides three-dimensional information of the compressed breast and as such has the ability to open new possibilities in the registration of MRI and X-ray data. By bundling the 3D information from the tomosynthesis volume with the 2D projection images acquired at different measuring angles, we provide a correlation between the registration error in 3D and 2D and evaluate different 3D- and 2D-based similarity metrics to drive the optimization of the automated patient-specific registration approach. From the preliminary study of four analysed patients we found that the projected registration error is in general larger than the 3D error in case of small registration errors in the cranio-caudal direction. Although both image shape and intensitybased 2D similarity metrics showed a clear correlation with the 2D registration error at different projection angles, metrics that relied on the combined 2D and 3D information yielded in most of the cases the minimal registration error and as such had better performance than similarity metrics that rely only on the shape similarity of volumes.

Ultrasound Computer Tomography (USCT) is a promising breast imaging modality under development. Comparison to a standard method like mammography is essential for further development. Due to significant differences in image dimensionality and compression state of the breast, correlating USCT images and X-ray mammograms is challenging. In this paper we present a 2D/3D registration method to improve the spatial correspondence and allow direct comparison of the images. It is based on biomechanical modeling of the breast and simulation of the mammographic compression. We investigate the effect of including patient-specific material parameters estimated automatically from USCT images. The method was systematically evaluated using numerical phantoms and in-vivo data. The average registration accuracy using the automated registration was 11.9mm. Based on the registered images a method for analysis of the diagnostic value of the USCT images was developed and initially applied to analyze sound speed and attenuation images based on X-ray mammograms as ground truth. Combining sound speed and attenuation allows differentiating lesions from surrounding tissue. Overlaying this information on mammograms, combines quantitative and morphological information for multimodal diagnosis.

Due to their different physical origin, X-ray mammography and Magnetic Resonance Imaging (MRI) provide complementary diagnostic information. However, the correlation of their images is challenging due to differences in dimensionality, patient positioning and compression state of the breast. Our automated registration takes over part of the correlation task. The registration method is based on a biomechanical finite element model, which is used to simulate mammographic compression. The deformed MRI volume can be compared directly with the corresponding mammogram. The registration accuracy is determined by a number of patient-specific parameters. We optimize these parameters--e.g. breast rotation--using image similarity measures. The method was evaluated on 79 datasets from clinical routine. The mean target registration error was 13.2mm in a fully automated setting. On basis of our results, we conclude that a completely automated registration of volume images with 2D mammograms is feasible. The registration accuracy is within the clinically relevant range and thus beneficial for multimodal diagnosis.

Computer aided diagnosis (CAD) of breast cancer is mainly focused on monomodal applications. Here we present a fully automated multimodal CAD, which uses patient-specific image registration of MRI and two-view X-ray mammography. The image registration estimates the spatial correspondence between each voxel in the MRI and each pixel in cranio-caudal and mediolateral-oblique mammograms. Thereby we can combine features from both modalities. As a proof of concept we classify fixed regions of interest (ROI) into normal and suspect tissue. We investigate the classification performance of the multimodal classification in several setups against a classification with MRI features only. The average sensitivity of detecting suspect ROIs improves by approximately 2% when combining MRI with both mammographic views compared to MRI-only detection, while the specificity stays at a constant level. We conclude that automatically combining MRI and X-ray can enhance the result of a breast CAD system.

In our first clinical study with a full 3D Ultrasound Computer Tomography (USCT) system patient data was acquired in eight minutes for one breast. In this paper the patient movement during the acquisition was analyzed quantitatively and as far as possible corrected in the resulting images. The movement was tracked in ten successive reflectivity reconstructions of full breast volumes acquired during 10 s intervals at different aperture positions, which were separated by 41 s intervals. The mean distance between initial and final position was 2.2 mm (standard deviation (STD) ± 0.9 mm, max. 4.1 mm, min. 0.8 mm) and the average sum of all moved distances was 4.9 mm (STD ± 1.9 mm, max. 8.8 mm, min. 2.7 mm). The tracked movement was corrected by summing successive images, which were transformed according to the detected movement. The contrast of these images increased and additional image content became visible.

Ultrasound Computer Tomography (USCT) is a promising new imaging method for breast cancer diagnosis. We developed a 3D USCT system and tested it in a pilot study with encouraging results: 3D USCT was able to depict two carcinomas, which were present in contrast enhanced MRI volumes serving as ground truth. To overcome severe differences in the breast shape, an image registration was applied. We analyzed the correlation between average sound speed in the breast and the breast density estimated from segmented MRIs and found a positive correlation with R=0.70. Based on the results of the pilot study we now carry out a successive clinical study with 200 patients. For this we integrated our reconstruction methods and image post-processing into a comprehensive workflow. It includes a dedicated DICOM viewer for interactive assessment of fused USCT images. A new preview mode now allows intuitive and faster patient positioning. We updated the USCT system to decrease the data acquisition time by approximately factor two and to increase the penetration depth of the breast into the USCT aperture by 1 cm . Furthermore the compute-intensive reflectivity reconstruction was considerably accelerated, now allowing a sub-millimeter volume reconstruction in approximately 16 minutes. The updates made it possible to successfully image first patients in our ongoing clinical study.

Ultrasound Computer Tomography (USCT), developed at KIT, is a promising new imaging system for breast cancer diagnosis, and was successfully tested in a pilot study. The 3D USCT II prototype consists of several hundreds of ultrasound (US) transducers on a semi-ellipsoidal aperture. Spherical waves are sequentially emitted by individual transducers and received in parallel by many transducers. Reflectivity volumes are reconstructed by synthetic aperture focusing (SAFT). However, straight forward SAFT imaging leads to blurred images due to system imperfections. We present an extension of a previously proposed approach to enhance the images. This approach includes additional a priori information and system characteristics. Now spatial phase compensation was included. The approach was evaluated with a simulation and clinical data sets. An increase in the image quality was observed and quantitatively measured by SNR and other metrics.

Rationale and objectives To evaluate the semi-automatic image registration accuracy of X-ray-mammography (XR-M) with high-resolution high-field (3.0 T) MR-mammography (MR-M) in an initial pilot study. Material and methods MR-M was acquired on a high-field clinical scanner at 3.0 T (T1-weighted 3D VIBE ± Gd). XR-M was obtained with state-of-the-art full-field digital systems. Seven patients with clearly delineable mass lesions >10 mm both in XR-M and MR-M were enrolled (exclusion criteria: previous breast surgery; surgical intervention between XR-M and MR-M). XR-M and MR-M were matched using a dedicated image-registration algorithm allowing semi-automatic non-linear deformation of MR-M based on finite-element modeling. To identify registration errors (RE) a virtual craniocaudal 2D mammogram was calculated by the software from MR-M (with and w/o Gadodiamide/Gd) and matched with corresponding XR-M. To quantify REs the geometric center of the lesions in the virtual vs. conventional mammogram were subtracted. The robustness of registration was quantified by registration of X-MRs to both MR-Ms with and w/o Gadodiamide. Results Image registration was performed successfully for all patients. Overall RE was 8.2 mm (1 min after Gd; confidence interval/CI: 2.0–14.4 mm, standard deviation/SD: 6.7 mm) vs. 8.9 mm (no Gd; CI: 4.0–13.9 mm, SD: 5.4 mm). The mean difference between pre- vs. post-contrast was 0.7 mm (SD: 1.9 mm). Conclusion Image registration of high-field 3.0 T MR-mammography with X-ray-mammography is feasible. For this study applying a high-resolution protocol at 3.0 T, the registration was robust and the overall registration error was sufficient for clinical application.

Breast cancer is the most common cancer among women. The established screening method to detect breast cancer is X-ray mammography. Additionally, MRI is used for diagnosis in clinical routine. Due to complementary diagnostic information, both modalities are often read in combination. Yet, the correlation is challenging due to different dimensionality of images and different patient positioning. In this paper, we describe a method to fuse X-ray mammograms with DCE-MRI. The present study was conducted to evaluate the feasibility of the approach.For the combination of information from both modalities, the images have to be registered using a compression simulation based on a patient-specific biomechanical model. The registered images can be compared directly. The contrast enhancement in the DCE-MRI volume is evaluated using parametric enhancement maps. A projection image of the contrast enhancement is created. The image fusion combines it with X-ray mammograms for intuitive multimodal diagnosis.The image fusion was evaluated using 11 clinical datasets. For 10 of 11 datasets, a good accuracy of the image registration was achieved. The overlap of contrast-enhanced regions with marked lesions in the mammogram is 61%. Lesions are clearly differentiable from surrounding tissue by the DCE-MRI projection in 10 of 11 cases.The described preliminary results are promising, thus we expect the visualization of quantitative information from dynamic MRI together with mammograms to be beneficial for multimodal diagnosis. Because of the use of clinical standard modalities, no additional image acquisition is needed.

Computer aided detection CADe of breast cancer is mainly focused on monomodal applications. We propose an automated multimodal CADe approach, which uses patient-specific image registration of MRI and X-ray mammography to estimate the spatial correspondence of tissue structures. Then, based on the spatial correspondence, features are extracted from both MRI and X-ray mammography. As proof of principle, distinct regions of interest ROI were classified into normal and suspect tissue. We investigated the performance of different classifiers, compare our combined approach against a classification with MRI features only and evaluate the influence of the registration error. Using the multimodal information, the sensitivity for detecting suspect ROIs improved by 7i¾?% compared to MRI-only detection. The registration error influences the results: using only datasets with a registration error below $$10\,mm$$, the sensitivity for the multimodal detection increases by 10i¾?% to a maximum of 88i¾?%, while the specificity remains constant. We conclude that automatically combining MRI and X-ray can enhance the result of a CADe system.

3D Ultrasound Computer Tomography (USCT) is a new imaging method for breast cancer diagnosis. In the current state of development it is essential to correlate USCT with a known imaging modality like MRI to evaluate how different tissue types are depicted. Due to different imaging conditions, e.g. with the breast subject to buoyancy in USCT, a direct correlation is demanding. We present a 3D image registration method to reduce positioning differences and allow direct side-by-side comparison of USCT and MRI volumes. It is based on a two-step approach including a buoyancy simulation with a biomechanical model and free form deformations using cubic B-Splines for a surface refinement. Simulation parameters are optimized patient-specifically in a simulated annealing scheme. The method was evaluated with in-vivo datasets resulting in an average registration error below 5mm. Correlating tissue structures can thereby be located in the same or nearby slices in both modalities and three-dimensional non-linear deformations due to the buoyancy are reduced. Image fusion of MRI volumes and USCT sound speed volumes was performed for intuitive display. By applying the registration to data of our first in-vivo study with the KIT 3D USCT, we could correlate several tissue structures in MRI and USCT images and learn how connective tissue, carcinomas and breast implants observed in the MRI are depicted in the USCT imaging modes.

3D Ultrasound Computer Tomography (3D USCT) promises reproducible high-resolution images for early detection of breast tumors. The KIT prototype provides three different modalities: reflectivity, speed of sound, and attenuation. The reflectivity images are reconstructed using a Synthetic Aperture Focusing Technique (SAFT) algorithm. For high-resolution re ectivity images, with spatially homogeneous reflectivity, attenuation correction is necessary. In this paper we present a GPU accelerated attenuation correction for 3D USCT and evaluate the method by means of image quality metrics; i.e. absolute error, contrast and spatially homogeneous reflectivity. A threshold for attenuation correction was introduced to preserve a high contrast. Simulated and in-vivo data were used for analysis of the image quality. Attenuation correction increases the image quality by improving spatially homogeneous reflectivity by 25 %. This leads to a factor 2.8 higher contrast for in-vivo data.

aDepartment of Neuroradiology, University of Erlangen-Nurnberg, Schwabachanlage 6, D-91054, Germany bDepartment of Radiology, Division of Molecular and Gender Imaging, Medical University Vienna, Wahringer Gurtel 18–20, A-1090, Vienna, Austria c Karlsruhe Institute of Technology (KIT), Institute for Data Processing and Electronics, Postfach 3640, D-76021 Karlsruhe, Germany d Institute of Diagnostic and Interventional Radiology I, Friedrich-Schiller-University Jena, Erlanger Allee 101, D-07740 Jena, Germany

In a first pilot study with 3D Ultrasound Computer Tomography especially the speed of sound images of the breast showed promising results for breast cancer detection. Yet, the resolution of transmission tomography in our system is limited in comparison to the reflectivity volumes. In this paper we describe a setup for an improved device overcoming this limitation. An optimized geometry of the transducers in a sparse distribution improves both the contrast in reflection and contrast and resolution in transmission tomography by nearly an order of magnitude. Furthermore data acquisition is accelerated from 10 to less than 2 minutes. The derived methods, simulation, and measuring results are described.

Purpose 4D co-registration of X-ray- and MR-mammograms (XM and MM) is a new method of image fusion. The present study aims to evaluate its clinical feasibility, radiological accuracy, and potential clinical value. Methods XM and MM of 25 patients were co-registered. Results were evaluated by a blinded reader. Results Precision of the 4D co-registration was “very good” (mean-score [ms]=7), and lesions were “easier to delineate” (ms=5). In 88.8%, “relevant additional diagnostic information” was present, accounting for a more “confident diagnosis” in 76% (ms=5). Conclusion 4D co-registration is feasible, accurate, and of potential clinical value.

An essential processing step for comparison of Ultrasound Computer Tomography images to other modalities, as well as for the use in further image processing, is to segment the breast from the background. In this work we present a (semi-) automated 3D segmentation method which is based on the detection of the breast boundary in coronal slice images and a subsequent surface fitting. The method was evaluated using a software phantom and in-vivo data. The fully automatically processed phantom results showed that a segmentation of approx. 10% of the slices of a dataset is sufficient to recover the overall breast shape. Application to 16 in-vivo datasets was performed successfully using semi-automated processing, i.e. using a graphical user interface for manual corrections of the automated breast boundary detection. The processing time for the segmentation of an in-vivo dataset could be significantly reduced by a factor of four compared to a fully manual segmentation. Comparison to manually segmented images identified a smoother surface for the semi-automated segmentation with an average of 11% of differing voxels and an average surface deviation of 2mm. Limitations of the edge detection may be overcome by future updates of the KIT USCT system, allowing a fully-automated usage of our segmentation approach.

A promising candidate for improved imaging of breast cancer is ultrasound computer tomography (USCT). The aim of this work was to design a new aperture for our full 3D USCT which extends the properties of the current aperture to a larger ROI fitting the buoyant breast in water and decreasing artifacts in transmission tomography. The optimization resulted in a larger opening angle of the transducers, a larger diameter of the aperture and an approximately homogeneous distribution of the transducers, with locally random distances. The developed optimization methods allow us to automatically generate an optimized aperture for given diameters of apertures and transducer arrays, as well as quantitative comparison to other arbitrary apertures. Thus, during the design phase of the next generation KIT 3D USCT, the image quality can be balanced against the specification parameters and given hardware and cost limitations. The methods can be applied for general aperture optimization, only limited by the assumptions of a hemispherical aperture and circular transducer arrays.

Ultrasound Computer Tomography (USCT) is a promising modality for breast imaging. We developed and tested the first full 3D USCT system aimed at in-vivo imaging. It is based on approx. 2000 ultrasound transducers surrounding the breast within a water bath. From the acquired signal data, reflectivity, attenuation and sound speed images are reconstructed. In a first in-vivo study we imaged ten patients and compared them to MRI images. To overcome the considerably different breast positioning in both imaging methods, an image registration and image fusion based on biomechanical modeling of the buoyancy effect and surface-based refinement was applied. The resulting images are promising: compared with the MRI ground truth, similar tissue structures can be identified. While reflection images seem to image even small structures, sound speed imaging seems to be the best modality for detecting cancer. The registration of both imaging methods allows browsing the volume images side by side and enables recognition of correlating tissue structures. The first in-vivo study was successfully completed and encourages for a second in-vivo study with a considerably larger number of patients, which is currently ongoing.

The KIT 3D USCT was tested in a pilot study on ten patients. The primary goals of the pilot study were to test the USCT device, the data acquisition protocols, the image reconstruction methods and the image fusion techniques in a clinical environment. The study was conducted successfully; the data acquisition could be carried out for all patients with an average imaging time of six minutes per breast. First reconstructions provide promising images. Overlaid volumes of the modalities show qualitative and quantitative information at a glance. The results led to further optimization of the system and the data acquisition protocol.

Ultrasound Computer Tomography (USCT) is a promising 3D modality for early breast cancer detection, which is expected to provide quantitative imaging. The aim of this paper is to evaluate the quantitative diagnostic value of the USCT images, i.e. sound speed and attenuation images, using X-ray mammograms as ground truth. For this purpose we applied our 2D/3D registration method, which is based on biomechanical modeling of the breast. Mammograms were segmented into fatty, glandular and tumorous tissue. For each tissue, the average sound speed and attenuation in the corresponding USCT images was calculated. Tumorous tissue could be separated from fatty and glandular tissue using a fixed absolute sound speed threshold in all regarded datasets. By combining sound speed and attenuation, the separation between fatty and glandular tissue could be improved. By overlaying sound speed and attenuation information on the mammogram, quantitative and morphological information can be combined for multimodal diagnosis. This may benefit early breast cancer detection in future.

Ultrasound Computer Tomography is an upcoming imaging modality for early breast cancer detection. For evaluation of the method, comparison with the standard method X-ray mammography is of strongest interest. To overcome the significant differences in dimensionality and compression state of the breast, in earlier work a registration method based on biomechanical modeling of the breast was proposed. However only homogeneous models could be applied, i.e. inner structures of the breast were neglected. In this work we extend the biomechanical modeling of the breast by estimating patient-specific tissue parameters automatically from the speed of sound volume. Two heterogeneous models are proposed modeling a quadratic and an exponential relationship between speed of sound and tissue stiffness. The models were evaluated using phantom images and clinical data. The size of all lesions is better preserved using heterogeneous models, especially using an exponential relationship. The presented approach yields promising results and gives a physical justification to our registration method. It can be considered as a first step towards a realistic modeling of the breast.

Summary A promising candidate for imaging of breast cancer is ultrasound computer tomography (USCT). The main advantages of a USCT system are simultaneous recording of reproducible reflection, attenuation and speed of sound volumes, high image quality, and fast data acquisition. The here presented 3D USCT prototype realizes for the first time the full potential of such a device. It is ready for a clinical study. Full volumes of a breast can be acquired in four minutes. In this paper images acquired with a clinical breast phantom are presented. The resolution and imaged details of the reflectivity reconstruction are comparable to a 3 tesla MRI volume of the phantom. Image quality and resolution is isotropic in all three dimensions, confirming the successful implementation experimentally.

We designed and built a 3D ultrasound computer tomography (USCT) device with a nearly isotropic and spatially invariant 3D point spread function, to be tested in a clinical study. The objective of this work was to image two healthy volunteers and to evaluate the USCT volumes in comparison to corresponding Magnetic Resonance Images (MRI). The here presented volumes are reflectivity images generated with 3D synthetic aperture focusing technique. The volunteers were imaged with different parameterizations of the data acquisition. The data acquisition time was between four and twelve minutes. For both volunteers we found that the breast surface and inner structures are clearly shown in the USCT volume and fit the structures given by the MRI.

We have developed a three-dimensional ultrasound computer tomography system (3D USCT) for early breast cancer diagnosis. The method gives reproducible volume images of the female breast in 3D. The optimized aperture and transducer array systems show at the used low ultrasound frequency of 2.5 MHz a very high image quality. In contrast to other methods our system has a nearly isotropic and spatially invariant 3D point spread function (PSF) with a resolution of 240 11m as measured with a 70 11m AI bond wire. By simulated spectra including the experimentally measured noise of transmission tomography it could be shown that structures down to 4 mm could be reconstructed in speed of sound images. The reconstruction of the 3D images in reflection tomography could be accelerated by the use of the multi-core structure of PCs and eight graphical processor units by a factor of 94. For a reconstruction of the reflectivity with 64 layers of 10242 pixels we reduce the computing time from 33 hours to about 21 minutes. In a first clinical study and the images of two healthy probands the observed structures in breasts due to 3D USCT are comparable to images obtained with a clinical MRT.

Ultrasound Computer Tomography (USCT) is an upcoming modality for early breast cancer diagnosis, which provides morphological as well as quantitative imaging. In order to compare USCT images to the standard modality X-ray mammography, a 2D/3D registration has to be applied. To analyze the relevance of sound speed images as a quantitative imaging method for tissue characterization, the aim of this paper is to quantify sound speed values of different types of tissue using mammograms as ground truth. Mammograms are segmented and classified into fat, glandular and tumorous tissue. For each tissue class the average sound speed in the registered sound speed image is calculated. The mean absolute sound speed was 1457 m/s for regions segmented as fatty tissue, 1470 m/s for glandular and 1509 m/s for tumorous tissue. For all ten datasets, the sound speed in tumorous tissue was significantly higher than in glandular and fatty tissue. Also glandular and fatty tissue could be separated easily by the absolute sound speed values. By color-coding sound speed, quantitative information from USCT and morphological information from X-ray mammography are fused for combined diagnosis. We believe this method will help radiologists in gaining experience in the reading of USCT images. The combination of diagnostic information is likely to be beneficial to early breast cancer detection.

Breast cancer is the most common cancer among women. The established screening method to detect breast cancer in an early state is X-ray mammography. However, X-ray frequently provides limited contrast of tumors located within glandular tissue. A new imaging approach is Ultrasound Computer Tomography generating threedimensional volumes of the breast. Three different images are available: reflectivity, attenuation and speed of sound. The correlation of USCT volumes with X-ray mammograms is of interest for evaluation of the new imaging modality as well as for a multimodal diagnosis. Yet, both modalities differ in image dimensionality, patient positioning and deformation state of the breast. In earlier work we proposed a methodology based on Finite Element Method to register speed of sound images with the according mammogram. In this work, we enhanced the methodology to register all three image types provided by USCT. Furthermore, the methodology is now completely automated using image similarity measures to estimate rotations in datasets. A fusion methodology is proposed which combines the information of the three USCT image types with the X-ray mammogram via semitransparent overlay images. The evaluation was done using 13 datasets from a clinical study. The registration accuracy was measured by the displacement of the center of a lesion marked in both modalities. Using the automated rotation estimation, a mean displacement of 10.4 mm was achieved. Due to the clinically relevant registration accuracy, the methodology provides a basis for evaluation of the new imaging device USCT as well as for multimodal diagnosis.

X-ray mammography (XRM) and Magnetic Resonance Imaging (MRI) are likely to provide complementary diagnostic information for early breast cancer detection. However, topographic correlation of both modalities is challenging due to different dimensionality of images, patient positioning and compression state of the breast. In this paper we present an automated registration method, which allows prediction of the position of a lesion in the contrary modality. It is based on a FEM simulation mimicking the mammographic compression and is carried out using a patient-specific biomechanical model. An intensity-based optimization of the registration parameters is proposed to incorporate with the clinical variability of datasets. After registration, the position of a point of interest can be estimated within the three-dimensional MRI volume based on two mammograms acquired from different projection angles. The method was evaluated with 47 datasets from clinical routine. The mean registration error for localizing a lesion in the 3D MRI volume was 14.3 mm. The automatic registration method enables localization of e.g. microcalcifications which are only visible in XRM, within the corresponding MRI volume. It is therefore likely to assist radiologists in multimodal diagnosis.

Breast cancer is the most common cancer among women. The established screening method to detect breast cancer is X-ray mammography. However, X-ray frequently provides poor contrast of tumors located within glandular tissue. In this case, additional modalities like MRI are used for diagnosis in clinical routine. A new imaging approach is Ultrasound Computer Tomography, generating three-dimensional speed of sound images. High speed of sound values are expected to be an indicator of cancerous structures. Therefore, the combination of speed of sound images and X-ray mammograms may benefit early breast cancer diagnosis. In previous work, we proposed a method based on Finite Elements to automatically register speed of sound images with the according mammograms. The FEM simulation overcomes the challenge that X-ray mammograms show two-dimensional projections of a deformed breast whereas speed of sound images render a three-dimensional undeformed breast in prone position. In this work, 15 datasets from a clinical study were used for further evaluation of the registration quality. The quality of the registration was measured by the displacement of the center of a lesion marked in both modalities. We found a mean displacement of 7.1 mm. For visualization, an overlay technique was developed, which displays speed of sound information directly on the mammogram. Hence, the methodology provides a good basis for multimodal diagnosis using mammograms and speed of sound images. It proposes a guidance tool for radiologists who may benefit from the combined information.

Breast cancer is the most common type of cancer among women in Europe and North America. The established screening method to detect breast cancer is X-ray mammography, although X-ray frequently provides poor contrast for tumors located within glandular tissue. A new imaging approach is Ultrasound Tomography generating three-dimensional speed of sound images. This paper describes a method to evaluate the clinical applicability of three-dimensional speed of sound images by automatically registering the images with the corresponding X-ray mammograms. The challenge is that X-ray mammograms show two-dimensional projections of a deformed breast whereas speed of sound images render a three-dimensional undeformed breast in prone position. This conflict requires estimating the relation between deformed and undeformed breast and applying the deformation to the three-dimensional speed of sound image. The deformation is simulated based on a biomechanical model using the finite element method. After simulation of the compression, the contours of the X-ray mammogram and the projected speed of sound image overlap congruently. The quality of the matching process was evaluated by measuring the overlap of a lesion marked in both modalities. Using four test datasets, the evaluation of the registration resulted in an average tumor overlap of 97%. The developed registration provides a basis for systematic evaluation of the new modality of three-dimensional speed of sound images, e.g. allows a greater understanding of tumor depiction in these new images.

At Forschungszentrum Karlsruhe a 3D ultrasound computer tomograph (USCT) for breast cancer diagnosis is currently under development. For many applications, i.e. reconstruction of speed of sound maps, signal denoising,signal compression and calibration, it is necessary to detect pulses and their parameters (center frequency, bandwidth factor, time of arrival, phase and amplitude) accurately and robustly. The pulse detection is demanding due to low signal-to-noise ratios (SNR) caused by unfocused pulses from single emitters. Besides that angle dependent pulse shapes result in ultrasonic echoes which are similar in their center frequency but vary strongly in their bandwidth factor. Additionally, in sum 3.5 million A-scans (20 GB) are acquired, so that the pulse detection has to be fast and efficient. This is achieved by using a fast pre-classifler in order to separate the ultrasonic echoes from the non-white system noise of our system. The detected echoes are then passed individually to a parameter estimation method to determine pulse parameters accurately. An analysis of several classifiers resulted in an alternating decision tree which is both fast and accurate. Classification performance of 95% could be achieved as well as robust parameter estimation with non-white system noise if the SNR is larger than 3 dB. A comparative image reconstruction resulted in significantly sharper images.

In previous work we optimized the aperture of our 3D Ultrasound Computer Tomography (USCT) system with emphasis on reflection tomography. Based on the promising clinical results with speed of sound and attenuation images, the next generation aperture will be upgraded to contain also optimization for transmission tomography. The main changes to be implemented in aperture, transducers, and transducer arrays are: (1) Overall 3D aperture: due to the shape of the buoyant breast a simpler hemispherical aperture can be applied. (2) The diameter of the aperture will be increased and the diameter of the transducers will be decreased for further homogenization of the illumination. (3) The disjunctive sampling of the transducers will be increased and the transducers will be distributed randomly to enhance the uniformity of transmission tomography. (4) Transducers will be connected both as emitters and receivers to decrease the need for mechanical movement of the aperture.