Search

Praziquantel and Syloid 244 FP (amorphous silicon dioxide) were ground in a vibrational mill in standard conditions (15 or 30 min at 25 Hz). Amorphous solid dispersions were obtained in a very short grinding time (15 min), as testified by DSC, PXRD and ESEM analyses. Samples ground at 15 min and 30 min showed the presence of the same degradation product, as was evident from UPLC, MS and NMR analyses. This short paper brings to light the tremendous lattice de-structuration ability of Syloid 244 FP upon grinding toward Praziquantel as well as its detrimental influence on promoting chemical degradation through ring opening and oxidation.

Bacterial infections represent an important drawback in the orthopaedic field, as they can develop either immediately after surgery procedures or after some years. Specifically, in case of implants, they are alleged to be troublesome as their elimination often compels a surgical removal of the infected implant. A possible solution strategy could involve a local coating of the implant by an antibacterial system, which requires to be easily applicable, biocompatible and able to provide the desired release kinetics for the selected antibacterial drug. Thus, this work focusses on a biphasic system made up by a thermo-reversible gel matrix (Poloxamer 407/water system) hosting a dispersed phase (PLGA micro-particles), containing a model antibacterial drug (vancomycin hydrochloride). In order to understand the key parameters ruling the performance of this delivery system, we developed a mathematical model able to discriminate the drug diffusion inside micro-particles and within the gel phase, eventually providing to predict the drug release kinetics. The model reliability was confirmed by fitting to experimental data, proposing as a powerful theoretical approach to design and optimize such in situ delivery systems.

Praziquantel (PZQ) is the first line drug for the treatment of schistosome infections and is included in the WHO Model List of Essential Medicines for Children. In this study, the association of mechanochemical activation (MA) and the spray congealing (SC) technology was evaluated for developing a child-friendly PZQ dosage form, with better product handling and biopharmaceutical properties, compared to MA materials. A 1:1 by wt PZQ&mdash, Povidone coground&mdash, was prepared in a vibrational mill under cryogenic conditions, for favoring amorphization. PZQ was neat ground to obtain its polymorphic form (Form B), which has an improved solubility and bioactivity. Then, activated PZQ powders were loaded into microparticles (MPs) by the SC technology, using the self-emulsifying agent Gelucire&reg, 50/13 as a carrier. Both, the activated powders and the corresponding loaded MPs were characterized for morphology, wettability, solubility, dissolution behavior, drug content, and drug solid state (Hot Stage Microscopy (HSM), Differential Scanning Calorimetry (DSC), X-Ray Powder Diffraction Studies (PXRD), and FT-IR). Samples were also in vitro tested for a comparison with PZQ against Schistosoma mansoni newly transformed schistosomula (NTS) and adults. MPs containing both MA systems showed a further increase of biopharmaceutical properties, compared to the milled powders, while maintaining PZQ bioactivity. MPs containing PZQ Form B represented the most promising product for designing a new PZQ formulation.

Praziquantel (PZQ) is an inexpensive, low toxicity BCS II class anthelmintic drug used for the treatment of neglected tropical diseases. In earlier papers a mechanochemical activation has been used to induce physical transformations on the drug which would ameliorate its solubility and hence its bioavailability and a systematic study of the effects of varying temperature, frequency and time of milling on drug melting enthalpy and drug recovery was given. In this communication, the focus is on the degradation products that are formed during this mechanical treatment of Praziquantel. In the cogrinding process with povidone and crospovidone several degradation products are formed. Different degradation products are formed, which depend on the type of polymer rather than the process conditions. Two of the most prominent degradation products were identified and their structure proposed on the basis of information obtained from GC-MS, UPLC-MS and 1H NMR techniques.

Praziquantel is an antiparasitic drug used for decades. Currently, the praziquantel commercial preparation is a racemic mixture, in which only the levo-enantiomer possesses anthelmintic activity. The knowledge of its properties in the solid state and other chemical-physical properties is necessary for improving its efficacy and applications. Drug solid dispersions were prepared with calcium carbonate at 1:5 drug to excipient weight ratio by solvent evaporation method. Then, the modification of the crystal structure of the racemic polymorph of praziquantel in presence of calcium carbonate has been studied by means of several analytical techniques (DSC, TGA, XRD, SEM, FTIR, Raman spectroscopy and chiral liquid chromatography). This study has been completed with atomistic calculations based on empirical interatomic force fields and quantum mechanics methods applied to the crystal structure of praziquantel and of intermolecular interactions. The results evidenced that calcium carbonate provoked a conformational change in the praziquantel molecule yielding the formation of different polymorphs of praziquantel crystal. These alterations were not observed replacing calcium carbonate with colloidal silica as excipient in the solid dispersion.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. The aim of the research was to investigate three ‘‘critical steps’’ that deserve particular attention during the mechanochemical activation of vincamine. The first step consisted in the selection of the best polymeric carrier/most affine stabiliser between linear PVP and NaCMC by using the GRID and the GRID based AutoDock software packages which permit to calculate their surface features and interactions. Moreover, the calculation of the partial and total solubility parameters supported the results obtained by GRID and AutoDock software. Then, after the selection of linear PVP-K30 as the suitable carrier, the influence of process and formulation variables on the amorphisation degree and solubility enhancement was studied, to select the most suitable process conditions and formulation parameters. Subsequently, the best performing samples were widely characterised using XRPD, TEM and SSNMR (including the proton relaxation (1H T1 NMR) time) techniques. These studies highlighted that all the coground samples were nanocrystalline solid dispersions indicating a dramatic difference between the amorphisation capacities of linear PVP-K30 and cross-linked PVP, used in previous analogous experiences. In particular, 13C, 15N and 1H T1 NMR data point to a description of the system as a dispersion of nanocrystals in the polymer. In these dispersions vincamine is in a disordered crystalline state due to extensive interactions and contacts with PVP-K30 but the main hydrogen bonding motif characterising its packing remains. Again, differently from cross-linked PVP, dissolution studies revealed that linear PVP-K30 was able to promote a complete in vitro solubilisation of vincamine in some coground samples. What is more important, by using a linear polymer, drugto- polymer and milling time variables appeared less influent on the solid state and in vitro properties of the composites. Finally, stability studies conducted for a period of 1 year highlighted the high physical stability of the selected samples.

Praziquantel, a BCS II class anthelmintic drug used for the treatment of schistosome infections, was coground in a vibrational mill with different polymers (linear and crosslinked povidone, copovidone and sodium starch glycolate). An explorative analysis of formulation variables (drug-polymer wt ratio and polymer type) and process parameters (type of grinding media, grinding time and frequency) was carried out with the help of an experimental screening design. The influence of the above mentioned factors on three PZQ characteristics (residual crystallinity, water solubility enhancement and drug recovery) was studied. The variation of carrier amount proved to be by far the most important variable affecting all the experimental responses. A lower impact and, in some cases, rather null effect, had the variation of the process variables. All coground systems were characterized by a high amorphous degree and a solubility significantly higher than the API. A very promising product was obtained by processing at 20 Hz for 4 h, using 3 spheres of 15 mm as grinding media, i.e. a coground having a 50% API content, showing a 4.6-fold greater solubility at 20 C than pure praziquantel. This product maintained the same antischistosomal activity of pure API and was both physically and chemically stable for at least 6 months. © 2017 Elsevier B.V. All rights reserved.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Microcrystalline vinpocetine, coground with cross-linked polyvinylpyrrolidone, affords hybrids containing nanosized drug nanocrystals, the size and size distributions of which depend on milling times and drug-to-polymer weight ratios. Using an innovative approach to microstructural characterization, we analyzed wide-angle X-ray total scattering data by the Debye function analysis and demonstrated the possibility to characterize pharmaceutical solid dispersions obtaining a reliable quantitative view of the physicochemical status of the drug dispersed in an amorphous carrier. The microstructural properties derived therefrom have been successfully employed in reconciling the enigmatic difference in behavior between in vitro and in vivo solubility tests performed on nanosized vinpocetine embedded in a polymeric matrix.

In this study, the suitability as rapid release dosage forms for ibuprofen of cylindrically shaped extrudates based on Gelucire 50/13 and Polyethylene glycol 4000 was investigated. Several drug to carrier weight ratios were processed in a small-scale ram extruder at a temperature much lower than the melting point of the binders. Cylindrical extrudates, regular in shape and with a smooth surface were obtained. In the Gelucire 50/13/ibuprofen extrudates, only a slight reduction of drug crystallinity compared to the relative physical blends was found, which in any case, did not affect the stability of the systems. While in the Gelucire case the ibuprofen dissolution was improved even by a little percentage of carrier in the formulation, with Polyethylene glycol 4000 the introduction of additional hydrophilic excipients was found to be necessary to achieve a dissolution rate and extent of dissolution of the drug comparable to those of Gelucire/ibuprofen systems.

An attractive herbal product, softgel capsules containing 10 mg of Echinacea angustifolia lipophilic extract, was given in a single oral administration to 10 human volunteers to perform a pharmacokinetic and immunological study. The plasma concentration of the major constituent was monitored, quantifying at predetermined time points the dodeca-2E,4E,8Z,10E/Z-tetraenoic isobutylamides (tetraene). The plasmatic levels of IL-2, IL-6, IL-8, IL-10 and TNF-a in samples collected before and 24 h after drug administration were analyzed by cytokine assay. The total RNA was extracted from limpho-monocyte isolated from the same blood samples and the same cytokines in terms of gene expression were evaluated. With the help of proper statistical tests the differences between the values obtained at 0 and 24 h were evaluated. Results of pharmacokinetic studies attest an approximately 3.5-fold improvement of tetraene oral bioavailability compared with previously published studies. Dodeca-2E,4E-dienoic acid isobutylamide exerts immunomodulatory effects down-regulating the gene expression and reducing the protein plasmatic levels of pro-inflammatory cytokines such as IL-6, TNF-a and IL-8, and up-regulating the expression of anti-inflammatory molecules as IL-10. Student’s two-sided paired t-test and non-parametric Wilcoxon–Mann–Whitney signed rank test agree in the conclusions about the differences between the ln values at 24 h and corresponding ln values at 0 h.

Loratadine-loaded microspheres were prepared by spray-drying of dispersions, emulsions and suspensions differing in polymeric composition and solvents used. Conventional microspheres were obtained by spray-drying of dispersions composed of chitosan (CM) as only polymer, while composed microspheres were obtained by spray-drying of two-phase systems composed of chitosan and ethylcellulose (EC). Microspheres differed in EC/CM weight ratio (0:1, 1:2 and 1:3) and in loratadine/polymers weight ratio (1:6 and 1:8). The entrapment efficiencies were between 67.9 and 86.1%; less loratadine was entrapped as polymer/drug ratio decreased. In comparison to one-phase systems composed of CM as only polymer, spray-drying of two-phase systems composed of both, CM and EC resulted in improved loratadine entrapment (80.1–86.1%). All microspheres were positively charged, indicating the presence of chitosan at the surface, regardless of the drug content and the type of spray-dried system. The highest zeta-potential was measured for loratadine-free conventional microspheres, consisting of chitosan only (32.7±1.3 mV). Tensile studies showed that both, EC/CM ratio and the type of spray-dried system influenced the bioadhesive properties of the microspheres in a way that the microspheres with higher chitosan content were more bioadhesive and microspheres prepared from suspensions were more bioadhesive than those prepared from emulsions, regardless of the same polymeric composition. The results suggested that the spray-drying method is useful to produce bioadhesive loratadine-loaded microspheres. © 2004 Elsevier B.V. All rights reserved.

In this study, the immunomodulatory effect of a triply standardized Echinacea angustifolia root extract (Polinacea(®)) was evaluated in 10 healthy subjects. Ten ml of syrup containing one hundred mg of extract (corresponding to 4.7 mg of Echinacoside and 8.0mg of a high molecular weight-20,000 Da- polysaccharide) were administered as a herbal syrup once a day for one month. The immunomodulatory effect was evaluated before and after herbal syrup administration evaluating the expression levels of the cytokines IL-2, IL-8, IL-6 and TNF-α. Cytokine expression was studied in lympho-monocytes and in plasma samples measuring the mRNA and protein levels, respectively. The results were analysed by ANOVA and non-parametric Friedman rank sum tests; when possible it was adopted a pair-wise comparisons at different post-treatment times, using the paired t-tests with Holm correction. The correlation between the variations of cytokine plasma levels and the respective mRNA was carried out using a linear regression model. In lympho-monocytes our data indicate the up-regulation of the mRNA levels of IL-2 and IL-8 and the down regulation of the mRNA levels of the pro-inflammatory cytokines TNF-α and IL6. The differential regulation was maximal after 14 days of treatment. IL-2 up-regulation and IL-6 down-regulation were also confirmed at the protein level in plasma. Finally, the up-regulation of the mRNA of IL-2/IL-8 and the down-regulation of IL-6 positively correlated with the protein levels detected in the plasma. In conclusion, this pilot study suggests a relevant role for the standardized Echinacea angustifolia root extract in the control of cytokine expression. This first demonstration of the immuno-modulating activity of Echinacea angustifolia root extract in the healthy subject, supports at least in part the common use of such products as health promoting supplement.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Vincamine is a poorly soluble potent neuroprotector and cerebral vasodilator, used for the treatment for CNS disorders. In some cases, the bioavailability of pure compounds is strongly influenced by the co-administration of other constituents, and in some cases, the so called ‘phytocomplex’ may act as enhancer of absorption of selected phytochemicals. In this paper, the oral bioavailability of vincamine when administered as a standardised Vinca minor L. leaf dry extract rather than pure indole alkaloid is demonstrated to be higher. The chosen alkaloid-enriched and standardised dry extract was widely characterised by means of HPLC–MS, PXRD, DSC, XPS, 13C and 15N solid-state NMR (SSNMR) using pure vincamine as a matter of comparison. Then, the in vitro dissolution performances of the two products and their in vivo bioavailability in rats were evaluated. The sevenfold improvement in oral bioavailability of the dry extract with respect to the pure vincamine was ascribed to interactions between the indole alkaloid and the corollary of ingredients of the dry extract, giving rise to the protonation of the alkaloid vincamine, thus enhancing its dissolution in physiological fluids. Present data demonstrate that alkaloid vincamine administered as a whole plant extract has a higher bioavailability compared to the pure chemical compound.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. In the present research a salt of vincamine, a poorly bioavailable indole alkaloid derived from the leaves of Vinca minor L., was synthesized in the solid state by means of a mechanochemical process employing citric acid as a reagent. The mechanochemical process was adopted as a solvent-free alternative to classical citrate synthetic route that involves the use of solvents. Since the mechanochemical salification is little studied to date and presents the disadvantage of offering a low yield, in this work, the influence of three process and formulation variables on the percentage of vincamine citrate was studied. In particular, the time of mechanical treatment (in planetary mill Fritsch P5) and the amount of citric acid were varied in order to evaluate their effect on the yield of the process, and the introduction of a solid solvent, a common pharmaceutical excipient (sodium carboxymethylcellulose, NaCMC), was considered. Due to the complexity of the resulting samples’ matrix, an appropriate experimental design was employed to project the experimental trials and the influence of the three variables on the experimental response was estimated with the help of a statistical analysis. The experimental response, that is, the yield of the process corresponding to the percentage of vincamine in the protonated form, was unconventionally calculated by means of X-ray photoelectron spectroscopy analysis (XPS). Out of 16 samples, the one with the highest yield was the coground sample containing vincamine and citric acid in a 1:2 molar ratio, treated for 60 min in the presence of NaCMC. Under the above conditions the salification reaction was completed highlighting the importance of a proper selection of process and formulation variables of the mechanochemical salification, and emphasizing the crucial role of the solid solvent in facilitating the salification. The second step of the research encompassed the characterization of the citrate salt obtained by solid excipient assisted mechanochemical salification (SEAMS) in comparison with the vincamine citrate obtained by classical synthetic route. The samples were characterized by, besides XPS, high resolution transmission electron microscopy (HRTEM), X-ray powder diffraction (XRPD), in vitro solubilization kinetics and in vivo oral pilot study in rats. Finally, in order to monitor over time possible disproportionation phenomena, stability studies have been performed by repeating XPS analysis after 8 months. As expected, the the SEAMS-vincamine salt consisted of particles both crystalline and amorphous. The solubilization kinetics was superior to the corresponding salt probably thanks to the favorable presence of the hydrophilic excipient although the two salts were bioequivalent in rats after oral administration. Furthermore, no evidence of disporportionation phenomena in the SEAMSvincamine salt was found after storage. In conclusion, in the case of forming salts of poorly soluble drugs, the SEAMS process may be an interesting alternative to both classical synthetic routes, eliminating the need for solvent removal, and simple neat mechanochemical salification, overcoming the problem of limited process yield.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. The aims of this research were to prepare highly bioavailable binary cogrounds (vincamine–AcDiSol® or PVP-Cl) by means of a mechanochemical process and to study the mediation of each polymer in the induction of physical transformations of the drug. From a set of fifteen cogrounds for each crosslinked polymer, two samples were selected in each group on the basis of the AUC of in vitro dissolution profiles with the help of a statistical comparison. The chosen samples were analysed by means of TEM, XRPD, Raman-spectroscopy/imaging, SSNMR, also including the study of 1H spin–lattice relaxation times. The research encompassed in vivo oral absorption studies in rats, pharmacokinetic analysis and physical stability studies during 1 year. An intimate drug–polymer mixing was found in the coground samples with domain average dimensions smaller than 100A˚ ; this reflected in a remarkable enhancement of the in vitro and in vivo bioavailability. Different disordered states were detected in the coground samples as a function of cogrinding time and the type and amount of polymer used. Though both crosslinked polymers produced a remarkable enhancement of the oral bioavailability, coground systems based on AcDiSol® are preferable in terms of pharmacokinetic performance and physical stability.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. The aim of this research was to prepare helical and cylindrical extrudates by melt extrusion and to evaluate their potential as sustained release dosage form. The systems contained theophylline as water-soluble model drug and microcrystalline wax as thermoplastic binder. The temperature suitable to ensure a successful extrusion process of formulations containing the wax in three different percentages was found to be below the melting point of the excipient. After the production of the extrudates in three different helical shapes (having 2, 3 and 4 blades) and a classical cylindrical shape, the systems were studied by means of X-ray powder diffraction and differential scanning calorimetry to check possible variations of the solid state of the drug during the thermal process. The morphology and chemical composition of the surface of the extrudates were examined by Scanning Electron Microscopy/Energy Dispersive X-ray Microanalysis to evaluate the presence of the drug on the surface of the extrudates and to monitor changes on the aspect of the waxy matrix during dissolution. Then, the different systems were analysed from the in vitro dissolution point of view to study the influence of the shape and of the composition on the drug release. An in vivo pilot study on the best performing system (helix with 3 blades) was carried out on five healthy volunteers and monitoring the intestinal transit by X-ray images. The resulting plasma profiles were analysed by means of a suitable pharmacokinetic analysis. Finally, an ad hoc mathematical model was developed to perform an accurate description of the in vitro release and in vivo performance of the 3-blades helical system.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Purpose Enhancing oral bioavailability of vinpocetine by forming its amorphous citrate salt through a solvent-free mechanochemical process, in presence of micronised crospovidone and citric acid. Methods The impact of formulation and process variables (amount of polymer and citric acid, and milling time) on vinpocetine solubilization kinetics from the coground was studied through an experimental design. The best performing samples were characterized by employing a multidisciplinary approach, involving Differential scanning calorimetry, X-ray diffraction, Raman imaging/spectroscopy, X-ray photoelectron spectroscopy, solid-state NMR spectroscopy, porosimetry and in vivo studies on rats to ascertain the salt formation, their solidstate characteristics and oral bioavailability in comparison to vinpocetine citrate salt (Oxopocetine®). Results The analyses attested that the mechanochemical process is a viable way to produce in absence of solvents vinpocetine citrate salt in an amorphous state. Conclusion From the in vivo studies on rats the obtained salt was four times more bioavailable than its physical mixture and bioequivalent to the commercial salt produced by conventional synthetic process implying the use of solvent.

The aim of this work was to enhance the bioavailability of erythromycin base when administered orally in rainbow trout (Oncorhynchus mykiss). Since erythromycin is normally given in the form of medicated feed, in this study three new types of feed formulation were developed. A self-emulsifying system and two types of double microemulsions (O/W/O) were prepared, characterized and adsorbed on a commercial extruded diet for fish. The emulsified systems were based on saturated polyglycolized glycerides and mono- and diglycerides of medium-chain fatty acids (as oily phase), Tween 80 (as surfactant) and, in the case of double microemulsions, distilled water. The systems differed in percentage composition and for the amount and position of erythromycin in different phases. The three medicated feed were then administered orally by means of a gastric probe to rainbow trout and their relative bioavailability was estimated in comparison with that obtained after oral administration of feed with erythromycin powder. For each medicated feed, 80 fish were tested. Finally, plasma profiles of erythromycin after single administration of medicated feeds were used to predict profiles obtainable by administering once-daily medicated feeds for 7 consecutive days. The results proved that the feeds containing microemulsified erythromycin provided largely superior oral bioavailability and the advantage of obtaining the same efficacy against bacterial infections with a much lower dose of drug.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Significant improvement of solubilization kinetics of poorly soluble vinpocetine was obtained through amechanochemical activation process in presence ofmicronized crospovidone. Drug-to-polymer weight ratio and milling time variables resulted to have statistically significant impacts on the activation of the product. The complete amorphization was obtained in the coground with the highest crospovidone contents (>80% wt), milled for the longest time (180 min). An ad hoc software was then used to calculate the dimensions of the drug crystallites in the samples on the basis of the calorimetric data. The thermal analyses were then accompanied and confirmed by an extensive solid-state characterization, performing X-ray diffraction, Raman imaging/spectroscopy, DRIFT, and SS-NMR spectroscopy, followed by laser diffraction and solubilization kinetics tests. All the analyses agreed on attesting the progressive loosing of crystalline structure of the drug when increasing milling time and amount of polymer in the formulations. This activated status of the drug, which resulted to be homogeneously distributed on the coground sample and stable for at least 1 year, was reflected on favorable solubilization kinetics. The in vivo studies on rats revealed that coground systems promoted a fivefold higher oral bioavailability enhancement in comparison to a commercial formulation (VimpocetinR 5mg Capsules, Pharma)

The relative bioavailability of the major alkamides, dodeca-2E,4E,8Z,10E/Z-tetraenoic acid isobutylamides, from Echinacea purpurea phytotherapeutic lozenges at three different dose levels (0.07, 0.21 and 0.9 mg) was evaluated in a pharmacokinetic study in humans and the possible effects on the immunological system were measured. Alkamides were found to be rapidly absorbed and measurable in plasma 10 min after administration of 0.21 and 0.9 mg lozenges and remained detectable for 3h for the 0.21 mg lozenges and for more then 3h for the 0.9 mg lozenges; 0.07 mg lozenges were measurable 20 min after administration and remained detectable for only 2h after the administration. A significant dose-independent down-regulation of the pro-inflammatory cytokines IL-12p70, IL-8, IL-6, IL-10 and TNF was observed 24h after oral administration. The results of non-compartmental pharmacokinetic analysis revealed that a C(max) of (0.65+/-0.41 ng/ml) was reached at 32 min with the 0.07 mg lozenges, (1.00+/-0.21ng/ml) at 25 min with the 0.21 mg lozenges and (8.88+/-5.89 ng/ml) at 19 with the 0.9mg lozenges. As evidenced by the dose-exposure relationship, no significant departure from dose proportionality was observed, indicating linearity in pharmacokinetics. To get a further insight in pharmacokinetics of dodeca-2E,4E,8Z,10E/Z-tetraenoic isobutylamides a compartmental population pharmacokinetic model was developed applying mixed effect modelling procedure. The results demonstrate that within the dose range studied pharmacokinetics of dodeca-2E,4E,8Z,10E/Z-tetraenoic isobutylamides are linear and that absorption is very rapid (t(1/2)=6 min) with apparently no lag time, thus indicating the possibility that a fraction of the drug is absorbed through the oral mucosa.

Aim of this work was to develop a cylindrical co-extrudate characterised by an in vivo sustained release profile by means of a hot-melt extrusion process. Co-extrudate was made up of two concentric extruded matrices: an inner one having a hydrophilic character, based on polyethylene glycol, and an outer one with lipophilic character, based on microcrystalline wax. Both segments contained theophylline as a model drug. A screening between several devices differing for dimensions (diameter and length) and relative proportions of the inner and outer part was carried out on the basis of their in vitro drug release and the release mechanism was studied by means of a mathematical model. The co-extrudate exhibiting the desired sustained release was selected for in vivo bioavailability studies. In vivo studies confirmed the achievement of the purpose of the research, demonstrating the desired release of theophylline on four healthy volunteers. Accordingly, hot-melt extrusion process is a viable method to produce in a single step co-extrudates showing a sustained release. In addition, the developed mathematical model proved to be a reliable descriptor of the both in vitro and in vivo experimental data.

The purpose of this preliminary study was to investigate the physico-chemical properties of nimesulide precipitated by continuous supercritical antisolvent (SAS) from different organic solvents like acetone, chloroform and dichloromethane at 40 degrees C and 80, 85 and 88 bar, respectively. Scanning electron microscopy, differential scanning calorimetry, X-Ray diffractometry and in vitro dissolution tests were employed to study how the technological process and the solvent nature would affect the final product. SAS-processed nimesulide particles showed dramatic morphological change in crystalline structure if compared to native nimesulide, resulting in needle and thin rods shaped crystals. The solid state analysis showed that using chloroform or dichloromethane as a solvent the drug solid state remained substantially unchanged, whilst if using acetone the applied method caused a transition from the starting form I to the meta-stable form II. So as to identify which process was responsible for this result, nimesulide was further precipitated from the same solvent by conventional evaporation method (RV-sample). On the basis of this comparison, the solvent was found to be responsible for the re-organization into the different polymorphic form and the potential of the SAS process to produce micronic needle shaped particles, with an enhanced dissolution rate if compared to the to the pure drug, was ascertained. Finally, the stability of the nimesulide form II, checked by DSC analysis, was ruled on over a period of 15 months.

Several controlled release systems of drugs have been elaborated using a supercritical fluid process. Indeed, recent techniques using a supercritical fluid as a solvent or as an antisolvent are considered to be useful alternatives to produce fine powders. In this preliminary study, the effect of Supercritical Anti Solvent process (SAS) on the release of theophylline from matrices manufactured with hydroxypropylmethylcellulose (HPMC) was investigated. Two grades of HPMC (HPMC E5 and K100) as carriers were considered in order to prepare a sustained delivery system for theophylline which was used as a model drug. The characterization of the drug before and after SAS treatment, and the coprecipitates with carriers, was performed by X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC). The dissolution rate of theophylline, theophylline-coprecipitates, and matricial tablets prepared with coprecipitates were determined. The physical characterizations revealed a substantial correspondence of the drug solid state before and after supercritical fluid treatment while drug-polymer interactions in the SAS-coprecipitates were attested. The dissolution studies of the matrices prepared compressing the coprecipitated systems showed that the matrices based on HPMC K100 were able to promote a sustained release of the drug. Further, this advantageous dissolution performance was found to be substantially independent of the pH of the medium. The comparison with the matrices prepared with untreated substances demonstrated that matrices obtained with SAS technique can provide a slower theophylline release rate. A new mathematical model describing the in vitro dissolution kinetics was proposed and successfully tested on these systems.

Atenolol is a β-blockers drug commonly used in the prevention of heart diseases. The aim of this work is to improve its bioavailability modifying its particle morphology by using supercritical carbon dioxide as antisolvent agent. Saturation conditions, at different temperatures, for ternary systems made up with carbon dioxide and solutions of atenolol in methanol, ethanol and isopropanol have been investigated using a variable volume cell. The effect of the presence of the active principle on the vapor–liquid equilibrium for the organic solvent–carbon dioxide system have been considered in order to choose the best operative conditions to perform the antisolvent precipitation process. Atenolol was then processed from different solutions (5%, w/w atenolol–methanol; 5%, w/w atenolol–ethanol and 1.65%, w/w atenolol–isopropanol) by sending the streams in a precipitation chamber firstly in counter current and later on in equicurrent. Various characterization analyses have been made on the precipitated powders. It is important to note that the release profiles of the precipitated atenolol show a general enhancement of the dissolution rate, compared to the one of the untreated drug.

The purpose of this study is to evaluate the possibility of developing a cylindrical sustained-release dosage form for theophylline directly by means of a ram extrusion process. In particular, the formulations contained: stearic acid as a low melting binder, morrohydrate lactose and polyethylene glycol 6000 as hydrophilic fillers. The influence of type and percentage of the components was studied considering different parameters such as the time required for 50% of the drug release (t(50%))and the drug diffusion coefficient in the delivery system. The choice of the different formulations to be tested is carried out employing an axial design with constraint domains. The limits of each component were fixed on the basis of preliminary trials. The analysis of the t50% values revealed that the release kinetics is mainly affected by stearic acid and theophylline content, whilst lactose effect is almost negligible. A substantial correspondence between the experimental results and the analysis of the drug release kinetics performed by means of an ad hoc developed mathematical model was found. The proposed mathematical model allows to conclude that wherever the release mechanism is initially ruled by dissolution, then diffusion plays the most important role. (C) 2003 Elsevier B.V. All rights reserved.

In this study, the potential of the spray-drying technique for preparing microspheres able to modify the release profile of carbamazepine was investigated. Low-, medium- and high-molecular-weight chitosan and hydroxypropyl methylcellulose (HPMC) in different drug–polymer ratios were used for the preparation of microspheres. The microspheres, characterized by X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC), were also studied with respect to particle size distribution, drug content and drug release. The results indicated that the entrapment efficiency (EE), as well as carbamazepine release profile, depended on polymeric composition and drug– polymer ratios of the microspheres prepared. The best entrapment efficiencies were obtained when chitosan of low-molecular-weight (CL) or HPMC were used for the microencapsulation. For all types of polymer used, the microspheres with low carbamazepine loading (6.3% w/w) showed better control of drug release than the microspheres with higher drug loadings. The HPMC microspheres showed the slowest carbamazepine release profile with no initial burst effect. Carbamazepine release profiles from ternary systems, carbamazepine–CL–HPMC microspheres, depended mostly on HPMC content and showed similar carbamazepine release profile as CL microspheres when HPMC content was low (9:1 CL–HPMC ratio, w/w). Otherwise, the carbamazepine release from CL–HPMC microspheres was remarkably faster than from either chitosan or HPMC microspheres. The release profile of carbamazepine from the microspheres was highly correlated with the crystalline changes occurring in the matrix.

It is well known that carriers can affect the dissolution of poorly soluble drugs. In this study, our aim was to investigate the dissolution enhancement of carbamazepine solid dispersed or mixed at different loading ratios in crospovidone, polyvinylpyrrolidone, and sodium starch glycolate. The physical state of the drug and the drug-polymer interactions in the solid state were investigated using differential scanning calorimetry (DSC) and x-ray diffraction analysis (XRD). Through the solubilization kinetics and dissolution rates studies, the in vitro drug availability of the systems was evaluated. An improved in vitro dissolution of the drug was obtained in all the binary systems that increased as the polymer content increased.

The preparation of sustained-release pellets by melt pelletisation was investigated in a 10-l high shear mixer and ternary mixtures containing stearic acid as a melting binder, anhydrous lactose as a filler and theophylline as a model drug. A translated Doehlert matrix was applied for the optimisation of process variables and quality control of pellets characteristics. After determination of size distribution, the pellets were characterised with scanning electron microscopy, X-ray photoelectron spectroscopy and porosimetric analysis. Finally, the in vitro release from every single size fraction was evaluated and the release mechanism was analysed. Since the drug release rate decreased when enhancing the pellet size fraction, the 2000-mm fraction, exhibiting a substantially zero-order release, was selected for further in vivo biovailability studies. These data demonstrated that pellets based on the combination of stearic acid and lactose can be used to formulate sustained release pellets for theophylline. © 2000 Elsevier Science B.V. All rights reserved.

For poorly soluble orally administered drugs, the rate of absorption is often controlled by the rate of dissolution of the drug in the gastrointestinal tract. In literature many technological metho...

The objective of this study was to design atenolol tablets with fast in vitro release rates. Different polymers were screened as possible carriers to enhance atenolol dissolution. Binary systems using povidone (PVP), crospovidone (PVP-CL), polyvinilpyrrolidone/vinylacetate (PVP/VA), and Eudragit ® E were prepared. The physical properties of solid dispersions, compared to physical mixtures, were analysed using X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The solubility and the release rate of atenolol from solid dispersions were compared to the drug alone. The influence of various parameters (type of polymer, drug to polymer ratio, pH) on the solubility and dissolution rate of the drug was also evaluated. The results of DSC and X-ray analyses of solid dispersions attested that the drug was always present in a crystalline form in the PVP-CL and Eudragit ® E systems, while with the high content of PVP and PVP/VA an amorphisation of the atenolol was detectable. On the other hand, the diffraction patterns and the DSC thermograms of the physical mixtures revealed that to some extent the drug was always present in a crystalline form. An improvement in solubility and dissolution rate of atenolol with PVP and PVP-CL was obtained.