Search

Sugar-rich diets and poor dental hygiene promote the formation of a biofilm (plaque) that strongly adheres to the dental enamel surface and fosters the evolution of aciduric bacteria. The acid contributes to demineralization of the exterior tooth enamel, which accelerates after the pH drops below a critical value (∼5.5) for extended time periods resulting in the need for restorative procedures. Preventative techniques to alert the dentist and caries-susceptible patients regarding vulnerability to dental decay require a clinical measure of plaque activity. Therefore, there is a need to evaluate the acid production capability of plaque deposits in the pits and fissures of occlusal and interproximal regions. A ratiometric fluorescence pH-sensing device has been developed using an FDA-approved dye and LED excitation. Fluorescein spectral profiles were collected using a spectrometer and analyzed with a spectral unmixing algorithm for calibration over the pH range of 4.5 to 7. An in vivo pilot study on human subjects was performed using a sucrose rinse to accelerate bacterial metabolism and to measure the time-dependent drop in pH. The optical system is relatively immune to confounding factors such as photobleaching, dye concentration, and variation in excitation intensity associated with earlier dye-based pH measurement techniques.

Tooth decay is one of the most common chronic infectious diseases worldwide. Bacteria from the oral biofilm create a local acidic environment that demineralizes the enamel in the caries disease process. By optically imaging plaque pH in pits and fissures and contacting surfaces of teeth, then medicinal therapies can be accurately applied to prevent or monitor the reversal of caries. To achieve this goal, the fluorescence emission from an aqueous solution of sodium fluorescein was measured using a multimodal scanning fiber endoscope (mmSFE). The 1.6-millimeter diameter mmSFE scans 424nm laser light and collects wide-field reflectance for navigational purposes in grayscale at 30 Hz. Two fluorescence channels centered at 520 and 549 nm are acquired and ratiometric analysis produces a pseudo-color overlay of pH. In vitro measurements calibrate the pH heat maps in the range 4.7 to 7.2 pH (0.2 standard deviation). In vivo measurements of a single case study provides informative images of interproximal biofilm before and after a sugar rinse. Post processing a time series of images provides a method that calculates the average pH changes of oral biofilm, replicating the Stephan Curve. These spatio-temporal records of oral biofilm pH can provide a new method of assessing the risk of tooth decay, guide the application of preventative therapies, and provide a quantitative monitor of overall oral health. The non-contact in vivo optical imaging of pH may be extended to measurements of wound healing, tumor environment, and other food processing surfaces since it relies on low power laser light and a US FDA approved dye.

IntroductionTuberculosis (TB) transmission is difficult to measure, and its drivers are not well understood. The effectiveness of infection control measures at healthcare clinics and the most appropriate intervention strategies to interrupt transmission are unclear. We propose a novel approach using clinical, environmental and position-tracking data to study the risk of TB transmission at primary care clinics in TB and HIV high burden settings in sub-Saharan Africa.Methods and analysisWe describe a novel and rapid study design to assess risk factors for airborne TB transmission at primary care clinics in high-burden settings. The study protocol combines a range of different measurements. We will collect anonymous data on the number of patients, waiting times and patient movements using video sensors. Also, we will collect acoustic sound recordings to determine the frequency and intensity of coughing. Environmental data will include indoor carbon dioxide levels (CO2 in parts per million) and relative humidity. We will also extract routinely collected clinical data from the clinic records. The number of Mycobacterium tuberculosis particles in the air will be ascertained from dried filter units using highly sensitive digital droplet PCR. We will calculate rebreathed air volume based on people density and CO2 levels and develop a mathematical model to estimate the risk of TB transmission. The mathematical model can then be used to estimate the effect of possible interventions such as separating patient flows or improving ventilation in reducing transmission. The feasibility of our approach was recently demonstrated in a pilot study in a primary care clinic in Cape Town, South Africa.Ethics and disseminationThe study was approved by the University of Cape Town (HREC/REF no. 228/2019), the City of Cape Town (ID-8139) and the Ethics Committee of the Canton Bern (2019-02131), Switzerland. The results will be disseminated in international peer-reviewed journals.

For adults, electrocardiogram (ECG) has been used for over a century as the method to diagnose the heart's performance as well as one of the key indicators in vital-sign monitoring. Nevertheless, there has been no such a device to monitor fetal ECG (fECG) in spite of high fetus mortality rate due to heart diseases. In this work, we present a novel patch using non-contact electrodes (NCEs) to acquire the abdominal ECG (aECG) of the mother which comprises both fECG and maternal ECG (mECG) and a reference patch on mother's chest to extract mECG. The device is based on a polyimide film with NCEs and circuits, Bluetooth Low Energy (BLE) communication and a flexible Li-polymer battery. A MATLAB algorithm was developed to precisely extract the fECG and mECG using Linear Mean Square (LMS) adaptive filter. The system was characterized and validated using recorded ECG signals and an online database with zero error between R-peaks of stabilized filter outputs and required signals. Therefore, our aECG and mECG patch hold promise to monitor the wellbeing states of both the fetus and mother in the home setting as well as provide data for early diagnoses of heart diseases even before the baby is born.

Blood pressure (BP) is one of the most important monitoring parameters in clinical medicine. For years, the cuff-based sphygmomanometer and the arterial invasive line have been the gold standards for care professionals to assess BP. During the past few decades, the wide spread of the oscillometry-based BP arm or wrist cuffs have made home-based BP assessment more convenient and accessible. However, the discontinuous nature, the inability to interface with mobile applications, the relative inaccuracy with movement, and the need for calibration have rendered those BP oscillometry devices inadequate for next-generation healthcare infrastructure where integration and continuous data acquisition and communication are required. Recently, the indirect approach to obtain BP values has been intensively investigated, where BP is mathematically derived through the “Time Delay” in propagation of pressure waves in the vascular system. This holds promise for the realization of cuffless and continuous BP monitoring systems, for both patients and healthy populations in both inpatient and outpatient settings. This review highlights recent efforts in developing these next-generation blood pressure monitoring devices and compares various mathematical models. The unmet challenges and further developments that are crucial to develop “Time Delay”-based BP devices are also discussed.