Search

Reconstruction of long-bone segmental defects (LBSDs) has been one of the biggest challenges in orthopaedics. Biomaterials for the reconstruction are required to be strong, osteoinductive, osteoconductive, and allowing for fast angiogenesis, without causing any immune rejection or disease transmission. There are four main types of biomaterials including autograft, allograft, artificial material, and tissue-engineered bone. Remarkable progress has been made in LBSD reconstruction biomaterials in the last ten years. The translational potential of this article Our aim is to summarize recent developments in the divided four biomaterials utilized in the LBSD reconstruction to provide the clinicians with new information and comprehension from the biomaterial point of view.

Rationale: Men and postmenopausal women are more prone to developing non-alcoholic fatty liver disease/steatohepatitis (NAFLD/NASH) than premenopausal women. However, the pathological links and underlying mechanisms of this disparity are still elusive. The sex-difference in hepatic very low-density lipoprotein (VLDL) assembly and secretion may contribute to NAFLD development. Estrogen-related receptor alpha (ERRα) is a key regulator of several metabolic processes. We hypothesized that ERRα plays a role contributing to the sex-difference in hepatic VLDL assembly and secretion. Methods: VLDL secretion and essential genes governing said process were assessed in male and female mice. Liver-specific ERRα-deficient (ERRαLKO) mice were generated to assess the rate of hepatic VLDL secretion and alteration in target gene expression. Overexpression of either microsomal triglyceride transfer protein (Mttp) or phospholipase A2 G12B (Pla2g12b) by adenovirus was performed to test if the fatty liver phenotype in male ERRαLKO mice was due to defects in hepatic VLDL secretion. Female ERRαLKO mice were put on a diet high in saturated fat, fructose and cholesterol (HFHC) to promote NASH development. Wild type female mice were either ovariectomized or treated with tamoxifen to induce a state of estrogen deficiency or disruption in estrogen signaling. Adenovirus was used to overexpress ERRα in these mice to test if ERRα was sufficient to rescue the suppressed VLDL secretion due to estrogen dysfunction. Finally, wild type male mice on a high-fat diet (HFD) were treated with an ERRα inverse agonist to assess if suppressing ERRα activity pharmacologically would lead to fatty liver development. Results: ERRα is an indispensable mediator modulating hepatic triglyceride-rich very low-density lipoprotein (VLDL-TG) assembly and secretion through coordinately controlling target genes apolipoprotein B (Apob), Mttp and Pla2g12b in a sex-different manner. Hepatic VLDL-TG secretion is blunted in ERRαLKO mice, leading to hepatosteatosis which exacerbates endoplasmic reticulum stress and inflammation paving ways for NASH development. Importantly, ERRα acts downstream of estrogen/ERα signaling in contributing to the sex-difference in hepatic VLDL secretion effecting hepatic lipid homeostasis. Conclusions: Our results highlight ERRα as a key mediator which contributes to the sex disparity in NAFLD development, suggesting that selectively restoring ERRα activity in the liver may be a novel strategy for treating NAFLD/NASH.

The hypoxia-inducible factor 1-alpha (HIF-1a) pathway plays a key role in regulating angiogenesis during wound healing. However, the diabetic condition hampers the stabilization of HIF-1a and thus inhibits the subsequent angiogenesis, and meanwhile, the function and phenotype transition of macrophage are impaired in the diabetic condition, which leads to prolonged and chronic inflammation. Both angiogenesis inhibition and inflammatory dysfunction make diabetic wound healing a major clinical challenge. Here, borosilicate (BS), a new group of bioceramics with a coupled network of interconnected [BO3] and [SiO4] which can incorporate therapeutic ions such as Cu2+, is synthesized and combined with silk fibroin (SF), a biocompatible natural amino acid polymer whose composition and structure are similar to a natural extracellular matrix (ECM), to obtain a compound system which can transform into a SF-MA-BS hydrogel under UV radiation via methacryloyloxy (MA) groups modified on both BS and SF. When in use, the compound system can thoroughly spread to the whole wound surface and be in situ photo-cross-linked to form an integral SF-MA-BS hydrogel that firmly adheres to the wound, protects the wound from external contamination, and further spontaneously promotes wound regeneration by releasing therapeutic ions. The wound repair of Streptozotocin-induced diabetic rats shows that diabetic wound healing is obviously accelerated by SF-MA-BS, interestingly the HIF-1a pathway is restored via interaction between HIF-1a and Cu2+, and angiogenesis is therefore enhanced. Meanwhile, inflammation is well regulated by SF-MA-BS, and long-term detrimental inflammation is avoided. These findings indicate that the SF-MA-BS hydrogel regenerates diabetic wounds, and further clinical trials are anticipated.

Osteochondral defect repair in osteoarthritis (OA) remains an unsolved clinical problem due to the lack of enough seed cells in the defect and chronic inflammation in the joint. To address this clinical need, we designed a bone marrow-derived mesenchymal stem cell (BMSC)-laden 3D-bioprinted multilayer scaffold with methacrylated hyaluronic acid (MeHA)/polycaprolactone incorporating kartogenin and β-TCP for osteochondral defect repair within each region. BMSC-laden MeHA was designed to actively introduce BMSCs in situ, and diclofenac sodium (DC)-incorporated matrix metalloproteinase-sensitive peptide-modified MeHA was induced on the BMSC-laden scaffold as an anti-inflammatory strategy. BMSCs in the scaffolds survived, proliferated, and produced large amounts of cartilage-specific extracellular matrix in vitro . The effect of BMSC-laden scaffolds on osteochondral defect repair was investigated in an animal model of medial meniscectomy-induced OA. BMSC-laden scaffolds facilitated chondrogenesis by promoting collagen II and suppressed interleukin 1β in osteochondral defects of the femoral trochlea. Congruently, BMSC-laden scaffolds significantly improved joint function of the injured leg with respect to the ground support force, paw grip force, and walk gait parameters. Therefore, this research demonstrates the potential of 3D-bioprinted BMSC-laden scaffolds to simultaneously inhibit joint inflammation and promote cartilage defect repair in OA joints.

Axin1 is a negative regulator of β-catenin signaling and its role in osteoblast precursor cells remains undefined. In the present studies, we determined changes in postnatal bone growth by deletion of Axin1 in osteoblast precursor cells and analyzed bone growth in newborn and postnatal Axin1Osx mice and found that hypertrophic cartilage area was largely expanded in Axin1Osx KO mice. A larger number of chondrocytes and unabsorbed cartilage matrix were found in the bone marrow cavity of Axin1Osx KO mice. Osteoclast formation in metaphyseal and subchondral bone areas was significantly decreased, demonstrated by decreased TRAP-positive cell numbers, associated with reduction of MMP9- and cathepsin K-positive cell numbers in Axin1Osx KO mice. OPG expression and the ratio of Opg to Rankl were significantly increased in osteoblasts of Axin1Osx KO mice. Osteoclast formation in primary bone marrow derived microphage (BMM) cells was significantly decreased when BMM cells were cultured with conditioned media (CM) collected from osteoblasts derived from Axin1Osx mice compared with BMM cells cultured with CM derived from WT mice. Thus, the loss of Axin1 in osteoblast precursor cells caused increased OPG and the decrease in osteoclast formation, leading to delayed bone growth in postnatal Axin1Osx KO mice.

Strontium as a popular osteogenic component has been incorporated into various types of orthopaedic biomaterials to enhance bone regeneration. It performs dual effects in promoting bone formation and inhibiting bone resorption. Studies have focused on the effects of strontium in regulating stem cells behaviors to initiate regenerative capacity. However, the mechanism of strontium on regulating stem cells fates and homeostasis has not been fully elucidated. In this study, the promoted effect of strontium on osteogenic differentiation of mesenchymal stem cells was confirmed both in vitro and in vivo. Interestingly, in responding to strontium treatment, stem cells performed asymmetric cell division to balance stemness maintenance and osteogenic differentiation. Asymmetric distribution of Par complex in daughter stem cells induced different cell fates by discriminately activating of osteogenic transcription factors. Strontium activated noncanonical Wnt signaling to regulate Par complex distribution. Understanding the mechanism of strontium on regulating stem cell fate could facilitate biomaterials designing to initiate endogenous bone regenerative capacity.

In this work, a biodegradable and biocompatible nanocomposite hydrogel was successfully prepared on basis of nanoclay and polyethylene-glycol diacrylates (PEGDA). The physical interspersing between nanoclay particles and PEG chains combined with the chemical crosslinking within the PEG networks endowed the obtained nanocomposite hydrogels with enhanced mechanical properties in comparison with pure PEG hydrogels. Simultaneously, the incorporation of nanoclay to the PEGDA/nanoclay (PEGDA-Clay) nanocomposite hydrogel not only improved the adsorption and spreading ability of cells on the hydrogels, but also effectively facilitated the in vitro osteogenic differentiation of primary rat osteoblasts due to the sustainable release of magnesium ions (Mg2+) and silicon ions (Si4+) from the PEGDA-Clay nanocomposite hydrogel. In addition, the implantation of the PEGDA-Clay nanocomposite hydrogels in the tibia defects of Sprague-Dawley rat could promoted the new bone formation efficiently, further suggesting the excellent osteogenic ability of PEGDA-Clay nanocomposite hydrogel. We expect that this kind of biocompatible nanocomposite hydrogels with attractive mechanical properties and a variety of bioactive osteogenic ions will offer a new possibility for bone tissue regeneration.

The immune responses are involved in every stage after implantation but the reported immune-regulated materials only work at the beginning without fully considering the different phases of bone healing. Here, poly(aryl-ether-ether-ketone) (PEEK) is coated with a programmed surface, which rapidly releases interleukin-10 (IL-10) in the first week and slowly delivers dexamethasone (DEX) up to 4 weeks. Owing to the synergistic effects of IL-10 and DEX, an aptly weak inflammation is triggered within the first week, followed by significant M2 polarization of macrophages and upregulation of the autophagy-related factors. The suitable immunomodulatory activities pave the way for osteogenesis and the steady release of DEX facilitates bone regeneration thereafter. The sequential immune-mediated process is also validated by an 8-week implementation on a rat model. This is the first attempt to construct implants by taking advantage of both immune-mediated modulation and sequential regulation spanning all bone regeneration phases, which provides insights into the fabrication of advanced biomaterials for tissue engineering and immunological therapeutics., Graphical abstract, Public summary • A programed surface is designed and fabricated for immune-mediated osteogenesis • The degradation of PTMC coating enables a sequential release of IL-10 and DEX • Initially, osteoimmunomodulation is achieved by IL-10 and a small amount of DEX • Afterwards, sustained release of DEX fosters the peri-implant bone regeneration

The emerging 3D bioprinting technique that is strongly dependent on the development of bioinks offers a promising opportunity to customize personalized bioscaffolds for precision and individualized therapy of bone defects. Hydrogels are one sort of attractive scaffolding materials due to their resemblance to extracellular matrices. Although much progress has been made in designing and fabricating high strength hydrogels, very few of them have been extended to the treatment of bone defects. In this work, we developed a hybrid bioink composed of a hydrogen bonding monomer (N-acryloyl glycinamide) (NAGA) and nanoclay. The hybrid ink could be conveniently tailored as a high strength PNAGA-Clay composite scaffold under UV light illumination of printed prehydrogel. The hydrogen bonding combined with physical cross-linking of nanoclay contributed to the superior mechanical performances as well as swelling stability of the hydrogels and bioscaffols. The sustainable release of intrinsic Mg2+ and Si4+ from the PNAG...

MicroRNAs (miRNAs) are highly conserved molecules that regulate protein levels post-transcriptionally. Aberrant miRNA expression presents in various musculoskeletal disorders, such as osteoporosis, osteoarthritis and rheumatoid arthritis. The expression levels of miRNAs are characterized by endogenous properties and tissue specificity. This raises the possibility that miRNAs could serve as useful clinical biomarkers in the diagnosis of certain diseases. Intervertebral disc degeneration (IDD) is one of the major causes of back pain, and a process characterized by a cascade of molecular, cellular, biochemical and structural changes. The presence of dysregulated miRNA expression in patients with disc degeneration diseases indicates that miRNAs may play a vital role in the pathogenesis of IDD. Here, we provide an introduction of the roles of miRNAs in the process of IDD, and the prospective application of miRNAs as biomarkers for IDD. Copyright © 2017 John Wiley & Sons, Ltd.

One key limitation to the application of linear biodegradable polyurethanes (LBPUs) in scaffold materials for bone regeneration is their insufficient mechanical properties. In this study, isosorbide (ISO), a rigid two-ring small diol is selected as a chain extender to produce a series of new poly (D,L-lactide)-based polyurethanes (ISO-PUs). It is confirmed that incorporating ISO as the chain extender can significantly reduce the crosslinking degree of ISO-PUs and thus increase their molecular weight and mechanical properties. ISO-PUs with Mn values of 72.09 kDa and 84.79 kDa demonstrate higher tensile strength & modulus (39.87 MPa & 2.19 GPa and 42.68 MPa & 2.57 GPa) than PDLLA with a Mn of 100 kDa (36.15 MPa & 2.07 GPa). All these results, together with the sound cytocompatibility of ISO-PUs with MC3T3-E1 cells based on the morphology observation and cell proliferation, suggest that ISO-PU should be a promising scaffold material for bone regeneration.

In osteoporosis scenario, tissue response to implants is greatly impaired by the deteriorated bone regeneration microenvironment. In the present study, a Mg-containing akermanite (Ak) ceramic was employed for the treatment of osteoporotic bone defect, based on the hypothesis that both beneficial ions (e.g. Mg2+ect.) released by the implants and the weak alkaline microenvironment pH (μe-pH) it created may play distinct roles in recovering the abnormal bone regeneration by stimulating osteoblastic anabolic effects. The performance of Ak, β-tricalcium phosphate (β-TCP) and Hardystone (Har) in healing a 3 mm bone defect on the ovariectomized (OVX) osteoporotic rat model was evaluated. Our results indicated that, there's more new bone formed in Ak group than in β-TCP or Har group at week 9. The initial μe-pHs of Ak were significantly higher than that of the β-TCP and Blank group, and this weak alkaline condition was maintained till at least 9 weeks post-surgery. Increased osteoblastic activity which was indicated by higher osteoid secretion was observed in Ak group at week 4 to week 9. An intermediate layer which was rich in phosphorus minerals and bound directly to the new forming bone was developed on the surface of Ak. In a summary, our study demonstrates that Ak exhibits a superior bone regenerative performance under osteoporosis condition, and might be a promising candidate for the treatment of osteoporotic bone defect and fracture., Graphical abstract Image 1, Highlights • A Mg-containing akermanite exhibited a superior bone defects/fracture regenerative performance under osteoporosis condition. • Akermanite implantation generated a durable weak alkaline μe-pH after the implantation. • A better understanding on μe-pH may facilitate the development of novel orthopedic materials used for osteoporosis patients.

ObjectivesIn this study, we aim to determine the effect of metformin on osteoarthritis (OA) development and progression.MethodsDestabilisation of the medial meniscus (DMM) surgery was performed in 10-week-old wild type and AMP-activated protein kinase (AMPK)α1 knockout (KO) mice. Metformin (4 mg/day in drinking water) was given, commencing either 2 weeks before or 2 weeks after DMM surgery. Mice were sacrificed 6 and 12 weeks after DMM surgery. OA phenotype was analysed by micro-computerised tomography (μCT), histology and pain-related behaviour tests. AMPKα1 (catalytic alpha subunit of AMPK) expression was examined by immunohistochemistry and immunofluorescence analyses. The OA phenotype was also determined by μCT and MRI in non-human primates.ResultsMetformin upregulated phosphorylated and total AMPK expression in articular cartilage tissue. Mild and more severe cartilage degeneration was observed at 6 and 12 weeks after DMM surgery, evidenced by markedly increased Osteoarthritis Research Society International scores, as well as reduced cartilage areas. The administration of metformin, commencing either before or after DMM surgery, caused significant reduction in cartilage degradation. Prominent synovial hyperplasia and osteophyte formation were observed at both 6 and 12 weeks after DMM surgery; these were significantly inhibited by treatment with metformin either before or after DMM surgery. The protective effects of metformin on OA development were not observed in AMPKα1 KO mice, suggesting that the chondroprotective effect of metformin is mediated by AMPK signalling. In addition, we demonstrated that treatment with metformin could also protect from OA progression in a partial medial meniscectomy animal model in non-human primates.ConclusionsThe present study suggests that metformin, administered shortly after joint injury, can limit OA development and progression in injury-induced OA animal models.

The corrosion behaviour of X80 pipeline steel was studied in a simulated marine environment inoculated with marine bacterium Marinobacter salsuginis. The electrochemical results showed that the increase in linear polarization resistance, charge transfer resistance, and the decrease in corrosion current density of the X80 pipeline steel immersed in the biotic medium indicated its high corrosion resistance compared to those in the abiotic medium. Surface morphological techniques including scanning electron microscopy, confocal laser scanning microscopy and live/dead cells staining were employed to observe the biofilm morphology and bacterial viability after different immersion times. X-ray photoelectron spectroscopy was used to analyse the oxides film formed on the steel surface. The obtained results indicated that the corrosion inhibition efficiency was obviously higher in the biotic medium compared to that in the abiotic medium. The high corrosion resistance of X80 steel in biotic medium was attributed to the formation of biofilm and the development of extracellular polymeric substances (EPS) layer on its surface.

Bacterial cellulose (BC) is a biosynthesized carbohydrate polymer with excellent biocompatibility and water holding capability. However, it lacks an inherent antibacterial activity that has limited its in-depth biomedical applications. This study investigated a novel strategy of adopting a simultaneous process to chemically anchor a quaternary ammonium salt (R-N(CH3)+) with a special vinyl group (2-methacryloyloxyethyl trimethylammonium chloride, METAC) onto the BC, and meanwhile, enhance the density of (R-N(CH3)+) via free radical vinyl polymerization. The results have confirmed the transition of BC surface from a negatively-charged surface to a polycationic surface via such a simultaneous reaction. As compared to chitin film (a representative of R-NH3+), the resulting METAC-grafted BC (a representative of high-density R- N(CH3)+) acquired excellent water absorbability (40 times of dry weight of the BC), 99% antibacterial activity against Escherichia coli and Staphylococcus aureus, a satisfactory in-vitro biocompatibility, and a better in-vivo wound healing outcome with an excellent in-vivo antibacterial efficacy. This study has exhibited potential in utilizing a facile method to prepare a bio-safe, adaptive antibacterial surface for various biomedical applications.

In this work, hollow mesoporous bioglass (HMBG) nanoparticles were prepared in a hexadecyl trimethyl ammonium bromide (CTAB)-cyclonexane-ethanol-water (O/W) emulsion system. The HMBG nanoparticles possessed higher drug storage ability and stable drug release behavior which resulted from HMBG's unique mesoporous structure. The mesoporous structure could be modulated by adjusting the concentration of CTAB. The specific surface area and drug loading efficiency was as high as 749.619 m2g−1 and 55.1%. Besides, in vivo experiments demonstrated that the HMBG nanoparticles could promote the bone tissue regeneration and the drug-loading HMBG nanoparticles possessed better repair capability. The unique structure and properties might make the HMBG nanoparticles good candidates as drug carriers and repair materials for bone tissue regeneration.

Preserving the bioactivity of growth factors (GFs) and mimicking their in vivo supply patterns are challenging in the development of GFs-based bone grafts. In this study, we develop a 2-N, 6-O-sulfated chitosan (26SCS) functionalized dual-modular scaffold composed of mesoporous bioactive glass (MBG) with hierarchical porous structures (module I) and GelMA hydrogel columns (module II) in situ fixed in hollowed channels of the module I, which is capable of realizing differentiated delivery modes for osteogenic rhBMP-2 and angiogenic VEGF. A combinational release profile consisting of a high concentration of VEGF initially followed by a decreasing concentration over time, and a slower/sustainable release of rhBMP-2 is realized by immobilizing rhBMP-2 in module I and embedding VEGF in module II. Systematic in vitro and in vivo studies prove that the two coupled processes of osteogenesis and angiogenesis are well-orchestrated and both enhanced ascribed to the specific GFs delivery modes and 26SCS decoration. 26SCS not only enhances the GFs' bioactivity but also decreases antagonism effects of noggin. This study highlights the importance of differentiating the delivery pattern of different GFs and likely sheds light on the future design of growth factor-based bone grafts.

It is generally accepted that biodegradable materials greatly influence the nearby microenvironment where cells reside; however, the range of interfacial properties has seldom been discussed due to technical bottlenecks. This study aims to depict biomaterial microenvironment boundaries by correlating interfacial H+ distribution with surrounding cell behaviors. Using a disuse-related osteoporotic mouse model, we confirmed that the abnormal activated osteoclasts could be suppressed under relatively alkaline conditions. The differentiation and apatite-resorption capability of osteoclasts were "switched off" when cultured in titrated material extracts with pH values higher than 7.8. To generate a localized alkaline microenvironment, a series of borosilicates were fabricated and their interfacial H+ distributions were monitored spatiotemporally by employing noninvasive microtest technology. By correlating interfacial H+ distribution with osteoclast "switch on/off" behavior, the microenvironment boundary of the tested material was found to be 400 ± 50 μm, which is broader than the generally accepted value, 300 μm. Furthermore, osteoporotic mice implanted with materials with higher interfacial pH values and boarder effective ranges had lower osteoclast activities and a thicker new bone. To conclude, effective proton microenvironment boundaries of degradable biomaterials were depicted and a weak alkaline microenvironment was shown to promote regeneration of osteoporotic bones possibly by suppressing abnormal activated osteoclasts.

Local administration of antibiotics is a primary approach for treating chronic osteomyelitis (CO). However, clinically used antibiotic delivery systems exhibit suboptimal osteoinductivity, ascribed to the carrier material itself and the cytotoxicity of the loaded antibiotic, often leading to unsatisfactory treatment efficiency. To overcome this problem, we introduced Si into hydroxyapatite (HAp) nanocarriers by surface wrapping with a certain thickness of mesoporous bioactive glass (MBG). This facilitates controlled and sustained antibiotic release, while more importantly, silicon (Si) released from MBG counteracts the side effects of having a high antibiotic concentration at the defect site. Vancomycin-loaded HAp nanocarriers wrapped with MBG were shown to have a higher loading efficiency and more sustained antibiotic release behaviour. In vitro experiments using MC3T3-E1 cells showed that Si ions were effective in counteracting the negative effects of vancomycin on cell proliferation and osteogenic differentiation. In vivo implantation into a CO rat model showed that vancomycin-loaded MBG-wrapped HAp nanocarriers efficiently eliminated the infection and promoted superior bone healing at the fracture site compared to the control that did not release Si. This study highlights the important role of Si in neutralising the side effects of antibiotics, thus opening up a new design concept for biomaterials as antibiotic carriers for treating infection.

Timely and accurate diagnosis of cancer is crucial to cancer treatment. However, serological diagnosis of cancer still faces great challenge because the conventional methodology based on the enzyme-linked immune sorbent assay (ELISA) is costly, time-consuming, and complicated, involving multiple steps. Herein, lactose-functionalized gold nanorods (Lac-GNRs) are fabricated as efficient biosensors to detect cancerous conditions based on the unique surface plasmon resonance properties of GNRs and high specificity of lactose to the galectin-1 cancer biomarker. A trace concentration of galectin-1 as small as 10(-13) M can be detected by Lac-GNRs. The comparative study among BSA, galectin-3, and galectin-1 demonstrates the good specificity of Lac-GNRs to galectin-1 either in aqueous solutions or in the complex and heterogeneous serum specimens. Clinical tests show that the Lac-GNRs biosensors can readily distinguish the serums of cancer patients from those of healthy persons simply by using a microplate reader or even direct visual observation. The Lac-GNRs biosensing platform is highly efficient and easy to use and have great potential in rapid screening of cancer patients.

Introduction Because of its good osteoconductivity, strontium (Sr) ranelate has been extensively used as a bone substitute for the treatment of bone disorders. To facilitate treatment, Sr is also incorporated into calcium phosphate cement (Sr-CPC); however, the Sr from Sr-CPC is not sufficient to induce a significant increase of bone mass in an ovariectomized rat model. To improve the efficiency of Sr-CPC, we developed a calcitonin gene–related peptide (CGRP)- and Sr-enriched CPC (CGRP-Sr-CPC). Methods We used X-ray diffraction and Fourier transform infrared spectroscopy to measure properties of CGRP-Sr-CPC. We also employed a cell proliferation assay, alkaline phosphatase (ALP) assay and real-time PCR to assess the effects of CPC implants on proliferation and differentiation of bone mesenchymal stem cells (BMSCs) from an ovariectomized rat model. Results CGRP did not change the composition, pore sizes and compressive strength of the cement body as compared with Sr-CPC. Meanwhile, CGRP-Sr-CPC did not show cell cytotoxicity to BMSCs. Further, CGRP and Sr released from CGRP-Sr-CPC significantly enhanced the cell proliferation of BMSCs and increased the activity of ALP during differentiation of BMSCs, compared with CGRP- or Sr-CPC. Moreover, CGRP-Sr-CPC significantly up-regulated the expression levels of osteogenic differentiation-related genes including Alp, Bmp2, Osteonectin and Runx2 during differentiation. Conclusions These findings demonstrate the optimized effects of CGRP- and Sr-enriched CPC in promoting proliferation and osteogenic differentiation of BMSCs, suggesting the potential ability of this novel cement to assist the formation of new bone during osteoporosis-induced bone disorders.

Calcium phosphate cement (CPC) has been widely used in bone tissue repairing due to its physical mechanical properties and biocompatibility. Addition of trace element to CPC has shown promising evidence to improve the physical properties and biological activities of CPC. Lithium (Li) has effect on osteoblast proliferation and differentiation. In this study, we incorporated Li to CPC and examined the physical properties of Li/CPC and its effect on osteoblast proliferation and differentiation. We found that Li doped CPC maintained similar setting time, pore size distribution, compressive strength, composition, and morphology as CPC without Li. Additionally, Li doped CPC improved osteoblast proliferation and differentiation significantly compared to CPC without Li. To our knowledge, our results, for the first time, show that Li doped CPC has beneficial effect on osteoblast in cell culture while keeps the excellent physical-mechanical properties of CPC. This study will lead to potential application of Li doped CPC in bone tissue engineering. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 944-952, 2017.

Bispecific T-cell engager (BiTE) immunotherapy is a promising therapy for cancer treatment. However, the high cost and short life-time in vivo of the BiTE limit its wide clinical application. Here, we built for the first time a gene delivery system based on MIL-88A metal organic framework nanoparticles and minicricle DNA (MOF/MC) to realize high-efficient in vivo expression of anti-CD3/anti-EpCAM BiTE. X-ray photoelectron spectroscopy (XPS) and dynamic light scattering (DLS) analysis verified that MC molecules were loaded onto MOF nanoparticles through metal-phosphate bonds and electrostatic interactions. It is found that intraperitoneal injection (i.p.) of MOF/MC suspensions showed good transfection performance in mice abdominal cavity with low toxicity. In an intraperitoneal xenograft mice model established using SKOV3 ovarian cells, i.p. injection of MOF/MC.BiTE significantly inhibited tumor growth and prolonged the average survival time of the mice. Overall, our study demonstrates a simple and highly efficient MOF-based gene delivery system holding promise for effective ovarian cancer immunotherapy.

In this study, 3D porous anodic coatings containing 1.92 wt% copper (Cu-1.92 wt%) are developed on Ti-6Al-4V alloys via micro-arc oxidation (MAO). The in vitro long-term antibacterial activity of the MAO-treated samples is systematically evaluated. The results show that after 14 days’ immersion in Hanks’ solution, the antibacterial rate of Cu-1.92 wt% against Staphylococcus aureus (S. aureus) remains at 100%, while that against Escherichia coli (E. coli) decreases to 92% and 12% after 8 and 14 days, respectively, suggesting that Cu-1.92 wt% still exhibits good long-term antibacterial properties even after 14 days. Quantitative real-time reverse transcription polymerase chain reaction (qRT-PCR) analysis and reactive oxygen species (ROS) fluorescence imaging reveal that the antibacterial efficiency of Cu-1.92 wt% is higher than those of Cu-1.92 wt%-8D, Cu-1.92 wt%-14D, and the untreated control. The enhanced antibacterial properties of the MAO samples are attributed to ROS-mediated DNA damage prompted by the presence of Cu in the coatings. In addition, Cu-1.92 wt% favors good initial cell adhesion and high cell viability. These results reveal that the fabricated biocompatible copper-doped 3D porous coatings exhibit good in vitro long-term antibacterial properties and have potential to be applied in the orthopaedics clinic in the future.

Cutaneous wounds, especially chronic wounds, remain clinical challenges, and this is partially due to the complex healing process composed of four overlapping but distinct stages including hemostasis, inflammation, proliferation and remodeling. Therefore, wound dressings with spatially designed structures which can temporally regulate certain bioactive components to function at specific healing stages might be able to accelerate the healing process. In this study, nanobioglass incorporated chitosan-PVA (polyvinyl alcohol) trilayer nanofibrous membrane (nBG-TFM) was fabricated via sequential electrospinning. This membrane exhibited excellent biocompatibility, antibacterial activity and regeneration promotion effect. Furthermore, spatially designed structure optimized functions of each component and provided more suitable microenvironment as compared with uniform membrane. Rat full-thickness skin defects model and mice diabetic chronic wound model showed that nBG-TFM could achieve significantly accelerated and enhanced healing, in terms of complete re-epithelialization, improved collagen alignment and formation of skin appendages. It was revealed that nBG-TFM functioned through upregulating growth factors including VEGF and TGF-β. Meanwhile inflammatory cytokines such as TNF-α and IL-1β were downregulated. The technology presented in this study shed new light on designing functional wound dressings which can promote healing of chronic wounds.

Stem cells are well-known for their great capacity for tissue regeneration. This provides a promising source for cell-based therapies in treating various bone degenerative disorders. However, the major hurdles for their application in transplantation are the poor bone marrow homing and engraftment efficiencies. Stromal cell-derived factor 1 (SDF-1) has been identified as a major stem cell homing factor. With the aims of bone targeted SDF-1 delivery and regulating MSCs migration, alendronate modified liposomal nanoparticles (Aln-Lipo) carrying SDF-1 gene were developed in this study. Alendronate modification significantly increased the mineral binding affinity of liposomes, and facilitated the gene delivery to osteoblastic cells. Up-regulated SDF-1 expression in osteoblasts triggered MSCs migration. Systemic infusion of Aln-Lipo-SDF-1 with fluorescence labeling in mice showed the accumulation in osseous tissue by biophotonic imaging. Corresponding to the delivered SDF-1, the transplanted GFP+ MSCs were attracted to bone marrow and contributed to bone regeneration. This study may provide a useful technique in regulating stem cell migration.

In article number 1700550, Changshun Ruan, Haobo Pan, William Weijia Lu, and co‐workers report the development of an osteoblast‐laden nanocomposite hydrogel construct for bone regeneration. The construct is created using a two‐channel, 3D‐bioprinting method and exhibits high cell viability in the short term after bioprinting. In the long term, it is shown to have excellent osteogenic capabilities, both in vitro and in vivo, because of the bioactive ions that are gradually released.

An ideal dental implant coating should provide a highly protective interface and an osteogenic function. Inspired by the excellent biocompatibility and anti-corrosion of the Nb element, we produced Nb-based oxide, nitride and carbide films as well as the pure metal Nb film for surface enhancement of dental implants, and compare the impact of the nonmetal elements on the electrochemical, tribological, tribo-corrosion and biological performance of the coated implants. The NbC film, composed of a single-phased subniobium carbide, displays mechanical advantages and anticorrosion characteristics that are distinguished from the other composite films, highlighting its potential outstanding protective efficiency for dental implants against corrosion and wear. Rat bone marrow mesenchymal stem cells (rBMSCS) were found more readily to attach, grow and osteogenically differentiate on the NbC film compared to the Nb, NbO and NbN films, indicating the osteogenesis potential of the NbC film. Taken all the results together, it can be concluded that the NbC film have the highest potential for dental implant surface modification.

Transforming growth factor-β (TGF-β) has been demonstrated as a potential therapeutic target in osteoarthritis. However, beneficial effects of TGF-β supplement and inhibition have both been reported, suggesting characterization of the spatiotemporal distribution of TGF-β during the whole time course of osteoarthritis is important. To investigate the activity of TGF-β in osteoarthritis progression, we collected knee joints from Dunkin-Hartley (DH) guinea pigs at 3, 6, 9, and 12-month old (n = 8), which develop spontaneous osteoarthritis in a manner extraordinarily similar to humans. Via histology and micro-computed tomography (CT) analysis, we found that the joints exhibited gradual cartilage degeneration, subchondral plate sclerosis, and elevated bone remodeling during aging. The degenerating cartilage showed a progressive switch of the expression of phosphorylated Smad2/3 to Smad1/5/8, suggesting dual roles of TGF-β/Smad signaling during chondrocyte terminal differentiation in osteoarthritis progression. In subchondral bone, we found that the locations and age-related changes of osterix(+) osteoprogenitors were in parallel with active TGF-β, which implied the excessive osteogenesis may link to the activity of TGF-β. Our study, therefore, suggests an association of cartilage degeneration and excessive bone remodeling with altered TGF-β signaling in osteoarthritis progression of DH guinea pigs. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:763-770, 2016.

Loss of bone microstructure integrity is thought to be related to osteonecrosis. But the relationship between the time when bone microstructure integrity loss appears and the onset of osteonecrosis has not yet been determined. Our study demonstrated abnormal changes of subchondral bone microstructure involved in the early pathogenesis of osteonecrosis.Using a rabbit model, we investigated the changes of subchondral bone microstructure following steroid administration to identify the onset of abnormal bone microstructure development in steroid-induced osteonecrosis.Fifty-five adult female Japanese White rabbits (mean body weight 3.5 kg; mean age 24 months) were used and randomly divided among three time points (3, 7, and 14 days) consisting of 15 rabbits each, received a single intramuscular injection of methylprednisolone acetate (MP; Pfizer Manufacturing Belgium NV) at a dose of 4 mg/kg, and a control group consisting of 10 rabbits was fed and housed under identical conditions but were not given steroid injections. A micro-CT scanner was applied to detect changes in the trabecular region of subchondral bone of excised femoral head samples. Parameters including bone volume fraction (BV/TV), bone surface (BS), trabecular bone pattern factor (Tb.Pf), trabecular thickness/number/separation (Tb.Th, Tb.N, and Tb.Sp), and structure model index (SMI) were evaluated using the software CTAn (SkyScan). After micro-CT scans, bilateral femoral heads were cut in the coronal plane at a thickness of 4 μm. The sections were then stained with haematoxylin-eosin and used for the diagnosis of osteonecrosis and the rate of development of osteonecrosis.The BV/TV, BS, Tb.Th and Tb.N demonstrated a time-dependent decline from 3, 7, and 14 days compared with the control group, while the Tb.Pf, Tb.Sp and SMI demonstrated an increase at 3, 7, and 14 days compared with the control group. For the histopathology portion, osteonecrosis was not seen 3 days after steroid treatment, but was present 7 days after treatment and was obvious 14 days after treatment. Furthermore, the rate of osteonecrosis appearing between 7 and 14 days was not significantly different. In addition, the presence and variation of BV/TV, BS, Tb.Pf, Tb.Th, Tb.N, and SMI demonstrated significant changes at 7 days compared with the control group except Tb.Sp (at 14 days) and this is the time when osteonecrosis is thought to occur in this model.This study demonstrated that osteonecrosis in rabbits is chronologically associated with changes in subchondral bone microstructure.

Change of microenvironment pH by biodegradable implants may ameliorate unbalanced osteoporotic bone remodeling. The present work demonstrated that a weak alkaline condition stimulated osteoblasts differentiation while suppressed osteoclast generation. In vivo, implants with an alkaline microenvironment pH (monitored by a pH microelectrode) exhibited a promising healing effect for the repair of osteoporotic bone defects. Under osteoporotic conditions, the response of the bone microenvironment to an endosseous implant is significantly impaired, and this substantially increases the risk of fracture, non-union and aseptic implant loosening. Acid-base equilibrium is an important factor influencing bone cell behaviour. The present purpose was to study the effect of a series of alkaline biodegradable implant materials on regeneration of osteoporotic bone defect, monitoring the microenvironment pH (μe-pH) over time. The proliferation and differentiation potential of osteoporotic rat bone marrow stromal cells and RAW 264.7 cells were examined under various pH conditions. Ovariectomized rat bone defects were filled with specific biodegradable materials, and μe-pH was measured by pH microelectrode. New osteoid and tartrate-resistant acid phosphatase-positive osteoclast-like cells were examined by Goldner’s trichrome and TRAP staining, respectively. The intermediate layer between implants and new bone were studied using energy-dispersive X-ray spectroscopy (EDX) linear scanning. In vitro, weak alkaline conditions stimulated osteoporotic rat bone marrow stromal cells (oBMSC) differentiation, while inhibiting the formation of osteoclasts. In vivo, μe-pH differs from that of the homogeneous peripheral blood and exhibits variations over time particular to each material. Higher initial μe-pH was associated with more new bone formation, late response of TRAP-positive osteoclast-like cells and the development of an intermediate ‘apatitic’ layer in vivo. EDX suggested that residual material may influence μe-pH even 9 weeks post-surgery. The pH microelectrode is suitable for in vivo μe-pH detection. Alkaline biodegradable materials generate an in vivo microenvironmental pH which is higher than the normal physiological value and show promising healing effects in the context of osteoporotic bone defects.

An osteoblast‐laden nanocomposite hydrogel construct, based on polyethylene glycol diacrylate (PEGDA)/laponite XLG nanoclay ([Mg5.34Li0.66Si8O20(OH)4]Na0.66, clay)/hyaluronic acid sodium salt (HA) bio‐inks, is developed by a two‐channel 3D bioprinting method. The novel biodegradable bio‐ink A, comprised of a poly(ethylene glycol) (PEG)–clay nanocomposite crosslinked hydrogel, is used to facilitate 3D‐bioprinting and enables the efficient delivery of oxygen and nutrients to growing cells. HA with encapsulated primary rat osteoblasts (ROBs) is applied as bio‐ink B with a view to improving cell viability, distribution uniformity, and deposition efficiency. The cell‐laden PEG–clay constructs not only encapsulated osteoblasts with more than 95% viability in the short term but also exhibited excellent osteogenic ability in the long term, due to the release of bioactive ions (magnesium ions, Mg2+ and silicon ions, Si4+), which induces the suitable microenvironment to promote the differentiation of the loaded exogenous ROBs, both in vitro and in vivo. This 3D‐bioprinting method holds much promise for bone tissue regeneration in terms of cell engraftment, survival, and ultimately long‐term function.

In scenario of osteoporotic fracture, significantly higher activity of osteoclasts than osteoblasts may lead to continuous loss of bone in fracture/defect site. Impaired bone regeneration efficiency is the major barrier that influences endosseous implants to get a better performance, and this substantially increases the risk of a second fracture, nonunion, and aseptic implant loosening. Although great effects have been made, there are still no clinically approved biomaterials specifically tailored for applications in osteoporotic bones. The key issue for developing such biomaterials is to reestablish normal bone regeneration at the fracture site. Acid-base property could directly influence the behavior of bone cells, thus making it an important factor to modulate the unbalanced activity between osteoclast and osteoblast in osteoporotic conditions. More importantly, it is adjustable through implant biodegradation. Therefore, a rational strategy to reconstruct the regeneration balance in the fracture site is to regulate the microenvironmental pH (μe-pH) through the application of biodegradable materials. The present chapter provides an overview on how pH change influences bone cells behaviors as well as recent development on revealing the role of μe-pH in guiding the localized bone regeneration. We proposed that the μe-pH is an important and accessible factor which should be taken into consideration in the development of orthopedic biomaterials, in particular for repair of osteoporotic bone fracture/defect.

Photodynamic therapy (PDT) utilizing light-induced reactive oxygen species (ROS) is a promising alternative to combat antibiotic-resistant bacteria and biofilm. However, the photosensitizer (PS)-modified surface only exhibits antibacterial properties in the presence of light. It is known that extended photoirradiation may lead to phototoxicity and tissue hypoxia, which greatly limits PDT efficiency, while ambient pathogens also have the opportunity to attach to biorelevant surfaces in medical facilities without light. Here, an antimicrobial film composed of black phosphorus nanosheets (BPSs) and poly (4-pyridonemethylstyrene) endoperoxide (PPMS-EPO) to control the storage and release of ROS reversibly is introduced. BPS, as a biocompatible PS, can produce high singlet oxygen under the irradiation of visible light of 660 nm, which can be stably stored in PPMS-EPO. The ROS can be gradually thermally released in the dark. In vitro antibacterial studies demonstrate that the PPMS-EPO/BPS film exhibits a rapid disinfection ability with antibacterial rate of 99.3% against Escherichia coli and 99.2% against Staphylococcus aureus after 10 min of irradiation. Even without light, the corresponding antibacterial rate reaches 76.5% and 69.7%, respectively. In addition, incorporating PPMS significantly improves the chemical stability of the BPS.

A weak alkaline environment is established to facilitate the growth of osteoblasts. Unfortunately, this is inconsistent with the application of biodegradable polymer in bone regeneration, as the degradation products are usually acidic. In this study, the variation of the interfacial pH of poly (D, L-lactide) and piperazine-based polyurethane ureas (P-PUUs), as the representations of acidic degradable materials, and the behavior of osteoblasts on these substrates with tunable interfacial pH were investigated in vitro. These results revealed that the release of degraded products caused a rapid decrease in the interfacial pH, and this could be relieved by the introduction of alkaline segments. On the contrary, when culturing with osteoblasts, the variation of the interfacial pH revealed an upward tendency, indicating that cell could construct the microenvironment by secreting cellular metabolites to satisfy its own survival. In addition, the behavior of osteoblasts on substrates exhibited that P-PUUs with the most PP units were better for cell growth and osteogenic differentiation of cells. This is due to the hydrophilic surface and the moderate N% in P-PUUs, key factors in the promotion of the early stages of cellular responses, and the interfacial pH contributing to the enhanced effect on osteogenic differentiation.

Sustained drug release plays a critical role in targeting the therapy of local diseases such as bacterial infections. In the present work, porous iron-carboxylate metal–organic framework [MOF-53(Fe)] nanoparticles (NPs) were designed to entrap the vancomycin (Van) drugs. This system exhibited excellent chemical stability under acidic conditions (pH 7.4, 6.5, and 5.5) and much higher drug-loading capability because of the high porosity and large surface area of MOF NPs. The results showed that the drug-loading ratio of Van could reach 20 wt % and that the antibacterial ratio of the MOF-53(Fe)/Van system against Staphylococcus aureus could reach up to 90%. In addition, this MOF-53(Fe)/Van system exhibited excellent biocompatibility because of its chemical stability and sustained release of iron ions. Hence, these porous MOF NPs are a promising bioplatform not only for local therapy of bacterial infections but also for other biomedical therapies for tissue regeneration.

By virtue of its excellent bioactivity and osteoconductivity, calcium phosphate cement (CPC) has been applied extensively in bone engineering. Doping a trace element into CPC can change physical characteristics and enhance osteogenesis. The trace element lithium has been demonstrated to stimulate the proliferation and differentiation of osteoblasts. We investigated the fracture-healing effect of osteoporotic defects with lithium-doped calcium phosphate cement (Li/CPC) and the underlying mechanism. Li/CPC bodies immersed in simulated body fluid converted gradually to hydroxyapatite. Li/CPC extracts stimulated the proliferation and differentiation of osteoblasts upon release of lithium ions (Li+) at 25.35 ± 0.12 to 50.74 ± 0.13 mg/l through activation of the Wnt/β-catenin pathway in vitro. We also examined the effect of locally administered Li+ on defects in rat tibia between CPC and Li/CPC in vivo. Micro-computed tomography and histological staining showed that Li/CPC had better osteogenesis by increasing bone mass and promoting repair in defects compared with CPC (P + from Li/CPC may accelerate bone regeneration from injury through activation of the Wnt/β-catenin pathway in osteoporosis.

Three-dimensional porous scaffolds of a borosilicate bioactive glass (designated 13-93B1), with the composition 6Na2O-8K2O-8MgO-22CaO-18B2O3-36SiO2-2P2O5 (mol%), were prepared using a foam replication technique and evaluated in vitro and in vivo. Immersion of the scaffolds for 30 days in a simulated body fluid in vitro resulted in partial conversion of the glass to a porous hydroxyapatite composed of fine needle-like particles. The capacity of the scaffolds to support bone formation in vivo was evaluated in non-critical sized defects created in the femoral head of rabbits. Eight weeks post-implantation, the scaffolds were partially converted to hydroxyapatite, and they were well integrated with newly-formed bone. When loaded with platelet-rich plasma (PRP), the scaffolds supported bone regeneration in segmental defects in the diaphysis of rabbit radii. The results indicate that these 13-93B1 scaffolds, loaded with PRP or without PRP, are beneficial for bone repair due to their biocompatibility, conversion to hydroxyapatite, and in vivo bone regenerative properties.

Purpose: To evaluate the effect of intervention timing of Sr treatment on trabecular bone microstructure and mechanics. Methods: Ninety female rats were randomly divided into three batches with three groups in each batch. Each group was divided according to the initiation timing of vehicle or strontium compound (SrC), which was at week 0 (early), 4 (mid-term) and 8 (late) after the ovariectomy, respectively. The treatment lasted for 12 weeks. The trabecular bone biomechanical properties, trabecular bone tissue mechanical properties, trabecular bone microstructure, and bone remodeling were analyzed with mechanical testing, nanoindentation, microCT, and histomorphometry, respectively. The osteoblast and osteoclast phenotypic genes were analyzed with real-time polymerase chain reaction (PCR). Results: Early and mid-term Sr treatment significantly increased biomechanical properties of trabecular bone, which was associated with increased microarchitecture parameters, increased bone formation parameters and up-regulation of osteoblast-related gene expression. Late Sr treatment failed to exert a beneficial effect on any of those parameters.Conclusions: The beneficial effect of Sr was dependent on the intervention timing in ovariectomized rats.

The development of an optimal animal model that could provide fast assessments of the interaction between bone and orthopedic implants is essential for both preclinical and theoretical researches in the design of novel biomaterials. Compared with other animal models, mice have superiority in accessing the well-developed transgenic modification techniques (e.g., cell tracing, knockoff, knockin, and so on), which serve as powerful tools in studying molecular mechanisms. In this study, we introduced the establishment of a mouse model, which was specifically tailored for the assessment of bone-implant interaction in a load-bearing bone marrow microenvironment and could potentially allow the molecular mechanism study of biomaterials by using transgenic technologies. The detailed microsurgery procedures for developing a bone defect (Φ = 0.8 mm) at the metaphysis region of the mouse femur were recorded. According to our results, the osteoconductive and osseointegrative properties of a well-studied 45S5 bioactive glass were confirmed by utilizing our mouse model, verifying the reliability of this model. The feasibility and reliability of the present model were further checked by using other materials as objects of study. Furthermore, our results indicated that this animal model provided a more homogeneous tissue-implant interacting surface than the rat at the early stage of implantation and this is quite meaningful for conducting quantitative analysis. The availability of transgenic techniques to mechanism study of biomaterials was further testified by establishing our model on Nestin-GFP transgenic mice. Intriguingly, the distribution of Nestin

A series of biodegradable Mg-Cu alloys is designed to induce osteogenesis, stimulate angiogenesis, and provide long-lasting antibacterial performance at the same time. The Mg-Cu alloys with precipitated Mg2Cu intermetallic phases exhibit accelerated degradation in the physiological environment due to galvanic corrosion and the alkaline environment combined with Cu release endows the Mg-Cu alloys with prolonged antibacterial effects. In addition to no cytotoxicity towards HUVECs and MC3T3-E1 cells, the Mg-Cu alloys, particularly Mg-0.03Cu, enhance the cell viability, alkaline phosphatase activity, matrix mineralization, collagen secretion, osteogenesis-related gene and protein expressions of MC3T3-E1 cells, cell proliferation, migration, endothelial tubule forming, angiogenesis-related gene, and protein expressions of HUVECs compared to pure Mg. The favorable osteogenesis and angiogenesis are believed to arise from the release of bioactive Mg and Cu ions into the biological environment and the biodegradable Mg-Cu alloys with osteogenesis, angiogenesis, and long-term antibacterial ability are very promising in orthopedic applications.

As a novel mediator of hepatic very low-density lipoproteins (VLDL) secretion, phospholipase A2 G12B (PLA2G12B) is transcriptionally regulated by hepatocyte nuclear factor-4 alpha (HNF-4α). Farnesoid X receptor (FXR) plays a critical role in maintaining bile acids and triglycerides (TG) homeostasis. Here we report that FXR regulates serum TG level in part through PLA2G12B. Activation of FXR by chenodeoxycholic acid (CDCA) or GW4064 significantly decreased PLA2G12B expression in HepG2 cells. PLA2G12B expression was transcriptionally repressed due to an FXR-mediated up-regulation of small heterodimer partner (SHP) which functionally suppresses HNF-4α activity. We found that hepatic PLA2G12B expression was suppressed and serum TG level reduced in high fat diet mice treated with CDCA. Concurrently, CDCA treatment lowered hepatic VLDL-TG secretion. Our data demonstrate that activation of FXR promotes TG lowering, not only by decreasing de novo lipogenesis but also reducing hepatic secretion of TG-rich VLDL particles in part through suppressing PLA2G12B expression.

MicroRNAs are involved in many cellular and molecular activities and played important roles in many biological and pathological processes, such as tissue formation, cancer development, diabetes, neurodegenerative diseases, and cardiovascular diseases. Recently, it has been reported that microRNAs can modulate the differentiation and activities of osteoblasts and osteoclasts, the key cells that are involved in bone remodeling process. Meanwhile, the results from our and other research groups showed that the expression profiles of microRNAs in the serum and bone tissues are significantly different in postmenopausal women with or without fractures compared to the control. Therefore, it can be postulated that microRNAs might play important roles in bone remodeling and that they are very likely to be involved in the pathological process of postmenopausal osteoporosis. In this review, we will present the updated research on the regulatory roles of microRNAs in osteoblasts and osteoclasts and the expression profiles of microRNAs in osteoporosis and osteoporotic fracture patients. The perspective of serum microRNAs as novel biomarkers in bone loss disorders such as osteoporosis has also been discussed.

article i nfo Background: The mechanism for the uncoupling effects of Sr on bone remains to be evaluated. Osteoblasts play important roles in osteoclastogenesis through regulating receptor activated nuclear factor kappa B (RANK) ligand (RANKL) and osteoprotegerin (OPG) expression. We hypothesize that OPG plays an important role in the cross-talk between osteoclasts and osteoblasts in response to Sr treatment. Materials and methods: MC3T3E1 cells were treated with Sr chloride (0-3 mM) and conditioned media were collected at 24 h after the treatment. The effect of conditioned media on osteoclastogenesis was evaluated by tartrate-resistant acid phosphatase (TRAP) staining and bone resorption pits analysis. OPG and RANKL mRNA expressions in osteoblastic cells and protein secretion in the conditioned media were analyzed with real-time PCR and ELISA assay, respectively. The role of OPG in Sr-mediated inhibition of osteoclastogenesis was further evaluated with anti-OPG antibody in pre-osteoclastic cells. The role of OPG in Sr-mediated uncoupling effects on osteoporotic bone was evaluated by an animal study. Ovariectomized rats were oral administrated with vehicle or Sr chloride for two months supplemented with anti-IgG antibody (control) or anti-OPG antibody. The effects of OPG neutralization after Sr treatment on bone metabolism were analyzed by microCT, bone his- tomorphometry and biochemical analysis. Results: The conditioned media derived from Sr-treated osteoblastic cells exerted a dose-dependent inhibito- ry effect on osteoclastic differentiation and resorptive activity in pre-osteoclastic cells. OPG mRNA expression and protein secretion in osteoblastic cells were significantly increased after Sr treatment. Neutralization with anti-OPG antibody abolished the inhibitory effect of conditioned media on RANKL-induced osteoclastogen- esis. The uncoupling effects of Sr treatment on trabecular bone were evidenced by greater bone volume and trabecular number, greater osteoid surface and bone formation rate, while less osteoclast surface. These effects were attenuated by the OPG neutralization by anti-OPG antibody injection. Conclusion: The evidences from the in vitro and in vivo studies suggested that OPG played an important role in the uncoupling effect of Sr on bone metabolism, possibly by acting as a cross-talk molecule between osteo- clasts and osteoblasts in response to Sr treatment.

Bone-implant-associated infections are common after orthopedic surgery due to impaired host immune response around the implants. In particular, when a biofilm develops, the immune system and antibiotic treatment find it difficult to eradicate, which sometimes requires a second operation to replace the infected implants. Most strategies have been designed to prevent biofilms from forming on the surface of bone implants, but these strategies cannot eliminate the biofilm when it has been established in vivo. To address this issue, a nonsurgical, noninvasive treatment for biofilm infection must be developed. Herein, a red-phosphorus-IR780-arginine-glycine-aspartic-acid-cysteine coating on titanium bone implants is prepared. The red phosphorus has great biocompatibility and exhibits efficient photothermal ability. The temperature sensitivity of Staphylococcus aureus biofilm is enhanced in the presence of singlet oxygen (1 O2 ) produced by IR780. Without damaging the normal tissue, the biofilm can be eradicated through a safe near-infrared (808 nm) photothermal therapy at 50 °C in vitro and in vivo. This approach reaches an antibacterial efficiency of 96.2% in vivo with 10 min of irradiation at 50 °C. Meanwhile, arginine-glycine-aspartic-acid-cysteine decorated on the surface of the implant can improve the cell adhesion, proliferation, and osteogenic differentiation.

Calcium phosphate cements (CPCs) have long been used as osteoconductive bone substitutes in the treatment of bone defects. However, the degradation rate of CPC is typically too slow to match the new bone growth rate. It is known that strontium increases the solubility of hydroxyapatite as well as exerts both anabolic and anticatabolic effects on bone. Therefore, we hypothesized that the incorporation of strontium would accelerate the degradation rate and enhance the osteoconductivity of CPC. In this study, Three groups, CPC (0% Sr-CPC), 5% Sr-CPC, and 10% Sr-CPC, were prepared, with the total molar ratio for Sr/(Sr+Ca) in the cement powder phase being 0, 5, and 10%, respectively. In the immersion test, less residual weight was observed in both 5% Sr-CPC and 10% Sr-CPC groups than CPC group. In addition, a higher osteoblastic cell proliferation rate and alkaline phosphatase activity were obtained in the strontium groups. In a rat femur bone defect model comparing CPC with 10% Sr-CPC, at 2 weeks postoperation, early endochondral ossification was found in the 10% Sr-CPC group, whereas only fibrous tissue was observed in control group; at 4–16 weeks postoperation, progressive osteoconduction toward the cement was observed in both groups. At 32 weeks, a higher peri-cement bone area and reduced cement area were noted in the 10% Sr-CPC group. In conclusion, in the 10% Sr-CPC group, strontium exerts dual effects on CPC: accelerating degradation rate and enhancing osteoconductivity, as shown here both in vitro and in vivo. © 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 103A: 1613–1621, 2015.