Search

We present a new decomposition approach for dual-energy computed tomography (DECT) called SIRZ that provides precise and accurate material description, independent of the scanner, over diagnostic energy ranges (30 to 200 keV). System independence is achieved by explicitly including a scanner-specific spectral description in the decomposition method, and a new X-ray-relevant feature space. The feature space consists of electron density, ${\rho _{\rm e}}$ , and a new effective atomic number, ${{\rm Z}_{\rm e}}$ , which is based on published X-ray cross sections. Reference materials are used in conjunction with the system spectral response so that additional beam-hardening correction is not necessary. The technique is tested against other methods on DECT data of known specimens scanned by diverse spectra and systems. Uncertainties in accuracy and precision are less than 3% and 2% respectively for the ( ${\rho _{\rm e}}$ , ${{\rm Z}_{\rm e}}$ ) results compared to prior methods that are inaccurate and imprecise (over 9%).

In this paper, we describe the work done in order to run the CT 3-D reconstruction algorithm on the 120 GB raw data from the more than 25\thinspace000 radiographs acquired from the Kongo Rikishi (XIII century) Japanese wooden statue. The work was done using the Microsoft (Redmond) HPC cluster and then on a local cluster at the INFN of Bologna. A speed-up factor of 75 was reached.

Over the last few years, staff from Lawrence Livermore National Laboratories and the NASA Ames Research Center have been collaborating on the inspection of various Thermal Protection System (TPS) articles (both test and flight) using X-ray computed tomography (CT). The work presented here shows how this powerful non-destructive inspection technique can be used to help understand the performance of TPS materials and designs. Three applications of before-and-after imagery are discussed in detail, including lessons learned, new insights, and questions remaining to be answered. These examples illustrate the promise of X-ray CT as an important technology deserving of routine application to research, development and production of thermal protection systems.

Gamma-ray computed tomography (CT) is potentially powerful nondestructive method for assessing the degree of distress that exists in reinforced-concrete structures. In a study to determine the feasibility of using CT to inspect reinforced-concrete specimens, we verified that CT can quantitatively image the internal details of reinforced concrete. To assess the accuracy of CT in determining voids and cracks, we inspected two fiber-reinforced concrete cylinders (one loaded and one unloaded) and a third cylinder containing a single reinforcing bar (rebar). To evaluate the accuracy of CT in establishing the location of reinforcing bars, we also inspected a concrete block containing rebars with different diameters. The results indicate that CT was able to revolve the many different phases in reinforced concrete (voids, cracks, rebars, and concrete) with great accuracy. 15 refs., 10 figs.

An efficient method for accurately calculating the center-of-rotation, or projection center, for parallel computed tomography projection data, or sinograms, is described. This method uses all the data in the sinogram to estimate the center by a least-squares technique and requires no previous calibration scan. The method also finds the object's center-of-mass without reconstructing its image. Since the method uses the measured data, it is sensitive to noise in the measurements, but that sensitivity is relatively small compared to other techniques. Examples of its use on simulated and actual data are included. For fan-beam data over 360 degrees , two related methods are described to find the center in the presence or absence of a midline offset. >

x-Ray computed axial tomography (CT) provides cross-sectional views of materials, components, and assemblies for industrial non-destructive evaluation. We have applied CT imaging to quantitatively measure the 3-D distribution ogf x-ray attenuation at reasonably high resolutions. In our industrial x-ray CT-studies, we have centered on two technical approaches: a first-generation translate/rotate CT system that consist of well-collimated (∼ 0.55 mm) photon source detector, and a third-generation scanner that uses a fluoroscopy detector.

A class of hybrid domain-iterative algorithms for 2-D image reconstruction is described. The consistent iterative reconstruction-reprojection (CIRR) algorithm was designed and implemented along with other classical domain-iterative methods. The algorithms are tested on the hollow projections problem, where simple object models are assumed known. Results show that the CIRR algorithm is robust and accurate, and converges quickly. >

An x-ray tomography system is being developed for high resolution inspection of large objects. The goal is to achieve 25 micron resolution over object sizes that are tens of centimeters in extent. Typical objects will be metal in composition and therefore high energy, few MeV x-rays will be required. A proof-of-principle system with a limited field of view has been developed. Preliminary results are presented.

As a result of an arms reduction treaty between the United States and the Russian Federation, both countries will each be storing over 40,000 containers of plutonium. To help detect any deterioration of the containers and prevent leakage, we are designing a digital radiography and computed tomography system capable of handling this volume reliably, efficiently, and at a lower cost.

Members of the Nondestructive Evaluation Section at the Lawrence Livermore National Laboratory (LLNL) are implementing the advanced three-dimensional imaging technique of x- and gamma-ray computed tomography (CAT or CT) for industrial and scientific obscured object evaluation. This technique provides internal and external views of materials, components, and assemblies nonintrusively. Our work includes building of CT scanners as well as data preprocessing, image reconstruction, display and analysis algorithms. These capabilities have been applied to a variety of industrial and scientific NDE applications. We have used CT to study various objects with obscured features at our laboratory ranging in size from 1 mm3 to 1 m3. In these studies, CT has revealed flaws (e.g. cracks, voids, and inclusions), internal and external dimensional information, differences in elemental composition or material density, and other important material characteristics. CT has also been used to localize, identify, and quantify radioisotopes within canisters. As illustrative examples, we describe how CT was instrumental in the analysis of concrete specimens, diesel engine thermocouple plugs, jet engine turbine blades, ballistic target materials, and radioactive waste canisters.© (1993) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.