Search

Small leaks in vacuum lines are detected by applying liquid-crystal coating, warming suspected area, and observing color change due to differential cooling by leak jet. Technique is used on inside or outside walls of vacuum-jacketed lines.

Technique involves coating suspected area with water-soluble black paint that gives even, infrared emission. Painted area is warmed with heat gun; an infrared scanner is used to detect cooled spot on jacket exterior. Introduction of atmospheric pressure into jacket intensifies leak jet and improves test sensitivity.

Brazing retort manifold minimizes air contamination, prevents gas entrapment during purging, and provides uniform gas flow into the retort bell. The manifold is easily cleaned and turbulence within the bell is minimized because all manifold construction lies outside the main enclosure.

Liquid trap seals thermocouple leads coming out of a brazing retort that operates with a controlled atmosphere so that air cannot enter the retort and hydrogen cannot escape. The trap is fastened to a duct welded to the retort. Thermocouple leads are led out through the duct and trap, with the fluid forming a gastight seal between the atmosphere and the retort.