Search

Exposure to elevated temperatures has detrimental effects on the properties of cementitious composites, leading to irreversible changes, up to total failure. Various methods have been used to suppress the deterioration of concrete under elevated temperature conditions. Recently, nanomaterials have been introduced as admixtures, which decrease the thermal degradation of cement-based composites after exposure to high temperatures. This paper presents a comprehensive review of recent developments related to the effects of nanoparticles on the thermal resistance of cementitious composites. The review provides an updated report on the effects of temperature on the properties of cement-based composites, as well as a detailed analysis of the available literature regarding the inclusion of nanomaterials and their effects on the thermal degradation of cementitious composites. The data from the studies reviewed indicate that the inclusion of nanoparticles in composites protects from strength loss, as well as contributing to a decrease in disruptive cracking, after thermal exposure. From all the nanomaterials presented, nanosilica has been studied the most extensively. However, there are other nanomaterials, such as carbon nanotubes, graphene oxide, nanoclays, nanoalumina or nano-iron oxides, that can be used to produce heat-resistant cementitious composites. Based on the data available, it can be concluded that the effects of nanomaterials have not been fully explored and that further investigations are required, so as to successfully utilize them in the production of heat-resistant cementitious composites. [ABSTRACT FROM AUTHOR]

In this contribution the effect of nanosilica (NS) on the behavior of cement mortars containing quartz aggregate and two types of heavyweight aggregates (magnetite and barite) exposed to elevated temperature will be investigated. The cement mortars have been modified with nanosilica in quantities of 1%, 2%, 3%, 4% and 5% (by weight of cement). The samples were exposed to the elevated temperatures of 200 °C, 400 °C, 600 °C and 800 °C, respectively. The mass loss, flexural and compressive strength of the cooled specimens were determined. Additionally, by means of scanning electron microscopy (SEM) and optical microscopy the structure defects have been determined. The results clearly demonstrate that there is an optimal nanosilica content, in the cement mortar containing quartz and magnetite aggregate, improving the thermal resistance and preventing the crack extension (especially in the range of 200–400 °C). However, the study has also shown that cement mortars containing barite aggregate tend to crack and exhibit spalling as a result of low thermal resistance of the aggregate. [ABSTRACT FROM AUTHOR]

This study presents the results of an experimental investigation of the effects of nanosilica (NS) on the strength development, transport properties, thermal conductivity, air-void, and pore characteristics of lightweight aggregate concrete (LWAC), with an oven-dry density <1000 kg/m3. Four types of concrete mixtures, containing 0 wt.%, 1 wt.%, 2 wt.%, and 4 wt.% of NS were prepared. The development of flexural and compressive strengths was determined for up to 90 days of curing. In addition, transport properties and microstructural properties were determined, with the use of RapidAir, mercury intrusion porosimetry (MIP), and scanning electron microscopy (SEM) techniques. The experimental results showed that NS has remarkable effects on the mechanical and transport properties of LWACs, even in small dosages. A significant improvement in strength and a reduction of transport properties, in specimens with an increased NS content, was observed. However, the positive effects of NS were more pronounced when a higher amount was incorporated into the mixtures (>1 wt.%). NS contributed to compaction of the LWAC matrix and a modification of the air-void system, by increasing the amount of solid content and refining the fine pore structure, which translated to a noticeable improvement in mechanical and transport properties. On the other hand, NS decreased the consistency, while increasing the viscosity of the fresh mixture. An increment of superplasticizer (SP), along with a decrement of stabilizer (ST) dosages, are thus required. [ABSTRACT FROM AUTHOR]

[Display omitted] • Natural and calcined Halloysite clay additives were characterised. • Halloysite clay additives were incorporated to modify AAMs' printing properties. • Enhanced compatibility of calcined Halloysite clay additives in the AAMs was verified. • Buildability and mechanical properties were improved in CH-modified AAMs. This study investigates the effects of natural and calcined halloysite clay minerals ("NH" and "CH", respectively) on the performance of 3D printed alkali-activated materials (AAMs). Halloysite clay minerals are selected as they are low-cost and abundantly available. At first, different characterisation techniques were employed to characterise the NH and CH additives. Mechanical performance, extrusion window, and shape stability of several AAM formulations containing various dosages (0.5 wt% to 5 wt%) of the NH and CH additives were evaluated. The best-performing mixtures in terms of fresh and hardened properties namely, NH-1.5 and CH-1.5 mixtures (containing 1.5 wt% of NH and CH additives, respectively) were then selected for 3D printing. The results showed that the CH-1.5 mixture exhibited enhanced shape stability, buildability, and mechanical properties as compared to the control mixture. The flexural and compressive strengths of 3D printed CH-1.5 samples were 88% and 40%, respectively higher than those of the printed control samples. Using the CH-1.5 mixture, a twisted column with an intricate shape was printed to verify the suitability of the developed CH-modified AAM for the construction of complex structures. This study establishes the use of halloysite clay minerals as low-cost additives for enhancing the mechanical properties and printing performance of AAMs. [ABSTRACT FROM AUTHOR]

It was shown that the uniform dispersion of nanoparticles into a cement matrix is a key issue in their application in the field. Therefore, here we compare two methods of incorporation of mesoporous silica nanospheres into cement using acetone (method A) or water (method B) as a dispersant, to reveal its influence on the mechanical properties of the formed composite. It was proven that in both cases, small amounts of silica nanoparticles agglomerates does not affect the mechanical properties of the cement mortars. However, the addition of mesoporous silica nanospheres to cement in an acetone solution is more effective and results in higher compressive and flexural strength than the sample of the composite formed from water solution of silica nanoparticles and cement. [ABSTRACT FROM AUTHOR]