Search

The potential of paper and paperboard as fiber-based materials capable of replacing conventional polymer-based materials has been widely investigated and evaluated. Due to paper's limited extensibility and inherent heterogeneity, local structural variations lead to unpredictable local mechanical behavior and instability during processing, such as mechanical forming. To gain a deeper understanding of the impact of mechanical behavior and heterogeneity on the paper forming process, the Finite Element Method (FEM) coupled with continuum modeling is being explored as a potential approach to enhance comprehension. To achieve this goal, utilizing experimentally derived material parameters alongside stochastic finite element methods allows for more precise modeling of material behavior, considering the local material properties. This work first introduces the approach of modeling heterogeneity or local material structure within continuum models, such as the Stochastic Finite Element Method (SFEM). A fundamental challenge lies in accurately measuring these local material properties. Experimental investigations are being conducted to numerically simulate mechanical behavior. An overview is provided of experimental methods for material characterization, as found in literature, with a specific focus on measuring local mechanical material structure. By doing so, it enables the characterization of the global material structure and mechanical behavior of paper and paperboard. [ABSTRACT FROM AUTHOR]

The primary aim of this research was to explore the feasibility of producing environmentally friendly composite materials by employing diverse hybrid matrices consisting of dammar natural resin, supplemented with small proportions of two synthetic resins: one epoxy and the other acrylic. A blend of paper and chicken feathers served as the reinforcing elements. The fabrication of these composite materials utilized a hand layup technique. Targeted for applications in the furniture industry or interior design, their mechanical properties were assessed through various tests. Specimens were obtained from the manufactured samples and subjected to evaluations for tensile strength, compression, flexure, vibrations, Shore hardness, and water absorption. Results indicated that irrespective of the testing method employed, the mechanical strength properties exhibited a decline with an increase in the percentage of dammar in the hybrid resins, whereas the elasticity properties demonstrated an increase with this percentage. [ABSTRACT FROM AUTHOR]

The optical and mechanical properties of secondary fibers of a new type of Russian office paper SvetoCopy Eco were studied after purification by various methods. The studied optical properties were whiteness, brightness, fluorescence, and opacity. Data for entrapment of toner in the samples were also given. The region of toner entrapment was distributed evenly during preliminary two-stage dry dispersion of the fibrous material, which led to a reduction in the whiteness and total removal of toner visible to the naked eye. It was experimentally established that the enzyme α-amylase increased the optical properties of the samples whereas their mechanical properties decreased insignificantly. Domestically manufactured enzymes were used for the first time during flotation of SvetoCopy Eco paper, which increased the practical significance of the results. The effect of two-stage dry dispersion, which practically completely removed entrapped toner, was studied. However, this reduced the whiteness and mechanical properties of the fibrous material. A complex of chemical reagents was used in experimental studies on toner removal. [ABSTRACT FROM AUTHOR]

Paper has been the most significant carrier of written information for many centuries. To prolong the life expectancy of papers, the polyurethane based on nanosilica was used to strengthen the paper fibers in this work. The relation between the mass concentration of polyurethane based on nanosilica and the specific properties of papers (e. g., folding endurance, tensile strength, tearing strength, whiteness and glossiness) were investigated. In addition, the effect of polyurethane based on nanosilica on the acid/alkali resistance and ageing resistance were studied. The results showed that polyurethane based on nanosilica could significantly improve the mechanical properties and ageing resistance of papers. [ABSTRACT FROM AUTHOR]

To improve the utilization rate of flax straw and the clean treatment of livestock manure, an experimental study was conducted on the process and performance of making fibre paper films by mixing cow dung and flax straw fibre. Cow dung and flax straw were used as the main raw materials, and functional additives were not added. The whole technological process of the pretreatment, the beating process, the determination of the beating degree, the basis weight of the paper, papermaking, drying, sample cutting, and the determination and analysis of the related mechanical properties of the film-making materials were studied. In this study, the Box–Behnken experimental design principle in the response surface methodology was adopted, and the effect of each factor on the tensile strength and tear strength of fibre paper film made of mixed fibres was determined using the combined experimental design comprising four factors and three levels centres. The results showed that the optimum technological parameters were as follows: the beating degree of the cow dung fibre was 37 °SR, the beating degree of the flax straw fibre was 85 °SR, the paper basis weight was 80 g/m2, and the addition of flax straw fibre was 65%. At a drying temperature of 80 °C and a drying time of 8 min, under the conditions of the hybrid fibre paper film placed in the laboratory environment (humidity of 30%~40%, temperature of 18 °C) for 24 h, the measured tensile strength was about 8.26 MPa, and the tear strength was about 19.91 N/mm. This study provides a reference that can be used for the further study of fibre paper film. [ABSTRACT FROM AUTHOR]

Disposal of large volumes of textile waste is an escalating problem for textile industries. Sisal spinning industry is the one of the textile industries releasing large volumes of textile waste in the landfills. The rising costs, and reduction of available space together with increasing stringent environmental measures are making burying and land filling of textile waste, a declining option. This study therefore explores recycling options where the potential of using sisal fiber waste produced during sisal spinning processes as raw materials for the production of paper pulp was investigated. Sampling was done at 21stCentury Holdings Limited allocated at Chang'ombe industrial street Dar es Salaam mainly dealer of sisal yarns production. Materials were prepared and cut into small pieces of about ½ inches to reduce the fiber into unit lengths so as to achieve pulping required performance. Pulping process was achieved through Soda pulping techniques with two different effective alkali charges (EA-20% and EA-24%) for 240 minutes under maximum temperature 140°C, and liquor to fiber ratio 4:1by using Mathis Labomat dyeing Machine. The kappa number obtained was (25.5, 34.5) for material treated under EA 24% and EA 20% respectively, Percentage pulp yield were (47.1, 54.4) for EA 24% and EA20% pulp respectively. Freeness (630CFS, 555CSF) after refining at 4500 rpm. Finally, the resulting pulp was used for hand sheet making and the sheets were tested for their mechanical properties; Grammage (61.1, 61.1) g/m2, Tensile index (9.9, 22.3) Nm/g, Tear index (13.3, 17.4) Nm2/g, burst index (1.7, 3.7 and 1.6) kPa.m2/g and Elongation at break (2.02, 2.22) % for EA24% pulp, EA20% pulp respectively. The findings shows that sisal fiber wastes have a promising potential for paper pulp production compared to other non-wood raw material. [ABSTRACT FROM AUTHOR]

Cellulose is classified as one of the most abundant biopolymers in nature. Its excellent properties have gained a lot of interest as an alternative material for synthetic polymers. Nowadays, cellulose can be processed into numerous derivative products, such as microcrystalline cellulose (MCC) and nanocrystalline cellulose (NCC). MCC and NCC have demonstrated outstanding mechanical properties owing to their high degree of crystallinity. One of the promising applications of MCC and NCC is high-performance paper. It can be utilized as a substitute for the aramid paper that has been commercially used as a honeycomb core material for sandwich-structured composites. In this study, MCC and NCC were prepared by extracting cellulose from the Cladophora algae resource. MCC and NCC possessed different characteristics because of their distinct morphologies. Furthermore, MCC and NCC were formed into a paper at various grammages and then impregnated with epoxy resin. The effect of paper grammage and epoxy resin impregnation on the mechanical properties of both materials was studied. Then, MCC and NCC paper was prepared as a raw material for honeycomb core applications. The results showed that epoxy-impregnated MCC paper outperformed epoxy-impregnated NCC paper with a compression strength of 0.72 MPa. The interesting result from this study is that the compression strength of the MCC-based honeycomb core was comparable to the commercial ones despite being made of a natural resource, which is sustainable and renewable. Therefore, cellulose-based paper is promising to be used for honeycomb core applications in sandwich-structured composites. [ABSTRACT FROM AUTHOR]

For the mechanical properties of paper, tensile testing has been widely used. Among the tensile properties, the tensile stiffness has been used to determine the softness of low-density paper. The lower tensile stiffness, the greater softness of paper. Because the elastic region may not be clearly defined in a load-elongation curve, it is suggested to use the tensile modulus which is defined as the slope between the two points in the curve. The two points which provide the best correlation with subjective softness evaluation should be selected. Low-density paper has a much lower tensile strength, but much larger elongation at the break. It undergoes a continuous structural change during mechanical testing. The degree of the structural change should depend on tensile conditions such as the sample size, the gauge length, and the rate of elongation. For low-density paper, the tensile modulus and the tensile strength should be independent of each other. The structure efficiency factor (SEF) is defined as a ratio of the tensile strength to the tensile modulus and it may be used a guideline in developing superior low-density paper products.

Paper-based friction material is a typical paper-based composite that is usually cured via hot-pressing. This curing method does not account for the effect of pressure on the matrix resin, resulting in uneven distribution of resin in the material and reducing the mechanical properties of friction materials. To overcome the above shortcomings, a pre-curing method was introduced before hot-pressing, and the effects of different pre-curing degrees on the surface morphology and mechanical properties of paper-based friction materials were studied. The pre-curing degree significantly affected the resin distribution and interfacial bonding strength of the paper-based friction material. When the material was cured at 160 °C for 10 min, the pre-curing degree reached 60%. At this point, most of the resin was in a gel state, which could retain abundant pore structures on the material surface without causing mechanical damage to the fiber and resin matrix during hot-pressing. Ultimately, the paper-based friction material exhibited improved static mechanical properties, decreased permanent deformation, and reasonable dynamic mechanical properties. [ABSTRACT FROM AUTHOR]

Controlled tailoring of mechanical property and wettability is important for designing various functional materials. The integration of these characteristics with waste materials is immensely challenging to achieve, however, it can provide sustainable solutions to combat relevant environmental pollutions and other relevant challenges. Here, the strategic conversion of discarded and valueless waste paper into functional products has been introduced following a catalyst‐free chemical approach to tailor both the mechanical property and water wettability at ambient conditions for sustainable waste management and controlling the relevant environmental pollution. In the current design, the controlled and appropriate silanization of waste paper allowed to modulate both the a) porosity and b) compressive modulus of the paper‐derived sponges. Further, the association of 1,4‐conjugate addition reaction between amine and acrylate groups allowed to obtain an unconventional waste paper‐derived chemically 'reactive' sponge. The appropriate covalent modification of the residual reactive acrylate groups with selected alkylamines at ambient conditions provided a facile basis to tailor the water wettability from moderate hydrophobicity, adhesive superhydrophobicity to non‐adhesive superhydrophobicity. The embedded superhydrophobicity in the waste paper‐derived sponge was capable of sustaining large physical deformations, severe physical abrasions, prolonged exposure to harsh aqueous conditions, etc. Further, the waste paper‐derived, extremely water‐repellent sponges and membranes were successfully extended for proof‐of‐concept demonstration of a practically relevant outdoor application, where the repetitive remediation of oil spillages has been demonstrated following both selective absorption (25 times) of oils and gravity‐driven filtration‐based (50 times) separation of oils from oil/water mixtures at different harsh aqueous scenarios. [ABSTRACT FROM AUTHOR]

Geopolymer concrete has been developed as a means of reducing carbon dioxide (CO2) emissions due to concrete manufacturing, which account for around 5-10% of the total global CO2 emissions. Additionally, this innovative material aims to utilize industrial waste as a sustainable resource. This study concentrates on developing a geopolymer mortar composition comprising 70% fly ash and 30% metakaolin. The mixture also includes 14 molars of sodium hydroxide, sodium silicate, saturated surface dry sand, water at a volume of 10% of the mix, and 1.5% superplasticizer. The solution-to-solid materials ratio was established at 0.55 while the ratio between sodium silicate and sodium hydroxide was established at 2.5:1. The geopolymer mortar was enhanced by rice husk fibers at varying volume percentages of 1%, 1.5%, and 2%. Additionally, waste paper, in the form of paper ash, was introduced as filler at a volume percentage of 5%. Following the demolding process, the specimens were cured in the controlled environment of an oven, with the temperature set at 60 °C for a period of 24 hr. Subsequently, the cured samples were stored for 7 and 28 days and then were tested. When different amounts of rice husk fibers were mixed in with a fixed amount of 5% paper ash, the flexural resistance of the geopolymer mortar increased significantly. After 7 days of curing, it was seen that the flexural strength experienced an increase of 4%, 13%, and 25%, and a further increase of 11%, 18%, and 31% after 28 days of curing. The results of the impact test showed a notable enhancement in impact resistance and energy absorption when incorporating paper ash and rice husk fibers. Specifically, the initial crack results exhibited a 50% rise, while the specimen failure after 28 days of curing showed a 66% improvement. [ABSTRACT FROM AUTHOR]

Paper pulp was produced by the kraft method using sorghum (Sorghum bicolor × S. bicolor sudanense) as the fibrous raw material. Two groups were cooked using active alkali at 10% and 14%. For each group, five sulfite ratios (0, 4, 8, 12, and 16%) were used, making a total of 10 different groups that were cooked. A literature study was conducted to determine the cooking temperature, the time needed to reach the maximum temperature, and the duration of cooking time at the maximum temperature. A total of 30 batches of paper were obtained from pulps without beating and from pulps beaten at values of 35 ± 2 °SR and 50 ± 2 °SR (Schopper Riegler) freeness. The aim was to determine the most suitable alkali and sulfite ratios by conducting standard tests for the yield, kappa number, and viscosity of the screened pulps and for the papers obtained from these pulps. The highest screened yield of cooked pulp was obtained under conditions of 14% active alkali and 12% sulfite. Since the mechanical properties of the paper obtained from this pulp were satisfactory when compared with those in the literature, it was concluded that these ratios could be recommended as a condition for cooking. [ABSTRACT FROM AUTHOR]

Highlights • Mechanical properties of waste papers are closely correlated with devolatilization. • Start of devolatilization caused a sudden decrease in relative storage modulus ( E ′ r). • Kinetics of storage modulus change is investigated referring to activation energy. • E ′ r can be predicted with mass loss ratio and CO 2 emission. Abstract This article details a correlation study on early devolatilization behaviors (drying & volatile emission at 25–240 °C) and the change in mechanical properties (expressed by viscoelasticity) of four types of waste papers. The early stage of devolatilization was investigated using the TG-FTIR and mechanical properties using the dynamic mechanical analysis (DMA) method. The results show that the elastic and viscous mechanical properties showed obvious correlations with free and bound water evaporation and volatile emission. The storage modulus (E ′) and loss modulus (E ″) of the papers decreased as temperature increased and at the two important temperatures, namely 100 °C, the start of bound water evaporation, and 150 °C, the start of devolatilization in TG & DTG curves, E ′ showed extrema. Especially the relative storage modulus ( E ′ r) exhibited a sudden decrease at around 150 °C, where the activation energy of thermochemical conversion jumps from low values to high values, indicating the start of devolatilization. CO 2 is the major compound of the volatiles and it is well correlated with E ′ r in exponential function model and can be used as an index for predicting the E ′ r of the waste papers in their early devolatilization stage; while during the drying stage, mass loss ratio can be used to predict E ′ r of the waste papers. [ABSTRACT FROM AUTHOR]

The title of the current Special Issue, "Feature Papers in Materials Simulation and Design", has identified the aims of this collection since its opening: the gathering of research works and comprehensive review papers that advance the understanding and prediction of material behavior at different scales, from atomistic to macroscopic, through innovative modeling and simulation. The paper by Chen et al. [[4]] aimed at studying the thermal properties and thermoelectric performance of imidazole-graphyne (ID-GY) by combining first principle calculations with the Boltzmann transport theory. The last paper by Cheng and Vescovini [[16]] presented instead an accurate and efficient numerical method for the analysis and design of Variable Stiffness (VS) laminates. Civalek et al. [[11]] developed an efficient eigenvalue algorithm for the axial vibration analysis of embedded short-fiber-reinforced micro-/nano-composite rods subjected to arbitrary boundary conditions. [Extracted from the article]

A crucial problem for laminate producers is the dimensional instability of decorative papers during soaking in aqueous solutions, but the source of this dilemma is not completely understood yet. In this study, eight commercial decorative papers of similar fiber composition and sizing were analyzed for their structural, physical, and mechanical properties. These properties were examined for their correlations to the dimensional stability of papers when moistened, as assessed by the wet stretch dynamics. Structure-to-property relationships were evaluated by principal component analysis (PCA). Within the set of parameters examined, PCA revealed that fiber orientation and the content of fillers/pigments influenced the wet expansion of paper web and affected its margins and dimensions in longitudinal and transverse directions of the paper machine. These variables are discussed within the context of decorative paper engineering in order to produce high performance papers with regular wet expansion properties. [ABSTRACT FROM AUTHOR]

The aim of the study was to investigate the impact of three types of polysiloxane microspheres on the barrier properties, structure and mechanical properties of paper. An influence of new silicon filler on properties of cellulose paper sheet was analyzed. Polysiloxane microspheres were used as an additive introduced into the network of cellulosic fibers in order to obtain new functional properties of the paper. The following types of microspheres were used in the research: M1 hydrophilic of average diameter 23.5 µm, M2 hydrophobic of average diameter 3.1 µm and M3 hydrophobic of average diameter 23.5 µm. The obtained handsheets were analyzed for changes in apparent density, roughness, tensile strength, bursting strength, and tear resistance. Wettability and resistance to liquid were characterized by contact angle measurement, penetration dynamics analysis and uniformity of liquid penetration measured using an extended liquid penetration analyser. It was found that the presence of M2 (small diameter) microspheres improved significantly the paper's hydrophobicity without changing the mechanical properties. The addition of M1 and M3 (large diameter) microspheres decreased the mechanical properties of the paper samples and did not improve their hydrophobicity. However, M1 microspheres resulted in increased uniformity of liquid penetration through the paper structure. The presented studies also show that it is possible to obtain paper with high hydrophobic properties only through the filling application when polysiloxane microspheres are used for this purpose. The results also indicate that it is not necessary to hydrophobize the entire material structure in order to achieve its high hydrophobicity. [ABSTRACT FROM AUTHOR]

We report on investigation of the mechanical properties of paper electronics (printed and made out of paper). One key objective of such paper electronics is to achieve ultraflexibility. Therefore, it is important to understand electrical functionality and reliability of paper electronics under various physical (mechanical) deformations. Here, we show the general mechanical properties of the cellulose paper used and its electrical behavior under applied strain, tackling the main effects that need to be identified when building paper-based systems, from product performance and stability perspective. An overview of the stress–strain behavior of silver ink on paper is discussed, and then, we tackle a more specific analysis of the performance variations of paper sensors made with recyclable household materials when exposed to various mechanical conditions of tensile and compressive bending. This paper is important for developing stable wearable sensors for incorporation into Internet of Everything applications. [ABSTRACT FROM PUBLISHER]

Power transformers use Kraft paper, thermally upgraded Kraft and other polymeric papers (ex. Nomex) as the main solid insulation between the winding conductors. Dielectric oil used in transformers as an insulating and cooling fluid typically has an operating temperature range of 60-90 °C. These service temperatures can cause slow degradation of both the oil and the insulating paper winding, with a loss of mechanical and dielectric properties. In this sense, this work analyzes paper degradation through Young’s Modulus, yield stress, rupture strength and strain under ultimate strength. An accelerated thermal ageing of the paper in mineral oil was carried out at temperatures of 110, 130 and 150 °C over different periods of time, in order to obtain information on the kinetics of the ageing degradation of the paper. The evolution of the mechanical properties and micro mechanisms of paper failure are analysed as a function of temperature and ageing time. Finally, the results obtained are compared with the traditional method of degradation analysis, based on the degree of polymerisation measurement. [ABSTRACT FROM AUTHOR]

The mechanical performance of two commercial papers used as solid insulation in power transformers, namely standard Kraft and a thermally upgraded Kraft paper, were studied during accelerated aging in Luminol oil at 170 ?C. The results show a relationship between the degree of polymerization and the mechanical properties measured by tensile testing. A linear relationship was found between the mechanical properties of paper, the tensile index (Tidx), and the concentration of methanol present in the oil. The methanol chemical marker has been proven to be an accurate assessment tool for the aging of cellulosic paper. The results show a promising tool for correlating the methanol concentration in oil, as an indirect indicator, with the mechanical performance of the paper. This approach can be used to monitor the real state of the cellulose chains in the power transformer insulation paper. [ABSTRACT FROM AUTHOR]

The cost of specialized scientific equipment can be high and with limited funding resources, researchers and students are often unable to access or purchase the ideal equipment for their projects. In the fields of materials science and mechanical engineering, fundamental equipment such as tensile testing devices can cost tens to hundreds of thousands of dollars. While a research lab often has access to a large-scale testing machine suitable for conventional samples, loading devices for meso- and micro-scale samples for in-situ testing with the myriad of microscopy tools are often hard to source and cost prohibitive. Open-source software has allowed for great strides in the reduction of costs associated with software development and open-source hardware and additive manufacturing have the potential to similarly reduce the costs of scientific equipment and increase the accessibility of scientific research. To investigate the feasibility of open-source hardware, a micro-tensile tester was designed with a freely accessible computer-aided design package and manufactured with a desktop 3D-printer and off-the-shelf components. To our knowledge this is one of the first demonstrations of a tensile tester with additively manufactured components for scientific research. The capabilities of the tensile tester were demonstrated by investigating the mechanical properties of Graphene Oxide (GO) paper and thin films. A 3D printed tensile tester was successfully used in conjunction with an atomic force microscope to provide one of the first quantitative measurements of GO thin film buckling under compression. The tensile tester was also used in conjunction with an atomic force microscope to observe the change in surface topology of a GO paper in response to increasing tensile strain. No significant change in surface topology was observed in contrast to prior hypotheses from the literature. Based on this result obtained with the new open source tensile stage we propose an alternative hypothesis we term ‘superlamellae consolidation’ to explain the initial deformation of GO paper. The additively manufactured tensile tester tested represents cost savings of >99% compared to commercial solutions in its class and offers simple customization. However, continued development is needed for the tensile tester presented here to approach the technical specifications achievable with commercial solutions. [ABSTRACT FROM AUTHOR]

It was found beneficial to manufacture bacterial cellulose (BC) obtained from waste food sources to create value-added packaging products by firstly performing purification and disintegration processing of the BC and then reinforcing it with paper pulp. The purification treatment involved using sodium hydroxide (2% w/v at 100°C for 1 h) on BC pulp to remove the bacterial protein and the resulting cultured medium film was characterized with respect to its physical properties. An acid treatment on the purified BC pulp was applied to disintegrate cellulose network before forming a film. The results showed that the sodium hydroxide treatment increased the film burst index and brightness. Heating the BC pulp to 70–100°C in 1.25–5.00% v/v sulfuric acid treatment for 30 min degraded the film’s mechanical properties. Also, a study of the addition and mixing of paper pulps or modified cationic starch to the BC was found to improve the film properties with respect to packaging properties. Inclusion of short fiber paper pulp by 30 wt.% created a good synergistic effect by improving the mechanical properties of film especially for tear strength. Moreover, cationic-modified cassava starch (2% w/w) improved the tensile and burst index as well as resistance to oxygen permeation of the BC film. The results indicate that the BC pulp could be used to improve mechanical properties and resistance to water vapor and oxygen permeation of the short fiber paper pulp film which is ideal for packaging materials. [ABSTRACT FROM AUTHOR]

Fungi damage valuable documents mechanically, chemically and aesthetically because they form hyphae, excrete pigments and organic acids, generating particular local conditions that modify the physical-chemical properties of the different documentary supports. The aims of this research were to determine the fungal genera associated with the paper documents biodeterioration and to demonstrate the biofilm formation and the damages. Sampling was done from documents with signs of biodeterioration using sterile cotton swabs. After serial dilutions from the samples, plates with Extract Malt Agar were inoculated and incubated at 30 °C for 7 days. Additional little fragments of the damage zone from each analyzed document were observed using stereomicroscopy, environmental scanning electron microscopy (ESEM) and scanning electron microscopy (SEM). To evaluate the biodeterioration potential risk the strains were grown on cellulose, the acids production and pigments secretion were evaluated too. The genera Aspergillus, Cladosporium, Fusarium and Scopulariopsis were predominant. Isolated strains excreted acids into the culture medium; most of them grew well on cellulose and a few excreted pigments. The formation of a mature biofilm and the production of extracellular polymeric substances by fungi, as well as a dense biofouling mainly formed by dust mites, were evidenced by the SEM and ESEM observations. Also the observations showed that these strains were able to attach to paper fibre causing damage on them. The observation under optical microscopy of dead insect found inside the book showed fungal adhesion on the insect body and SEM support that this adhesion was formed by Aspergillus sp. [ABSTRACT FROM AUTHOR]

The aim of this study was to evaluate some physical and mechanical properties of the paper mill (PMS) and spruce planer shaving added cement boards. Also the effect of sludge type in consequence of waste water treatment technique on properties of wood-cement boards (WCB) was investigated. The wood/cement ratios were used as 1/3, based on the oven dry weight for the WCB manufacture. PMS was used up to 20% wt of total composite based on organic (wood) and inorganic (cement) amounts. Black sludge has shown more improvement than grey sludge on properties of WCBs, which indicates the anaerobic waste treatment technique is more effective for additive in WCB. The modulus of rupture and elasticity values of the WCBs with 5% of grey sludge, 5% and 10% of mixture of grey and black sludge were acceptable limits according to EN 634-2 standard. The mechanical strengths of all WCBs with black sludge were found above the specified EN standard. This suggests that PMS depending on sludge type may be used up to 20% wt of total composite weight for the commercial production of WCBs, which could expand the raw material base for this panel product. [ABSTRACT FROM AUTHOR]

Several low-density crumpled paper-based materials were fabricated by varying both the volume fraction and the geometry and mechanical properties of paper sheets. Their 3D architecture was investigated using X-ray microtomography. Microstructure descriptors such as the pore size distribution, the mean curvature distribution and the volume fraction of ordered domains were finely analyzed. Their mechanical properties were also assessed using uniaxial compression tests. Our results showed that crumpled materials exhibited a particular porous microstructure with a reproducible mechanical behavior between foams and entangled fibrous materials. Their compressive behavior was characterized by successive elastic, strain-hardening and densification regimes. The effects of the geometry, microstructure and mechanical properties of the sheets on the process-induced microstructures and mechanical performances were discussed. In particular, a simple micromechanical approach was used to estimate analytically and from the 3D images the role of ridges and ordered domains on the mechanical properties of crumpled papers. The evolution of their Young's moduli and yield stresses were studied as a function of their relative densities and compared with experimental data available in the literature for other cellular materials, showing that crumpled papers are promising renewable alternatives to standard polymer foams for several engineering applications, due to the proper combination of mechanical properties, porosity, cost, and easy fabrication. [ABSTRACT FROM AUTHOR]

This paper reports the temperature-dependence of methanol generation and the tensile index under ageing conditions for two paper/oil systems: one consisting of a standard wood Kraft paper and the other of a thermally-upgraded Kraft paper (TUK). A linear correlation between methanol and the tensile index for these paper/oil systems was observed in a previous study at 170 °C. In the current study, the correlation was extended to a large range of temperatures (150-190 °C). The experimental data were fitted with a modified Calvini's kinetic model, while the Arrhenius equation was used to model the kinetic of changes of the paper's mechanical properties during ageing. Good agreement with the temperature ( lnk vs. 1/ T) was observed for the rate constants of the chain-end group production, methanol formation, and the decrease of mechanical properties. The Arrhenius equation applied to this data grouping showed activation energy of 130 ± 29 kJ/mol for the decrease in mechanical strength of the standard Kraft paper, while the value was 118 ± 55 kJ/mol for the TUK paper. These values are of the same order of magnitude as those obtained in this study and in the literature for the depolymerization of cellulose and the generation of methanol that was reported. This confirmed the close relationship between cellulose depolymerization, methanol generation and the reduction of the paper's mechanical strength during ageing, dominated by the acid hydrolysis mechanism. The results, which can be seen as a benchmark and pave the way to further research, provide an opportunity for applying the proposed correlations to estimate the insulation condition in operating transformers. [ABSTRACT FROM AUTHOR]

Natural fiber, gas permeability, Agave leaf, natural film, Mexican traditional film, Mexican gastronomy Keywords: Agave leaf; natural film; natural fiber; gas permeability; Mexican traditional film; Mexican gastronomy EN Agave leaf natural film natural fiber gas permeability Mexican traditional film Mexican gastronomy 6902 6908 7 11/17/22 20221215 NES 221215 Introduction Agave is one of the most important natural resources in Mexico in economic, social, and agro-ecological terms, it is a crop used mainly for the production of alcoholic beverages. The mixiote leaf also known as I mixiote paper i is the epidermis of the agave leaf, this is carefully separated from the plant to obtain a translucent and thin membrane. [Extracted from the article]

The physical and mechanical properties of cement bonded board produced from Chasmanthera dependens and waste paper was investigated in this study. Boards were produced at 50:50, 60:40 and 70:30 levels of blending proportions of paper-fiber by weight, 800kg/mm³ and 1000kg/m³levels of board density and a constant mixing ration of 4:2 of cement-paper and fiber respectively. The boards were cut into test samples and physical and mechanical tests were carried out. The effect of Blending Proportion and Board Density on Water Absorption (WA), Thickness Swelling (TS), Modulus of Rupture (MOR) and Modulus of Elasticity (MOE) were determined using British standard 373. The mean values for WA ranged from 6.45-14.60%, TS ranged from 0.17-3.71%, MOE ranged from 93.90-946.03Nmm² while MOR ranged from 0.30-2.02Nmm2. The results showed that increase in board density and blending proportion led to decrease in TS and WA but also resulted in increase in MOE and MOR. The study suggests that Chasmanthera dependens and waste paper are suitable for the manufacture of cement board. [ABSTRACT FROM AUTHOR]

A simple mechanical model for paper comprising only isotropic cell-wall cellulose and a single elliptical pore is presented. Finite element method analysis applied to this model produced two stress-strain curves equivalent to the anisotropy observed in machine-made paper. Nissan's hydrogen-bond domination theory for cell- wall material with a density of 1000 kg/m³ provided the stress-strain functionality to control the displacement of the mesh nodes. Experimental data were collected from a single roll of paper produced on a pilot machine run where formation was decreased in five steps. Fiber properties, sheet grammage, and density were held constant in the final paper. Regardless of the level of formation, all breaking stress and strain data fell into one of two stress-strain curves, a machine-direction curve and a cross-direction curve. The initial modulus of each stress-strain curve was used to estimate the shape of the elliptical pore used in the finite element method model. The results for the model matched the results from the experimental data. Application: The study demonstrates to papermakers the primary importance of setting up a paper machine to maximize sheet properties. Setup of a paper machine may be a less expensive alternative than making furnish changes to maximize sheet properties. [ABSTRACT FROM AUTHOR]

Strain sensors which are embeded in AMOLED are introduced and studied in this paper. High accuray strain sensing are achieved, resolution of the sensors are about 0.05%. By combing the strain sensors in the panel, mechanical behaviors can be monitored and studied in real time. The snesors are used to conduct the foldable AMOLED mechanical and reliability study. Dynamic and static strains and related mechanism are introduced and discussed. Finite element simulation models considering the mechanical properties of materials including hyperelasticity, viscoelasticity and creep are established. Finally, the strain sensors and finite element anlysis are combined to study the mechanical response of AMOLED under dynamic folding, static folding, and different temperature and humidity environments. [ABSTRACT FROM AUTHOR]

The influence of temperature and relative humidity on the moisture content of paper honeycomb sandwich panels was studied, and the ideal three-dimensional diagram between the moisture content of paper honeycomb sandwich panels and the temperature and relative humidity was constructed by the GAB model. The evaluation equation of critical stress and plateau stress were obtained. The results indicate that the moisture content of paper honeycomb sandwich panels rises with the increase of relative humidity and declines with the increase of temperature; as the moisture content increases, the critical stress and plateau stress of paper honeycomb sandwich panels decline linearly; with the increase of the moisture content, the energy absorption of paper honeycomb sandwich panels increased firstly and then decreased; the evaluation equation of critical stress and plateau stress can predict the mechanical properties of paper honeycomb sandwich panels in different temperatures and relative humidities. [ABSTRACT FROM AUTHOR]

Predicting paper properties based on a limited number of measured variables can be an important tool for the industry. Mathematical models were developed to predict mechanical and optical properties from the corresponding paper density for some softwood papers using support vector machine regression with the Radial Basis Function Kernel. A dataset of different properties of paper handsheets produced from pulps of pine (Pinus pinaster and P. sylvestris) and cypress species (Cupressus lusitanica, C. sempervirens, and C. arizonica) beaten at 1000, 4000, and 7000 revolutions was used. The results show that it is possible to obtain good models (with high coefficient of determination) with two variables: the numerical variable density and the categorical variable species. [ABSTRACT FROM AUTHOR]

In papermaking, blending or mixture of fibres is one of the ways to enhance mechanical properties of paper. The objective of this study was to evaluate the properties of paper manufactured from mixture of oil palm empty fruit bunch (EFB) and kenaf fibres. The papers were prepared according to 10, 30, 50 and 70 percentages of kenaf whole stem blended into oil palm empty fruit bunch fibres. The preparation and testing of papers were carried out based on TAPPI Test Methods. Results showed that using kenaf whole stem fibres improved the mechanical properties of the blended papers and complied with the standard requirement for writing and printing grade paper. [ABSTRACT FROM AUTHOR]

Ignition of waste paper sludge at elevated temperatures to produce electricity in power generation plants utilizing fluidized bed combustion generates paper sludge ash. Due to the high concentration of lime and gelignite in paper sludge ash, it is expected that it will play a vital role as a cementitious material. This paper investigates the use of paper sludge ash to improve the mechanical properties of the granular materials, which are suitable to subbase course for road and building constructions. Also, a comparison study with the use of Portland cement as an additive to granular materials has been covered. The mechanical properties were evaluated by conducting the California bearing ratio test for the two adopted methods. Moreover, the compressive strength of the samples using paper sludge ash and cement are investigated. In accordance to the California bearing ratio test, 4% paper sludge ash was indicated as the optimum ash content at which the California bearing ratio value increased by 173% and 111% in comparison with untreated material and 6% cement, respectively. On the other hand, and by means of the compressive strength, the granular materials with 4% paper sludge ash has compressive strength higher than those with 6% cement. [ABSTRACT FROM AUTHOR]

• Three-dimensional WO 2 /MoO 2 @P, N-CNTs were prepared by the Self-template method. • Highly conductive and hollow structure of WO 2 /MoO 2 @P, N-CNTs avoided aggregation of NiCo-LDH. • IMSC devices were prepared by fully screen-printed technology. • IMSCs demonstrated excellent energy density (0.0590 mWh cm−2), cycling stability (100% capacity retention after 10,000 cycles) and mechanical stability (lighting the bulb under extremely distorted conditions). In-plane micro-supercapacitors (IMSCs) have greater promise for use in flexible wearable electronics than traditional stacked configurations due to their ease of integration and conformability. Nickel-cobalt layered double hydroxide (NiCo-LDH) has garnered significant interest as a stellar material for supercapacitors because of its affordable price, regular morphology, and high theoretical capacity. Unfortunately, the intrinsic poor conductivity of LDH materials prevents supercapacitors from achieving long-term stable cycling and the desired energy density. This research successfully applies the self-templated approach to prepare carbon nanotubes (CNTs) with heterogeneous architectures and numerous phase interfaces, thereby mitigating this disadvantage. Carbon nanosheets adorned with WO 2 and MoO 2 nanoparticles assemble the CNT with a typical three-dimensional structure. When combined with LDH in a suitable ratio, the composite electrode's conductivity significantly improves, providing increased capacity and cycling stability. Compared to commercial CNTs, the larger size of the prepared WO 2 /MoO 2 @P, N-CNTs serves a superior supporting and connecting role, thereby preventing the NiCo-LDH from aggregating. Under the best conditions, the composite electrode demonstrates a capacity of 1237 C/g at 1 A g−1 and an optimal capacity retention of more than 92%. For the IMSC devices, the composite materials as the positive electrode achieve an energy density of 0.0590 mWh cm−2, and no capacity degradation is observed after 10,000 cycles. In addition, bending tests have demonstrated the mechanical stability of the IMSCs. Therefore, this strategy of mixing highly conductive WO 2 /MoO 2 @P, N-CNTs can effectively improve the conductivity of the composite material and the mechanical properties of the overall device. Furthermore, this concept can be further extended to the preparation and application of other wearable devices. [ABSTRACT FROM AUTHOR]

Mechanical properties of fiber-based materials, such as paper, are governed by the heterogeneous microstructure induced by the formation process. For example, in paper materials during tensile tests, lower strains are observed in the flocs (fiber aggregates where the basis weight is larger than the average one) than in the antiflocs (complement of flocs). To explain such behavior, we investigated the mechanical and structural properties of both flocs and antiflocs. Using tensile tests on flocs and antiflocs, we measured their elastic modulus and found that the elastic modulus of flocs was larger than the antiflocs' one. To understand these differences, a multiscale structural analysis was conducted on 3D X-ray images of flocs and antiflocs at two different spatial resolutions. We found that the floc was thicker than the antifloc, whereas the microscale analysis showed the studied floc and antifloc exhibited the same bulk porosity. Then, it was concluded that the difference in elastic modulus between flocs and antiflocs is mainly due to their thickness difference. [ABSTRACT FROM AUTHOR]

Multilayer panels that have paper cores with hexagonal cells continue to have a limited application in furniture production. In contrast, there are no sandwich honeycomb panels with cores containing rectangular cells employed in this industry. Such cores should distinguish themselves by strong orthotropic advantages, in particular, for designing shelves and partitions of cabinet furniture. Hence, the objective of this study was to determine the effect of core rectangular paper cells on the mechanical properties of three-layer furniture panels. The authors decided to ascertain relative density and elasticity constants of the designed cells. The results of empirical experiments of cell elasticity moduli were compared with the results of the analytical calculations. The impact of sample width on their mechanical properties was determined. It was demonstrated that cores with hexagonal cells in furniture panels could be replaced by cores with rectangular cells. [ABSTRACT FROM AUTHOR]

Preservation of documentary heritage is one of the biggest challenges facing paper conservators today. The singular properties of bacterial cellulose (BC) lead us to propose to reinforce paper with BC sheets. In the first part of this study, the reinforcing capability of BC was tested on model papers of well-known fiber composition. The aim of the present study was to verify the suitability of rebuilding degraded old papers with BC. The degraded papers were characterized before and after the reinforcement. In addition, lined samples were characterized before and after an aging process in order to study the stability in time. The same methodology was used with Japanese paper (JP), a material commonly used by paper conservators, in order to compare both materials as reinforcement. Mechanical properties of paper lined with BC are as good as those obtained with JP. Papers lined with BC have more marked modifications on their optical properties than those restored with JP. Nevertheless, letters in books lined with BC are more legible. Moreover, only the papers restored with BC show high changes in porosity. The aging process leads to a slight decrement in burst index. Changes on tear index and optical properties with the aging process depend on the paper to be restored. This study suggests that BC improves deteriorated paper quality, without altering the information contained therein, and that this improvement is maintained over time. Hence, BC is a promising alternative material for the restoration of paper. [ABSTRACT FROM AUTHOR]

Copyright of Fibres & Textiles in Eastern Europe is the property of Sciendo and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Developing highly efficient electromagnetic interference (EMI) shielding materials with outstanding mechanical properties are urgently desirable for portable device hardware and flexible electronic devices. Herein, a highly conductive and flexible silver nanowires/graphene nanosheets/cellulose (AgNWs/GNSs/cellulose) composite paper with particular three‐layered structures is fabricated via vacuum assisted filtered and coating method. The prepared composites exhibit excellent EMI shielding property due to the unique layered structure. By changing the order of the conductive layers, the overall shielding performance can be further improved. An outstanding EMI shielding effectiveness (SE) of 53.3 dB is achieved with a thickness of only 0.17 mm. The composites show prominent bending resistance, which is proved by 1000 times of repeated bending leading to no obvious changes in structure. Moreover, the prepared composites exhibit excellent mechanical properties. Therefore, it is expected that this work will open up a facile strategy for exploiting materials with excellent EMI shielding properties and mechanical performance. [ABSTRACT FROM AUTHOR]

Sandwich-structured nanocomposites have the potential to improve the mechanical and electrical properties of materials simultaneously. Nanofibrillated cellulose (NFC) modified paper sheet (denominated as N) and softwood paper sheet (denominated as P) are used to prepare insulating paper. Different kinds of insulating paper with the structures of PPP, NNN, NPN and PNP are prepared. Tensile strength, DC conductivity, dielectric response, space charge and breakdown strength are measured. The activation energies of prepared materials are calculated through DC conductivity at 30, 50, 70, and 90 °C. The mechanism for sandwich structure regulating the mechanical and breakdown properties of insulating paper is discussed. Oil impregnated N/P/N paper has a remarkable improvement on tensile strength, conductivity, and DC breakdown strength, which provides a promising scheme to obtain the insulating paper with outstanding tensile and breakdown strength. [ABSTRACT FROM AUTHOR]

This is a review of studies on various types of paper-based epoxy composites currently being designed and developed for technological use. The concept of designing composite materials is very significant for small to large industry and it is important where initiation of repairing work is now being considered for engineering applications. This composite material is of interest due to its advantages compared with others, including low environmental effects and low cost for a wide range of works. This review aims to provide an overview of morphological, physical and mechanical properties of various paper sheetsbased epoxy composites and details of achievements made. From this approach, this paper also presents the preliminary study of SEM results of paper sheets-based epoxy composites designed for repairing work applications. It has been found that a well-arranged laminated paper sheet layers could help the bond strength with epoxy matrix. Thus, this paper sheet-based epoxy composite can be considered as an easiest way, cheap and biodegradable that can be used for various small repairing works in structural and automotive applications. [ABSTRACT FROM AUTHOR]

A cellulose-based oil adsorbent was developed utilizing the waste paper PS-16 (mixed kraft cuttings) via a simple modification process. Through mechanical treatment and spray with polyethylene wax and alkyl ketene dimer, it was found that the product was significantly more hydrophobic than the raw material, with a water contact angle of 125.6°. The capability of the product to absorb engine oil, kerosene, and xylene was studied and compared with other cellulose-based adsorbents. The adsorbent had an excellent performance with a high absorbing ability of 16 to 28 times its own weight. Up to 92.8% of the oil in the adsorbents could be easily recycled and collected by manual squeezing. The adsorbent could be reused over eight cycles, and the sorption capacity remained constant. Therefore, this adsorbent is expected to be a promising oil sorbent for potential applications like oil spill clean-ups. [ABSTRACT FROM AUTHOR]

Despite much research into and development within the complex area of the initial wet web strength of paper, no complete model has yet been developed to describe this property. This type of paper strength is the most important property to ensure an effective paper machine run. Furthermore, the process of strength development in the sheet forming and pressing portion of the process is the basis of the final paper strength. Recent investigations have focused on the surface interactions of fibers on the molecular level. There have also been several innovative findings about fiber swelling and the impact of swelling on the mechanical characteristics of fibers in wet conditions. Overall, progress obtained using new methodologies enables a deeper understanding of the mechanism of strength development. This review discusses these important areas by examining the literature and the authors' own work to obtain a better understanding of the strength development in wet paper webs. This paper highlights that the fiber morphology and the dryness of the wet web have the greatest impact on the strength of the wet web. As fiber sources and machinery are fixed, the fiber water gel is one of the easiest factors to adjust via the process water quality and the use of chemical additives. [ABSTRACT FROM AUTHOR]

The purpose of this work was to determine the optimal duration of free swelling for refined unbleached kraft pine pulp. Free swelling is the effect of water sorption by cellulose fibres without their simultaneous mechanical treatment (e.g. refining). The second purpose was to determine the possibility of improving the mechanical properties of paper by testing various combinations of refining and free swelling processes. The pulp SR value and water retention value (WRV) of the fibres were tested. As regards paper properties, the tensile index and tear index were tested. Based on the results obtained, it was found that for the pulp tested, refined to 35 °SR, the optimal time of free swelling was 70 min. It was also proved that the free swelling had a significant impact on both the WRV of fibres and the mechanical parameters of paper tested. For the scheme in which refining was followed by free swelling, a 7% increase in the tear index was obtained. However, an 11% increase in the tear index was attained for the scheme with three refining stages, followed by free swelling after each refining. [ABSTRACT FROM AUTHOR]

Magnesium hydroxide (Mg(OH)2) nanosheets were explored as an effective material for the restoration and conservation of paper-based cultural archives and compared with the commonly used Ca(OH)2 nanoparticles. The (Mg(OH)2) nanosheets were applied to filter paper as a reference, as well as to new and old paper samples. The effectiveness of Mg(OH)2 nanosheets was evaluated by (i) a pH test of the surface and the bulk extracts, (ii) measuring the alkaline reserve and correlating it with the enhancement in life expectancy, and (iii) in terms of mechanical strength. The alkaline reserve test indicated an increase in the alkaline buffer, which resulted in markedly reduced acidic content of the samples. It was inferred from the improved properties that Mg(OH)2 nanosheets coated the paper as a lamination sheet and protected it as the first line of defense against acidic environmental attack. Moreover, its presence within the paper acted as an alkaline reserve and also as reinforcement in the form of an inorganic nanosheet. The results suggest that the nanosheets are an innovative, compatible, and efficient material for the consolidation and restoration of old and new paper samples. [ABSTRACT FROM AUTHOR]