Search

The article presents a comparison of mathematical models of steam methane reforming. The analysis is divided into two parts. The first concerns the reforming process using separate steam reformers. The second part of the article compares models of steam methane reforming processes directly inside fuel cells. Due to the fact that the steam reforming process takes place at very high temperatures, internal steam reforming can only be carried out in high temperature fuel cells. Therefore, the second part of the article deals with molten carbonate fuel cells and solid oxide fuel cells powered by methane. In the case of both of fuel cells, the methane steam reforming may take place directly on the anodes of these electrochemical devices. The mathematical models (for both external and internal reforming) were compared based on available experimental data. In this analysis of mathematical models, particular attention was paid to the causes of discrepancies between the mathematical models and the experimental data. The steam reforming process is influenced by a number of different parameters such as: temperature, ratio of the amount of water vapor to carbon contained in the fuel (steam to carbon ratio), reaction time, presence of a catalyst, type of catalyst and many others. The models presented in this article were also compared in terms of taking into account various parameters that may affect the process of steam reforming. An attempt was also made to assess the accuracy of mathematical models. Unfortunately, for most of the equations considered in this article, numerical values for inaccuracies are not given or described as acceptable or minor. • Review of mathematical models of SMR. • The kinetics models of the steam methane reforming reaction. • Description of mathematical models for the molten carbonate fuel cell (MCFC). [ABSTRACT FROM AUTHOR]

It is proposed that dual conductive electrolytes have the potential to improve properties of MCFC by using oxygen ion conductors as matrix material, creating what is termed composite electrolyte. In this work we present the results of testing a novel type of electrolyte of molten carbonate fuel cell which consists of Yttria Stabilized Zirconia impregnated by Lithium/Potassium carbonates. Polarization curves were obtained for temperatures between 500 °C and 800 °C. Without very accurate measurements it is not easy to determine the additional electric charge provided by oxygen ions (O=). We made an attempt to build a mathematical model which takes into account both conductivities and, based on the model, estimated the ratio of electric charge provided by oxygen ions and carbonate ions. • We investigated double conducting electrolytes for Molten Carbonate Fuel Cell. • The investigation was done by both experimental and modeling methods. • We found small infuence done by ionic conductor. • The infunece is so small, that the results are not so evident. [ABSTRACT FROM AUTHOR]

Molten Carbonate Fuel Cells (MCFC) offer several advantages that are accelerating the research and development effort. Recent advances include improved materials, new fabrication techniques and new designs, flow configurations and applications. Nevertheless, several factors are holding back large scale implementation of fuel cells, especially in distributed energy generation, a major one being their long response time to changing parameters. Whereas alternative mathematical models of the molten carbonate fuel cell stack have been developed over the last decade, there are no reported analyses of regarding the application of models for emergency scenarios such as fuel cell malfunctions. This paper presents the 0D model of MCFC, calibrated to the appropriate available experimental data. This study investigates a generic molten fuel cell stack with nominal power output of 1 kWel. As daily, weekly and monthly variations in the electrical power load are expected, there is a need to develop numerical tools to predict the unit's performance with high accuracy. Hence, a fully physical dynamic model of an MCFC stack was developed and implemented in Aspen HYSYS 10 modeling software to enable predictive analysis of the dynamic response. The model is used to simulate a number of few malfunctions with 5. 66% broken cells in the stack. Losses of performance are obtained, manifested by rising operating temperature and falling power output. Moreover, a number of emergency operation scenarios were investigated, such as sudden loss of electric load, fuel and oxidiant supply. The presented model exhibits high accuracy and accounts for thermal and electrochemical processes and parameters. The paper presents the methodology used in the study to analyze the sensitivity of key scenarios such as load changes and emergencies. Further functionality of the model, which was validated using real operating data, is discussed. • Dynamic model of a Molten Carbonate Fuel Cell 1 kW stackis proposed. • The model was calibrated to the appropriate available experimental data. • The load changes and emergency situations were examined. [ABSTRACT FROM AUTHOR]