Search

Abstract: In the nuclear domain, precise and accurate isotopic composition determination of elements in spent nuclear fuels is mandatory to validate neutron calculation codes and for nuclear waste disposal. The present study presents the results obtained on Cs isotope ratio by mass spectrometric measurements. Natural cesium is monoisotopic (133Cs) whereas cesium in spent fuels has 4 isotopes (133Cs, 134Cs, 135Cs, and 137Cs). As no standard reference material is available to evaluate the accuracy of Cs isotopic measurements, a comparison of cesium isotopic composition in spent nuclear fuels has been performed between Thermal Ionization Mass Spectrometry (TIMS) and a new method involving Multiple Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICPMS) measurements. For TIMS measurements, isotopic fractionation has been evaluated by studying the behavior of cesium isotope ratios (133Cs/137Cs and 135Cs/137Cs) during the analyses. For MC-ICPMS measurements, the mass bias effects have been corrected with an external mass bias correction using elements (Eu and Sb) close to cesium masses. The results obtained by the two techniques show good agreement: relative difference on 133Cs/137Cs and 135Cs/137Cs ratios for two nuclear samples, analyzed after chemical separation, ranges from 0.2% to 0.5% depending on the choice of reference value for mass bias correction by MC-ICPMS. Finally the quantification of the 135Cs/238U ratio by the isotope dilution technique is presented in the case of a MOx (mixed oxide) spent fuel sample. Evaluation of the global uncertainties shows that this ratio could be defined at an uncertainty of 0.5% (k =2). The intercomparison between two independent mass spectrometric techniques is fundamental for the evaluation of uncertainty when no isotopic standard is available. [Copyright &y& Elsevier]

Abstract: The determination of 93Zr concentration, a long-lived radionuclide present in spent nuclear fuel and in the structural components of nuclear reactors, is a major issue for nuclear waste disposal purpose and to validate neutronic calculation codes. To measure 93Zr concentration in irradiated cladding material with a high precision, an analytical method based on the use of multiple collector-inductively coupled plasma mass spectrometer (MC-ICPMS) combined to isotope dilution technique was developed. First a radiochemical separation of zirconium from a zircaloy sample (a zirconium alloy used as a cladding material for nuclear fuel elements), has allowed to obtain a very pure zirconium fraction with no potential isobaric interferences for mass spectrometric measurements. Then as the determination of all zirconium isotope ratios in the sample is necessary for the isotope dilution method, a MC-ICPMS procedure was developed to perform these precise measurements. Finally, the determination of 93Zr concentration in the same sample was performed, after preparation and calibration of a 96Zr spike solution. The uncertainties obtained on isotope ratios of zirconium by MC-ICPMS were in the order of 0.1%. The final uncertainty obtained on the 93Zr concentration in the nuclear material used and after chemical purification was lower than 0.6%. [Copyright &y& Elsevier]

In this study, a new analytical procedure based on isotachophoresis (ITP) coupled to a multi collector inductively coupled plasma mass spectrometer named Stop-Flow-ITP-MC-ICPMS is developed for exhaustive and high-precision multi-elemental isotopic characterization. We demonstrate that Stop-Flow-ITP makes it possible to stop the analytes migration several times for a duration compatible with the detector configuration changes without losing the separation performance. With this procedure, isotope ratio measurements of four lanthanides of interest for nuclear applications (Nd, Sm, Eu and Gd) were obtained with a reproducibility better than 0.4% in a single analysis with only 20 ng of each element. A nebulization interface between ITP and MC-ICPMS composed of a dual inlet spray chamber and a multiple flow stream valve made it possible to perform isotopic reference standard injections for on-line mass bias correction by the sample standard bracketing approach. The flexibility of the Stop-Flow-ITP-MC-ICPMS procedure opens the way to online determination of isotope ratio measurements of multiple analytes present in a sample in a single analysis. [ABSTRACT FROM AUTHOR]

Abstract: In the general frameworks of the nuclear fuel cycle and environmental research field, the Cs isotopic composition must be known with high precision and accuracy. The direct determination of Cs isotopes by mass spectrometry techniques is generally hampered by the presence of Ba isobaric interferences however. Here we present a new method which takes advantage of the collision-reaction cell based Multiple Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICPMS) and allows to analyse Cs isotopes in the presence of Ba without prior separation step. The addition of N2O gas in the cell leads to an antagonistic behavior of Cs+ and Ba+ as the latter reacts with the gas to form BaO+ and BaOH+ products whereas Cs+ remains unreactive. The efficiency of the method was demonstrated for an UOx sample by comparing the results obtained (1) from the measurements of pure Cs fractions and (2) from Fission Products fractions containing more than 30 ionisable elements in addition to Cs, Ba, and where U and Pu were previously removed by using ion exchange resin. An excellent agreement is achieved between each set of experiments with an external reproducibility always better than 0.5% (RSD, k =2). This study confirms the strong potential of collision–reaction cell to measure Cs isotopes in presence of interfering Ba, precluding therefore former systematic chemical separations. [Copyright &y& Elsevier]