Search

This paper presents a dc-to-dc converter, which offers continuous input and output energy flow and low input current ripple, applicable and mandatory for photovoltaic (PV) arrays and maximum power tracking applications. The PV array yields exponential curves for current and voltage where maximum power occurs at the curve's mutual knee. Conventional dc-to-dc converters have a relatively high input current ripple which causes high power losses when connected to nonlinear sources like PV arrays. The proposed converter maximizes the power that can be sourced from the PV array, without the need of any electrolytic filtering capacitance. The effect of current ripple can be significant and decreases PV system efficiency. Converter simulations and experimental results support and extol the system concept. [ABSTRACT FROM PUBLISHER]

This paper presents a fuzzy logic controller (FLC)-based single-ended primary-inductor converter (SEPIC) for maximum power point tracking (MPPT) operation of a photovoltaic (PV) system. The FLC proposed presents that the convergent distribution of the membership function offers faster response than the symmetrically distributed membership functions. The fuzzy controller for the SEPIC MPPT scheme shows high precision in current transition and keeps the voltage without any changes, in the variable-load case, represented in small steady-state error and small overshoot. The proposed scheme ensures optimal use of PV array and proves its efficacy in variable load conditions, unity, and lagging power factor at the inverter output (load) side. The real-time implementation of the MPPT SEPIC converter is done by a digital signal processor (DSP), i.e., TMS320F28335. The performance of the converter is tested in both simulation and experiment at different operating conditions. The performance of the proposed FLC-based MPPT operation of SEPIC converter is compared to that of the conventional proportional–integral (PI)-based SEPIC converter. The results show that the proposed FLC-based MPPT scheme for SEPIC can accurately track the reference signal and transfer power around 4.8% more than the conventional PI-based system. [ABSTRACT FROM AUTHOR]

This study presents an optimisation technique for proportional-integral-derivative (PID) controller to achieve maximum-power-point tracking (MPPT) of single-ended primary-inductor converter (SEPIC). A new weight function is developed to optimise the PID parameters based on gradient-descent (GD) method by adding low-pass filter term. The proposed optimisation method does not stick in the local minima, which happens frequently with the traditional weight function used in GD method, where the low-pass filter term suppresses the noise and smooths the iteration process. The prototype of the proposed optimised PID-based SEPIC converter for photovoltaic inverter applications is built using DSP-based TMS320F28335. The performance of the proposed optimised PID-based MPPT scheme is tested in both simulation and experiment at different operating conditions. A performance comparison of the proposed GD method with the conventional GD PID is also made in real-time. It is found that the proposed optimised PID-based SEPIC converter is superior to the conventional GD PID controller in terms of power transfer and efficiency. Furthermore, the proposed optimised PID controller for two-level inverter can achieve a better total harmonic distortion (THD) level as compared to the multi-level inverter frequently used by researchers for the same purpose. [ABSTRACT FROM AUTHOR]