Search

Background: Migration of dental implants into the maxillary sinus is an uncommon, but increasingly reported complication. Implant migration may result from initial lack of primary stability, intrasinusal and nasal pressure changes, autoimmune reaction to the implant or incorrect distribution of occlusal forces. This retrospective study aims at analyzing the factors that may influence implant migration into the maxillary sinus cavity., Material and Methods: Fourteen patients presenting a total 15 implants that migrated into the maxillary sinus were recruited. Diagnosis of this complication was based on imaging techniques, such as cone beam computerized tomography scan and panoramic radiography. Clinical data were recorded in all cases and processed for statistical analysis., Results: ABH was below 6 mm in the majority of cases. However, almost 50% of the patients did not receive any site preparation treatment prior to implant insertion. Five patients (33.3%) were treated by osteotome techniques, but only one of them had bone grafting. Therefore, 73.3% of sites did not receive any biomaterial to increase available bone height. The most common complication-associated factors found on this study were related to implant design (cylindrical), implant dimension (diameter), implant restoration/rehabilitation method (partial removable denture), site-specific anatomy (initial residual bone height between 5 and 6.9 mm), demographics (age), and biomaterials., Conclusion: Patient selection and proper treatment planning, as well as the application of the appropriate sinus augmentation technique, are critical aspects that should be controlled to minimize the risk of implant migration into the maxillary sinus cavity., (© 2011 John Wiley & Sons A/S.)

Introduction: Maxillary sinus augmentation is a predictable implant site development technique, although several local and systemic factors may influence outcomes. The aim of this study was to evaluate healing patterns and bone remodeling activity following the use of two different graft mixtures for maxillary sinus augmentation., Materials and Methods: Patients in need of maxillary sinus augmentation were randomly assigned to two different groups. A graft mixture using a 50% autologous bone (AB) to 50% anorganic bovine bone (ABB) ratio was used in group 1, while a 20% AB to 80% ABB ratio was utilized for group 2. After a 6-month healing period, bone core biopsies were harvested for histological, histomorphometrical, and immunohistochemical analyses., Results: Twenty-eight subjects participated in this study. No statistically significant differences were found between groups in regards to vital bone and non-mineralized tissue proportions. Higher number of osteoid lines (18.05 ± 10.06 in group 1 vs. 9.01 ± 7.53 in group 2; P = 0.023) and higher cellularity, particularly regarding the number of osteocytes (631.85 ± 607.98 in group 1 vs. 219.08 ± 103.26 in group 2; P = 0.002), were observed in specimens from group 1. Differences in expression patterns of osteopontin and tartrate-resistant acid phosphatase were also detected between groups., Conclusion: AB to ABB ratio appears to influence bone remodeling patterns and cell content following maxillary sinus augmentation procedures. Similar proportion of vital bone was found in specimens obtained from both groups. More cellular presence was observed in samples containing higher proportions of AB., (© 2011 John Wiley & Sons A/S.)

Purpose: To document the clinical and histologic outcomes of sinus augmentation using a novel allogenic bone substitute as a sole grafting material., Materials: Patients in need of sinus augmentation before implant placement were recruited for this study. Sinus augmentation procedures were performed following a lateral approach, using a freeze-dried allograft as the only grafting material. Patients were followed up postoperatively for 6 months. Plaque score, wound healing, and patient discomfort were recorded at each follow-up visit. Implants were placed between 6 and 7 months after sinus augmentation and restored 6 months later. Bone core biopsy specimens were harvested at the time of implant placement and processed for histologic and histomorphometrical analysis. Vital bone, remaining allograft (RA) particles, and nonmineralized tissue percentages were assessed on each sample. Results were expressed as mean percentages with SD., Results: Of the 23 sinus patients, 20 patients underwent sinus augmentation surgery. All patients had satisfactory postoperative healing in the absence of complications. A total of 39 implants were placed. One implant failed and was replaced 3 months later. Histologic analysis revealed the presence of well-organized lamellar bone, in direct contact with RA particles. Mean vital bone was 23.02 +/- 19.11%, mean RA was 22.25 +/- 20.30%, and average nonmineralized tissue was 54.73 +/- 13.51%., Conclusion: Clinical and histologic findings support the suitability of an allograft consisting of a combination of cortical and cancellous chips for sinus augmentation procedures.

Background: Maxillary sinus augmentation is one of the most reliable implant site development options to increase vertical bone height. However, graft consolidation requires adequate angiogenesis and migration of cells involved in osteogenesis and bone remodeling. It is speculated that these biologic events are greatly determined by the dimensions of the maxillary sinus cavity. Hence, the purpose of this study is to assess the influence of the distance from the lateral to the medial wall of the maxillary sinus on the outcomes of sinus augmentation procedures., Methods: A total of 25 patients in need of sinus augmentation were recruited for the study. After initial examination, customized radiographic and surgical guides were fabricated and a cone-beam computerized tomography scan was obtained per patient. The bucco-palatal distance (BPD) was measured at 8, 10, and 12 mm from the alveolar crest. Sinus grafting was performed by a lateral window approach using a particulated allograft material. Patients were followed-up for 6 months. At the time of implant placement, bone core biopsies were harvested using the radiographic-surgical guide. Sections of the bone cores at 8, 10, and 12 mm from the alveolar crest were histomorphometrically analyzed. The proportion of vital bone (%VB) was correlated with the BPD using a statistical model., Results: Twenty-one patients underwent sinus augmentation for a total of 24 sinuses; however, the data analyzed contained only one sinus per patient. One sinus developed an infection after grafting, resulting in a 96% success rate for the sinus grafting procedure. Twenty sinuses were used in the final statistical analysis. Histomorphometric analysis revealed that mean %VB was 22.71 +/- 19.08, mean percent of remaining allograft was 23.39 +/- 20.85, and average percent of non-mineralized connective tissue was 53.90 +/- 13.23. Analysis of the correlation between %VB and BPD by linear regression, using the actual values of BPD showed a strong negative association (R(2) = 0.141; P <0.001)., Conclusion: The findings suggest that the %VB formation after maxillary sinus augmentation is inversely proportional to the sinus BPD.

Introduction: Sinus grafting is a technique oriented to facilitate implant placement in posterior atrophic maxillae. Several modifications of the original technique and a wide variety of materials have been proposed; most of them associated with implant survival rates. However, the quality of the bone obtained after the application of certain grafting materials has not been fully elucidated yet. The aims of this multicenter study were to analyse histomorphometrical samples obtained 6 months after sinus grafting using a composite graft consisting of anorganic bovine bone (ABB)+ autologous bone (AB), and to compare these samples with maxillary pristine bone biopsies., Material and Methods: Ninety maxillary sinus augmentations were performed for delayed implant placement (N = 90) in 45 consecutive patients (test group). Bone cores were harvested 6 months after grafting for histomorphometric and ultrastructural study. Control pristine bone biopsies were taken from the posterior maxilla of 10 patients (control). Bone radiographic changes were assessed up to 24 months after implant loading., Results: The total mean values after analysis of test cores revealed a proportion of 46.08 + or - 16.6% of vital bone, 42.27 + or - 15.1% of non-mineralized connective tissue, and 37.02 + or - 25.1% of the remaining ABB particles. Significant bone remodeling activities were noticed in sinus grafting samples when compared with pristine bone. A statistically significant difference was observed in the number of osteoid lines between two groups, with higher values in the test one (15.1 + or - 11.48% vs. 2.5 + or - 2.2%, P = 0.0005). Ultrastructural study showed that vital trabecular bone was in intimal contact with ABB particles. Radiographic analysis revealed that the higher the proportion of remaining ABB, the lower the total vertical resorption of the graft., Conclusion: Sinus grafting constitutes an excellent model for the study of de novo bone formation patterns and graft consolidation, when a combination of different bone substitutes is applied. The combination of ABB+AB yields highly satisfactory outcomes from both a clinical and a histologic perspective.

Background: The performance of implant surgery in the posterior maxilla often poses a challenge due to insufficient available bone. Sinus floor elevation was developed to increase needed vertical height to overcome this problem. The present study described and reported a simple, safe and predictable bone graft mixture for the sinus lifting procedure., Material and Methods: Seventy patients were recruited for this study and underwent a sinus lift procedure. All sites were treated with a composite graft of cortical autogenous bone, bovine bone and platelet-rich plasma (PRP). A total of 263 implants (171 Astra Tech and 92 Microdent) were placed either simultaneously or delayed. All sites were clinically and radiographically evaluated 24 months after their prosthetic loading. Biopsy samples were taken from 16 delayed implant placement sites at the time of their implant placement., Results: A 100% implant success rate was found after 24 months of functioning. Only two Microdent implants failed before loading, which translates to a 99% overall implant success rate. No statistically significant differences were found between simultaneous and delayed implant placement. Image processing revealed 34+/-6.34% vital bone, 49.6+/-6.04% connective tissue and 16.4+/-3.23% remaining Bio-Oss particles. However, the histomorphometric analysis showed that the bovine bone was incorporated into new bone formation., Conclusion: The results showed that a composite graft comprised of cortical autogenous bone, bovine bone and PRP mixture can be successfully used for sinus augmentation.

Invasion of the maxillary sinus is a relatively frequent complication in dental implant treatment of patients with inadequate bone height in the posterior maxilla. This event usually occurs during surgery and sometimes produces sinusitis. There is a paucity of reports in the literature of implants migrating into the sinus cavity after a period of function. In the 2 clinical cases presented, an intraosseous apical movement of the implants was produced several years after placement of the implants. Hypotheses and possible mechanisms by which an implant may migrate into the maxillary sinus are described.